http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김치성(Chisung Kim),한동석(Dong Seog Han) 대한전자공학회 2016 전자공학회논문지 Vol.53 No.12
광용적맥파(PPG: photoplethysmogram) 신호는 심전도(ECG: electrocardiogram) 신호와 더불어 가장 많이 측정이 되는 생체 신호 중 하나이다. 광용적맥파 신호를 이용하여 측정할 수 있는 정보들은 혈류의 속도, 혈액 중 산소 포화도 등을 측정할 수 있다. 이들을 측정하기 위한 기반 정보는 맥박 정보이다. 광용적맥파 신호로부터 맥박을 측정하기 위하여 동적 잡음이 필수적으로 제거 되어야 한다. 기존 방법은 팔의 움직임을 나타내는 가속도 신호를 이용하여 동적잡음을 제거 하였지만 이는 계산 복잡도를 증가시켜 실시간으로 맥박을 추정하기에 어려움이 있다. 본 논문에서는 광용적맥파 신호만 사용하여 신호를 측정함과 동시에 맥박을 추정해내는 알고리듬을 제안한다. The photoplethysmogram (PPG) signal is one of the mainly considered bio signals along with the electrocardiogram (ECG) signal. PPG signals can be used to estimate the speed of flow of blood in vein, saturation of peripheral oxygen and etc. The heartbeat rate is a common feature in order to evaluate those checkup lists. To estimate the correct heartbeat rate, dynamic noises must be removed in the PPG signal. Conventionally, the acceleration signal is used to remove dynamic noises. This method, however, increases the computational complexity. In this paper, we proposes a solution that uses only PPG signals to calculate the heartbeat rate, and which can be used as a basement in real-time healthcare solution.
레이저 열화상 기법과 CNN 딥러닝을 이용한 용접부 표면의 자동 균열 검출 기술 개발
김치성(Chisung Kim),황순규(Soonkyu Hwang),정준연(Junyeon Chung),손훈(Hoon Sohn) 한국비파괴검사학회 2020 한국비파괴검사학회지 Vol.40 No.3
본 연구에서는 레이저 열화상 시스템과 균열 검출 알고리즘 개발을 통해 용접부에서 균열을 자동검출하는 기술을 연구하였다. 레이저 열화상 시스템은 레이저 가진으로 인해 균열부에서 발생하는 열파 집중현상을 관측하도록 구성되었다. 균열 검출 알고리즘은 (1) 온도 분포 특성을 이용한 열화상 이미지 병합으로 균열을 가시화하고, (2) 과적합을 방지하는 input 이미지 생성과 (3) CNN 딥러닝을 통해 균열부의 특징을 분석, 분류하여, (4) 원본 열화상 이미지에 균열의 위치를 Masking 한다. SUS 시험편 2개로 개발 기술을 검증하였고, 현미경과 액체침투법으로 확인한 실제 균열 정보와 비교하였다. 시험편 #1의 균열 이미지 618 개와 정상 이미지 1834개로 CNN 을 훈련시켰다. 시험편 #1과 #2의 총 9개 영역을 각 300개의 Test 이미지로 나눠 훈련된 알고리즘 성능을 검증해본 결과, 총 균열 14개 중 13개를 검출하였고, 정상 이미지 4개가 과검출되었다. 따라서 개발된 알고리즘은 용접부에서 용접의 복잡한 패턴과 구별하여 균열을 검출할 수 있다. In this study, automatic crack detection for welded surfaces was studied through the development of a laser active thermography system and a crack detection algorithm. The laser active thermography system observes thermal wave concentrations in the crack while exciting the surface of the weld. The crack detection algorithm (1) visualizes the cracks by merging the infrared (IR) images using the temperature distribution characteristics; (2) employs input image generation with a specific method to prevent overfitting; (3) analyzes and classifies the characteristics of the cracks using a deep learning convolutional neural network (CNN); and (4) marks the location of the cracks in the original IR image. The system and algorithm were verified using two SUS specimens (#1 and #2) and compared with actual crack data obtained by microscopy and penetration test. The CNN was trained with 618 images of cracks and 1834 images of intact specimen #1. For performance verification, a total of nine areas of specimens #1 and #2 were divided into 300 test images; 13 out of 14 cracks were detected while four intact images were overdetected. Thus, the developed algorithm can detect cracks in welded surfaces by distinuishing them from complex patterns of welding.