http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이음면 이격이 확장형 단부판 이음부 성능에 미치는 영향에 대한 실험적 연구
김철환,이명재,김희동,김사빈,Kim, Cheol Hwan,Lee, Myung Jae,Kim, Hee Dong,Kim, Sa Bin 한국강구조학회 2016 韓國鋼構造學會 論文集 Vol.28 No.6
This study is experimental research for the effect of gap at the end plate on the performance of extended end-plate type splice. For this research, simple beam type specimens by using extended end-plate type splice are planned. Main variables are the initial gap between end-plates, the installation of finger shim plate before the installation of high tension bolts, the final gap between end-plates, and the installation of finger shim plate after the installation of high tension bolts. The static loading tests results show that the maximum bending strength of splice is not dependent on the gap, but the vertical displacement, initial stiffness and elastic stiffness are affected by the gap. In addition to that, the possibility of brittle fracture is increased when the torque of high tension bolt is used to control the gap. Thus, careful consideration is needed in this case. 두본 연구는 실험적인 방법을 통하여 단부판 이음부의 이음면에서 초기 오차로 발생하는 이격이 이음부의 내력 및 거동에 미치는 영향을 평가한 연구이다. 이를 위하여 총 5가지의 단순보형 실험체를 확장형 단부판 이음부를 이용 계획하였고 주요 변수로는 이음면 초기 이격(gap) 여부, 고력볼트 채결 전 끼움판(finger shim plate) 설치 유무, 고력볼트 체결 후 이음면 이격, 고력볼트 채결 후 끼움판 삽입 여부를 적용하였다. 정적가력실험 결과 이음판의 이격은 이음부의 최대휨강도에 미치는 영향은 제한적이나 수직변형과 초기 및 탄성강성에는 영향을 미치는 것으로 나타났으며, 이격을 제어하기 위해 고력볼트 장력을 이용할 경우 고력볼트의 취성파괴 우려도 있는 것으로 나타나서 이들에 대한 충분한 고려가 필요할 것으로 판단된다.
콘크리트충전 각형강관기둥-보 핀접합부의 거동에 관한 실험적 연구
김철환,이은택,김성은,Kim, Cheol-Hwan,Lee, Eun-Taik,Kim, Seong-Eun 한국강구조학회 2000 韓國鋼構造學會 論文集 Vol.12 No.4
In order to clarify the behavior of beam-to-concrete filled steel tube column under cyclic loading condition, experimental studies were carried out on shear connections. Test parameters of this study are the width-to-thickness ratio and the effect on beams with or without slab and diaphragm. Test results show that the moment-rotation relationships of connections without slab are in the range of AISC regulation of pinned connections and the rotation capacity of connection is dependent upon the width-to-thickness ratio of the column. 콘크리트 충전각형강관 기둥-보 핀접합부를 대상으로 접합부의 회전강성, 전단내력 등 역학적 특성을 규명하기 위하여 실험을 수행하였다. 실험변수는 강관기둥의 폭-두께비 및 강관 내부의 수평 다이어프램, 슬래브 설치 유무이다. 기둥의 폭-두께비가 큰 시험체가 폭-두께비가 작은 시험체에 비하여 접합부의 회전강성이 낮으며, 변형도 접합부에 집중되어 발생한다.
김철환,채원탁,Kim, Cheol Hwan,Chae, Won Tak 한국강구조학회 2002 韓國鋼構造學會 論文集 Vol.10 No.3
본 연구에서는 단부 철근콘크리트구조와 중앙부 철골구조로 이루어진 복합구조 보를 대상으로 내력 및 강성, 변형능력을 평가하기 위해 반복재하 실험을 행하였다. 주된 실험변수는 철근콘크리트와 철골보의 이종구조 이음부부의 응력전달을 위해 철골보에 접합되는 철근의 개수와 단부 콘크리트를 구속하여 강성을 상승시킬 목적으로 설치되는 부착판의 설치유무이다. 실험결과 모든 실험체가 방추형의 이력 거동을 나타내며 안정된 거동을 하였으며, 내력에 있어서는 부착판 설치 실험체의 경우가 기본형 실험체 보다 높게 나타났다. 또한, 강성에 있어서도 단부에 부착판을 설치한 실험체가 설치하지 않은 실험체에 비하여 보다 높게 나타났으며, 모든 실험체가 최대 내력시의 부재각이 0.03rad. 이상의 변형능력을 나타내고 있다. The beam of composite structure composed of the RC structure in the end part and steel structure in the central palt were investigated during cyclic loading, in order to evaluate strength, stiffness, and deformational capacity. The parameters used in this study include the amount of reinforced steel bar between the steel beam and RC structure and the existence of the sticking plate. Test results showed that all specimens had stabilized hysteresis loops. Likewise, the specimens with sticking plate had higher load-carrying capacity compared with the one without it. In addition, the stiffness of the composite structure was higher than the steel structure. All specimens also showed good rotational capacity.
김철환,Kim, Cheol-Hwan 한국정보통신집흥협회 1996 정보화사회 Vol.103 No.-
CALS 추진의 주요 목표는 수동적이고, 서류중심인 정보를 국제 공통표준으로 디지털화시켜 통합적이고 자동화된 기술정보 공유 및 전송과정의 전환이며, 이와 같이 자동화되고 통합된 모습은 통합 데이터베이스(IDB)가 될 것이다. 이러한 CALS추진에 대한 구조적인 접근은 하부구조 현대화, 업무과정 혁신, 디지털 자료 획득, 그리고 기업통합으로 나타낼 수 있다. CALS 전략의 실행은 산업활동의 전 순기를 통하여 크게 하부구조 현대화, 업무과정 혁신, 디지털자료획득, 기업통합 등 4가지 요소들을 설명함으로써 가능하다.
김철환,Kim, Cheol-Hwan 한국방위산업진흥회 2000 國防과 技術 Vol.- No.252
한국의 TMD 참여문제는 실효성 문제, 경제적인 문제, 기술적인 문제 등으로 볼 때 유보하는 것이 바람직하다고 생각된다. 따라서 북한의 탄도 미사일에 대한 방어체계 구축은 동맹국의 TMD 체계와 상호 운용성을 보장할 수 있으며, 주변국으로부터 군비 확충에 대한 의심을 불식시킴과 동시에 한국적 여건에 가장 적합한 미사일방어체계(KAMD:Korea Air and Missile Defense)에 대한 개념연구의 선행이 필요하다.