http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
비만 범용 처방(處方)에 대한 탕전후(湯煎後) 경락 기능 진단기(QRIS)의 비만 연관 Code측정 및 수침후(水浸後) Free Radical 측정기를 이용한 측정에 대한 고찰
김재중,임형호,선유진,이동훈,Kim, Jae-Joong,Lim, Hyung-Ho,Sun, Yu-Jin,Lee, Dong-Hoon 척추신경추나의학회 2000 대한추나의학회지 Vol.1 No.1
Oryeong-San, Pangpungtongseong-San, Rangkyeoksanwha-Tang, Sipeemikwanjoong -Tang and Taeumjoui-Tang are not only examined using the code which are related to overweight in the QRIS but are also investigated the level of Free Radical using the Free Radical Measurement after steeping those 5 prescriptions in water. The results are as follows: 1. We indicated in the study of QRIS that 5 kinds of medicines which used most frequently In the treatment of the obesity appeared to affect the Immune system, spleen, kidneys, pancreas, the fatigue toxicity, TSH, and the metabolic disability but did not influence high on the contents of overweight and those of fatty cell, as well. in addition, there were no significant differences between the prescriptions as regards testosterone and progesterone. 2. In the Free Radical Measurement, Rangkyeoksanwha-Tang evaluated significantly high level of Free Radical, whereas others appear to have the similar level of Free Radical. These findings suggest that the treatment of the obesity affects particular body parts with respect to the control of overweight, although those medicines are not related directly to the areas(such as fatty cell Code), it is possible that they influence on the cure for the obesity. Furthermore, they indicate that with soaking prescription, Free Radical is not produced as much as we expected.
정기보전에서 소수리를 고려한 무상수리 정책에서의 비용분석 모델
김재중(Jae Joong Kim) 대한설비관리학회 2002 대한설비관리학회지 Vol.7 No.2
N/A This paper is concerned with cost analysis model in free-replacement policy. The free-replacement policy with minimal repair is considered as follows: in a manufacturer`s view point operating unit is periodically replaced, if a failure occurs between minimal repair and periodic maintenance time, unit is remained in a failure condition. Also unit undergoes minimal repair at failures in minimal-repair interval. Then total expected cost per unit time is calculated according to parameter of failure distribution in a view of consumer`s. The expected costs are included repair cost and usage cost: operating, fixed, minimal repair and loss cost. Numerical example is shown in which failure time of item has beta distribution.
김재중(Jae-joong Kim),김기철(Ki-cheol Kim),윤재선(Jae-seon Yoon) 동아대학교 해양자원연구소 2007 동아대학교 해양자원연구소 연구논문집 Vol.19 No.-
Wave monitoring around in the Ulsan New Port area is proceeding by Hyundai construction company form Nov. 2005 by using USW300 which is supplied by KAIJO (Japan Manufacturer). The observed data was analyzed in this study and the observation period is from Nov. 2005 to Oct. 2006. The analyzed significant wave heights, max. wave height, significant wave period and max. wave period are included in this study. The seasonal data analysis is also proceeded and the results are shown. The observation period is less than one year and some period (May. 2006, Apr. 2006 and Jul. 2006) was missing and thus the analysis is not sufficient for having a good results. The wave monitoring in the Ulsan New Port area is subjected to go the end of Jan. 2008. And thus the results of this study will be covered afterward.
DELFT-3D를 이용한 울산신항 주변해역의 파랑특성에 관한 연구
김재중(Kim Jae-Joong),김남현(Kim Nam-Hyun) 동아대학교 해양자원연구소 2005 동아대학교 해양자원연구소 연구논문집 Vol.17 No.-
Environmental problems and safety problems in coastal area is one of the most important factors for designing coastal structures and maintaining facilities in coastal zone. And thus study on Wave transformation around coastal area is very important to develope a new port or on industrial area.<BR> Delft 3D-WAVE is applied to Ulsan new port area and the calculated results are analysed and compared with measured data.<BR> Delft 3D-wave module is based on SWAN model which considers wave shoaling and refraction for irregular wave. This module also covers wind effect, bottom friction, white-capping and wave breaking effect.<BR> The results of this study show a good agreement with measured data and thus Delft 3D-WAVE module can be applied to simulate wave transformation in coastal area.
논문 : 기계적 성질 ; 용탕단조된 Mg-Al-Zn-Si합금의 미세조직 및 파괴거동
김재중 ( Jae Joong Kim ),추성훈 ( Seong Hun Choo ),김도향 ( Do Hyang Kim ),김락준 ( Nack J. Kim ) 대한금속재료학회 ( 구 대한금속학회 ) 1998 대한금속·재료학회지 Vol.36 No.6
Microstructure and fracture behavior of the squeeze cast Mg-Al-Zn-Si alloys (AZ91-Si, AZ51-Si, AZ51 Si-Ca) have been investigated in the present study. To clarify the fracture behavior, in-situ fracture test and fractographic observation were conducted. The higher Al content promoted formation of the polygonal type Mg2Si, but resulting in reduction of the ductility due to increase in amount of Mg17Al12 and to presence of coarse Mg2Si. The lower Al content favored formation of the chinese script type Mg2Si which promoted the brittle fracture along the Mg2Si/matrix interface. AZ51-Si alloy had a higher ductility than AZ91-Si, because a number of slip lines were developed inside grains and cracks were blunted by matrix. The addition of Ca eliminated the chinese script type Mg2Si. Instead, fine Mg2Si particles were present in a polygonal shape, resulting in improvement of mechanical properties.