http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
장기현장실습이 취업 후 직무만족에 미치는 영향 - 조직몰입도, 직무일치도의 매개효과를 중심으로
김성희,이상곤,Kim, Sung-Hui,Lee, Sang Kon 한국공학교육학회 2017 공학교육연구 Vol.20 No.5
The purpose of this study was to investigate the effect that completing long-term on-site training with varying grades of success had on the job satisfaction of former university students after obtaining employment. Although the grades themselves achieved during long-term on-site training did not directly affect job satisfaction, positive effects on job satisfaction were shown due to the mediating effects of job match and organizational commitment. The results of this study are as follows: First, it was found that employees who participated in long-term on-site training showed different results in belonging and attachment to their organizations according to their achievement. The higher the grades during long-term on-site training, the higher the degree of reported job match and organizational commitment, suggesting a positive correlation with job satisfaction. Therefore, long-term on-site training should not be operated as simply a program for temporary experiential learning, but instead should be optimized by companies and schools to motivate their students to achieve high grades for the purpose of their future job satisfaction.
영상처리 기반 손동작 인식 자동차 주행 제어 시스템 연구
김희준(Hui-Jun Kim),김동현(Dong-Hyun Kim),김성희(Sung-Hee Kim) 한국HCI학회 2024 한국HCI학회 학술대회 Vol.2024 No.1
자율주행 기술이 발전하면서 자동차 운전석의 공간이 주행 제어 시스템에서 여가 또는 업무를 보는 생활공간으로 변화할 것이라고 보고 있다. 하지만, 완전자율 주행 도입 이전에는 운전자에 대한 제어권 확보 및 이양도 중요하게 연구되고 있다. 본 연구에서는 이러한 간극을 줄이기 위하여 물리적인 공간을 차지하지 않는 영상처리 기반의 자동차 주행제어 시스템을 제안하고자 하며, 해당 시스템은 운전자의 손동작 인식을 통해 자동차 주행 제어를 하였다. 조작 방식은 기존의 자동차 주행 제어 시스템을 모방하여 운전자들이 쉽게 습득하여 해당 시스템에 대한 낮은 거부감을 느끼도록 설계하였다. 또한, 실험용 자동차를 원격으로 조정하는 실험을 주행만족도 항목들은 평균적으로 보통 이상의 만족도를 보이는 추세를 나타내며, 조작 난이도와 해당 시스템의 거부감은 낮은 추세를 나타내었다. 이런 결과를 통하여 본 연구에서 제안하는 영상처리 기반 자동차 제어시스템은 자율 주행 기술 발전에 따른 운전 이외 행위를 위한 실내 공간으로 활용을 가능하게 하면서도 운전자가 직접 자동차를 제어할 수 있는 운전자와 자동차 간 상호 작용방식을 구현한 것에서 의의를 가진다.
Requirements 분석을 위한 DFD Editor 및 Evaluator의 설계 및 구현
한상만,박경범,김성희,송영기,Han, Sang-Man,Park, Gyeong-Beom,Kim, Seong-Hui,Song, Yeong-Gi 한국전자통신연구원 1985 전자통신 Vol.7 No.4
Requirements 분석 tool은 시스팀의 개발 단계중 한 단계인 Requirements 분석의 자동화를 위한 것으로 입력된 Requirements의 정보를 데이터베이스에 수록하고 수록된 정보를 이용하여 데이터의 consistency 및 completeness를 조사 분석하는 도구이다. 본 논문은 이 Requirements 분석 tool의 설계상의 구성과 입력될 Requirements를 Data Flow Diagram(DFD)으로 구현하기 위한 editor와 evaluator에 관한 설계 및 구현에 대해 기술한다.
연정흠(Jeoung-Heum Yeon),김성희(Seong-Hui Kim),고대호(Dai-Ho Ko),이승훈(Seung-Hoon Lee),용상순(Sang-Soon Yong) 한국항공우주연구원 2009 항공우주산업기술동향 Vol.7 No.1
세계적인 관심이 고조되고 있는 환경 및 기후변화는 사회 전분야에 걸쳐 폭넓게 영향을 미치고 있다. 최근들어, 환경감시의 필요성과 이에 대한 관심의 고조와 더불어 원격탐사기술의 발전으로 인공위성을 이용한 환경감시가 본격화되고 있다. 본 논문에서는 환경감시 탑재체의 개발동향을 살펴본다. 지금까지 개발되었거나 개발되고 있는 환경탑재체들의 주요 규격 및 관측방식, 관측대상 등을 사례별로 조사하여 소개하였다. 하나의 위성으로 전지구 관측을 위하여 저궤도 탑재체를 중심으로 개발이 이루어졌으나, 최근들어 시간해상도의 중요성이 강조되면서 정지궤도 탑재체의 개발도 이루어지고 있다. 또한 관측대상에 따라 자외선, 가시광선, 적외선 등의 탐측대역을 달리한 탑재체가 개발되고 있다. 향후 국내 환경탑재체의 개발은 이러한 추세를 고려하여 명확한 임무분석과 함께 추진되어져야 할 것이다. Environment and climate changes affect all aspects of our society, and its researches are rapidly growing recently. The enhanced remote sensing technology made the satellite to be widely used in the environment monitoring applications with the increased worldwide interests. In this paper, recent development trends of environment monitoring payloads are researched. The major specifications, observational methods and objects of each payloads are surveyed and described. The environment monitoring payloads have been developed for the low-earth-orbit satellite to cover the entire earth area with single satellite. However, as the importance of time-scale resolution increases, payloads for geostationary orbit are under developing recently. Also, ultraviolet, visible, and infrared observation payloads are being developed depending on the monitoring objects. According to these trends, domestic environment monitoring payloads have to be developed with clear and careful mission analysis.
김종관,채중규,조규성,김성희,서혜연,Kim, Chong-Kwan,Chai, Jung-Kiu,Cho, Kyoo-Sung,Kim, Seong-Hui,Suh, Hye-Yuhn The Korean Academy of Periodontoloy 1996 Journal of Periodontal & Implant Science Vol.26 No.3
탈회냉동건조골 (DFDBA)과 ePTFE막을 사용한 경우와 ePTFE만을 사용한 경우의 조직유도 재생술의 효과를 관찰하였다 . 12명의 환자에서 12개의 골내낭결손부(한 환자당 하나의 결손부)를 통상적인 치주수술 시행한 경우를 대조군(GFS)으로 , 12명의 환자에서 12개의 결손부는 ePTFE(GTR)막 만으로 , 또 다른 환자의 12개결손부는 ePTFE+DFDBA로 시행하였다. 창상안정과 감염방지를 강조한 술후계획이 사용되었다. 술후 6개월째 임상적 치유상태를 평가 하였다. 대조군에서 치주낭깊이, 부착수준, 탐침골깊이, 치은퇴축의 각각의 평균치는 $3.4{\pm}1.3mm$, $2.0{\pm}1.2mm$, $1.3{\pm}2.0mm$, $-1.7{\pm}0.8mm$, GTR 군에서는 $4.3{\pm}l.3mm$, $3.1{\pm}1.5mm$, $4.2{\pm}2.2mm$, $-11{\pm}1.4mm$ 그리고 GTR+DFDBA 군에서는 $3.4{\pm}2.1mm$, $2.4{\pm}1.9mm$, $2.6{\pm}1.6mm$, $-1.2{\pm}1.7mm$를 보였다. 대조군과 GTR+DFDBA 군의 술전 평균 치주낭깊이는 각각 $6.9{\pm}1.1$, $7.4{\pm}1.2$, $7.0{\pm}2.0mm$였다. GTR, GTR+DFDBA군에서는 뚜렸한 치주낭감소와 부착획득을 보였다(P<0.01). GTR, GTR+DFDBA 에서는 대조군에 비해 탐침골수준의 뚜렷한 향상을 보였으나(P<0.001), GTR 과 GTR+DFDBA 사이에는 뚜렷한 차이가 없었다. 이 실험결과로 골내낭 결손부에서 GTR과 GTR+DFDBA의 사용은 골형성을 제외한 임상결과 에서 대조군과 유사한 결과를 보였다.
송수진 ( Song Su Jin ),김철호 ( Kim Cheol Ho ),김성희 ( Kim Seong Hui ),박은영 ( Bak Eun Yeong ),박근식 ( Bak Geun Sig ),문화숙 ( Mun Hwa Sug ),김경서 ( Gim Gyeong Seo ),주보선 ( Ju Bo Seon ),김상갑 ( Gim Sang Gab ) 대한산부인과학회 2003 Obstetrics & Gynecology Science Vol.46 No.12
목적 : 내시경하 자궁근종절제술의 learning curve를 결정하고 효율성과 유용성에 대해 보고하고자 한다. 연구 방법 : 1996년부터 2002년까지 문화병원 산부인과에서 한 명의 주술자에 의해 시행된 26예의 개복하 자궁근종절제술 (I군)과 59예의 내시경하 자궁근종절제술 (II군)에 대해 후향적인 연구를 진행하였다. II군을 다시 learning curve동안 (1996-1998년)에 시행한 17예 (IIA군)와 learning curve (1 Objective : To evaluate the effectiveness and feasibility of laparoscopic myomectomy compared to open myomectomy Methods : A retrospective study of 85 cases of myomectomy was performed. Twenty six cases of open myomectomy (group I) and 59 cases of laparos