Al-Zn 혼합물의 열 증발을 이용한 ZnO 결정의 합성에서 결정의 형상에 미치는 합성 온도와 시간의 영향

김민성,Kim, Min-Sung 한국재료학회 2015 한국재료학회지 Vol.25 No.6

ZnO micro/nanocrystals at large scale were synthesized through the thermal evaporation of Al-Zn mixtures under air atmosphere. The effect of synthetic temperature and time on the morphology of the micro/nanocrystals was examined. It was found that the temperature and time affected the morphology of the ZnO crystals. At temperatures below $900^{\circ}C$, no crystals were synthesized. At a temperature of $1000^{\circ}C$, ZnO crystals with a rod shape were synthesized. With an increase in temperature from $1000^{\circ}C$ to $1100^{\circ}C$, the morphology of the crystals changed from rod shape to wire and granular shapes. As the time increased from 2 h to 3 h at $1000^{\circ}C$, tetrapod-shaped ZnO crystals started to form. XRD patterns showed that the ZnO crystals had a hexagonal wurtzite structure. EDX analysis revealed that the ZnO crystals had high purity. It is believed that the ZnO nanowires were grown via a vapor-solid mechanism because no catalyst particles were observed at the tips of the micro/nanocrystals in the SEM images.

플래시를 이용한 웹기반 수업에 관한 고찰

김민성,박성훈,Kim, Min-Sung,Park, Sung-Hoon 한국디지털콘텐츠학회 2010 한국디지털콘텐츠학회논문지 Vol.11 No.2

웹기반 교육은 학습자 중심의 학습과 협동학습을 촉진시킬 수 있는 새로운 수업도구로서 기존의 획일화된 교수-학습 방식에서 탈피하여 새로운 교수모형에 대한 연구로 발전되고 있다. 강력한 웹 저작도구중 하나인 플래시를 사용하면 컴퓨터 그래픽, 애니메이션과 사운드 그리고 동영상 등의 활용으로 학습의 효과를 극대화 시킬 수 있다. 본 논문에서는 플래시를 사용한 교육 자료의 개발 및 배포와 효율적인 웹기반 수업에 대하여 고찰하고자 한다. Web-based instruction is being developed as a new study model getting out of the traditional standardized education method. It is a new education tool which promotes learner-centered and cooperative study. Flash, as one of the most powerful web authoring tool can maximize the effectiveness of learning using computer graphic, animation, sounds and video. In this paper, we will look at developing and distributing education materials using flash and the efficient web-based instructions.

참옻 추출물의 MCF-7 인체 유방암 세포에서 증식 억제효과

김민성,안원근,이장천,Kim, Min Sung,An, Won Gun,Lee, Jang Cheon 대한한의학방제학회 2016 大韓韓醫學方劑學會誌 Vol.24 No.4

Objectives : The purpose of this study was to investigate the anti-cancer effects of extract of Rhus verniciflua Stokes (RVS) in human breast cancer cell lines. Methods : In cultured human breast cancer MCF-7 cells, we investigated growth inhibitory effect of RVS. MCF-7 cells were cultured with various concentrations (0, 200, 300, and 400 ug/ml) of RVS at $37^{\circ}C$ for 24 h. We performed CCK-8 assay and flow cytometry for detection of Annexin V-PI staining. Results : As a result, RVS inhibits the cell growth and induction of apoptosis in dose dependent manner in MCF-7 breast cancer cells. Conclusion : RVS has anti-cancer activities and induced apoptosis in human breast cancer MCF-7 cells. Therefore we suggest that RVS can use as a novel class of anti-cancer drugs.

직렬 연결 위상 천이 장주기 격자의 특성과 초기 커플링 세기 효과에 관한 연구

김민성,한영근,Kim, Min-Sung,Han, Young-Geun 한국광학회 2006 한국광학회지 Vol.17 No.1

위상 천이 광섬유 격자를 직렬로 연결하였을 경우 파장 투과 특성에 대해서 이론 및 실험적으로 분석하였다. $\pi$만큼의 위상 천이가 유도된 장주기 격자의 파장 투과 특성은 직렬 연결되는 위상 천이 장주기 격자의 개수에 따라 변화하며 개수를 증가시킴에 따라 파장 투과 대역폭을 증가시킬 수 있다. 또한 $\pi$-위상 천이 장주기 격자의 파장 투과 대역폭은 격자 길이를 변화시킴에 따라 조절할 수 있으며 길이가 다른 두 개의 $\pi$-위상 천이 장주기 격자를 직렬로 연결하면 파장 투과 및 제거 대역폭을 조절할 수 있다 그리고 장주기 격자의 반을 UV에 노출 시켰을 때, 위상 천이 장주기 격자가 형성됨을 관찰하였고, 초기 커플링 세기에 따라 격자의 형성이 달라짐과 인가되는 인상 천이 크기에 따라서 다양한 형태의 위상 천이 장주기 광섬유 격자의 투과 특성을 나타내었다. The transmission characteristics of multiply cascaded phase-shifted long-period fiber gratings(LPFGs) were investigated theo-retically and experimentally. Their passband can be changed by increasing the number of p-shifted LPFGs. When two p-shifted LPFGs with different grating lengths are cascaded in series, the bandwidth of the rejection band and passband can be controlled by the pristine characteristics of two gratings. We also investigate the transmission characteristics of phase-shifted LPFG by exposing the half of LPFG region to UV laser. The transmission characteristics strongly depend on the initial coupling strength of the LPFG.

손모양 인식기반의 경로교사와 장애물 인식이 가능한 자율보행 다족로봇 시스템

김민성,정우원,권배근,강동중,Kim, Min-Sung,Jeong, Woo-Won,Kwan, Bae-Guen,Kang, Dong-Joong 한국정보통신학회 2010 한국정보통신학회논문지 Vol.14 No.8

영상카메라와 무선통신 기능을 탑재한 손모양 및 장애물 인식이 가능한 다족 로봇을 독자적으로 설계 및 제작하고 제작한 로봇에 최적화된 보행패턴 알고리즘을 개발하여 적용하였다. 영상센서의 입력화상에 대해 하프변환 (Hough Transform)을 사용하여 물체의 외곽선을 추출하여 장애물을 인식하여 회피하는 실시간 자율보행이 가능한 알고리즘을 개발하였다. 로봇의 목표물 및 목적지 설정을 위하여 미리 학습시킨 피부색의 평균값과 입력영상의 확률거리(Mahalanobis Distance)를 산출하여 손 영역을 검출하고 손가락 개수에 따라 로봇의 명령 제어가 가능하도록 하였다. 장애물 및 손모양 인식에 따른 다족 자율 보행 로봇의 수행 실험 평균 결과 약 96%의 장애물 인식률과 94%의 손 모양 인식률을 보였다. In this paper, multi-legged robot was designed and produced using stable walking pattern algorithm. The robot had embedded camera and wireless communication function and it is possible to recognize both hand posture and obstacles. The algorithm decided moving paths, and recognized and avoided obstacles through Hough Transform using Edge Detection of inputed image from image sensor. The robot can be controlled by hand posture using Mahalanobis Distance and average value of skin's color pixel, which is previously learned in order to decide the destination. The developed system has shown obstacle detection rate of 96% and hand posture recognition rate of 94%.

pH 나노센서로의 응용을 위한 UV-가교 P4VP 박막에 고정한 금 나노입자의 특성

김민성,정연태,Kim, Min-Sung,Jeong, Yeon-Tae 한국전기전자재료학회 2008 전기전자재료학회논문지 Vol.21 No.11

In this report, we describe the use of gold nanoparticles (AuNPs) immobilized on pH. responsive, cross-linked poly(4-vinylpyridine) (P4VP) thin films, as a potential application for pH nanosensors. The methodology is based on the variation in surface plasmon resonance of immobilized AuNPs with changing the interparticle distances, caused by the swelling/deswelling of the pH responsive P4VP polymer films. The change in optical properties of the immobilized AuNPs in response to the pH of surrounding media was investigated by a simple yet powerful tool; UV-vis absorption spectroscopy. The swelling of the P4VP chains at pH 2 causes an increase in the interparticle distances of immobilized AUNPS ($\sim20nm$) and hence leads to a blue shift of 48 nm in their surface plasmon resonance band peak. On the other hand, when the surrounding media was altered from pH 2 to 10, a red shift of absorption maxima was observed. The changes were rapid, and the effect was reversible. This system could prove to be useful in fabricating nanosensors for detecting the pH or pH changes of surrounding aqueous medium.

스폰지 복제법을 이용한 Ag 코팅 BCP 지지체의 제조 및 평가

김민성,김영희,송호연,민영기,이병택,Kim, Min-Sung,Kim, Young-Hee,Song, Ho-Yeon,Min, Young-Ki,Lee, Byong-Taek 한국재료학회 2010 한국재료학회지 Vol.20 No.8

As a starting material, BCP (biphasic calcium phosphate) nano powder was synthesized by a hydrothermal microwave-assisted process. A highly porous BCP scaffold was fabricated by the sponge replica method using 60 ppi (pore per inch) of polyurethane sponge. The BCP scaffold had interconnected pores ranging from $100\;{\mu}m$ to $1000\;{\mu}m$, which were similar to natural cancellous bone. To realize the antibacterial property, a microwave-assisted nano Ag spot coating process was used. The morphology and distribution of nano Ag particles were different depending on the coating conditions, such as concentration of the $AgNO_3$ solution, microwave irradiation times, etc. With an increased microwave irradiation time, the amount of coated nano Ag particles increased. The surface of the BCP scaffold was totally covered with nano Ag particles homogeneously at 20 seconds of microwave irradiation time when 0.6 g of $AgNO_3$ was used. With an increased amount of $AgNO_3$ and irradiation time, the size of the coated particles increased. Antibacterial activities of the solution extracted from the Ag-coated BCP scaffold were examined against gram-negative (Escherichia coli) and gram-positive bacteria (Staphylococcus aureus). When 0.6 g of $AgNO_3$ was used for coating the Ag-coated scaffold, it showed higher antibacterial activities than that of the Ag-coated scaffold using 0.8 g of $AgNO_3$.

PMIC용 32bit eFuse OTP 설계

김민성,윤건수,장지혜,김려연,하판봉,김영희,Kim, Min-Sung,Yoon, Keon-Soo,Jang, Ji-Hye,Jin, Liyan,Ha, Pan-Bong,Kim, Young-Hee 한국정보통신학회 2011 한국정보통신학회논문지 Vol.15 No.10

본 논문에서는 Magnachip $0.18{\mu}m$ 공정을 이용하여 PMIC용 32bit eFuse OTP IP를 설계하였다. eFuse 링크 아래에 N-Well을 두어 프로그램시 eFuse 링크와 p-기판의 VSS가 단락되는 문제점을 해결하였다. 그리고 디코딩된 WERP (WL Enable for Read or Program) 신호가 eFuse OTP 메모리로 바로 입력되는 경우 듀얼 포트 eFuse OTP 메모리 셀의 RWL (Read Word-Line)과 WWL (Write Word-Line)을 선택적으로 활성화해 주는 WL 구동회로를 제안하였다. 또한 BL 프리차징 회로에서 delay chain을 제거하여 제어회로의 레이아웃 면적을 줄였다. 메모리 테스트 장비를 이용하여 제작된 94개의 샘플 die를 측정한 결과 5.5V의 프로그램 전압에서 100%의 수율을 얻었다. In this paper, we design a 32-bit eFuse OTP memory for PMICs using MagnaChip's $0.18{\mu}m$ process. We solve a problem of an electrical shortage between an eFuse link and the VSS of a p-substrate in programming by placing an n-well under the eFuse link. Also, we propose a WL driver circuit which activates the RWL (read word-line) or WWL (write word-line) of a dual-port eFuse OTP memory cell selectively when a decoded WERP (WL enable for read or program) signal is inputted to the eFuse OTP memory directly. Furthermore, we reduce the layout area of the control circuit by removing a delay chain in the BL precharging circuit. We'can obtain an yield of 100% at a program voltage of 5.5V on 94 manufactured sample dies when measured with memory tester equipment.

ZnO와 Al-doped ZnO 박막의 표면 형상과 전기·광학적 특성에 미치는 Wet Etching 시간의 영향

김민성,Kim, Min-Sung 한국전기전자재료학회 2013 전기전자재료학회논문지 Vol.26 No.3

We investigated the effect of etching time on the surface roughness, and electrical and optical properties of ZnO and 2 wt% Al-doped ZnO (AZO) films. The ZnO and AZO films were deposited on glass substrates by RF magnetron sputtering technique. The etching experiment was carried out using a solution of 5% HCl at room temperature. The surface roughness was characterized by Atomic Force Microscopy. The electrical property was measured by Hall measurement system and 4-point probe. The optical property was characterized by UV-vis spectroscopy. After the wet chemical etching, the surface textures were obtained on the surface of the ZnO and AZO films. With the increase of etching time, the surface roughness (RMS) of the films increased and the transmittance of the films was observed to decrease. For the AZO film, a low resistivity of $1.0{\times}10^{-3}\;{\Omega}{\cdot}cm$ was achieved even after the etching.

저잡음 · 고신뢰성 Differential Paired eFuse OTP 메모리 설계

김민성,김려연,학문초,하판봉,김영희,Kim, Min-Sung,Jin, Liyan,Hao, Wenchao,Ha, Pan-Bong,Kim, Young-Hee 한국정보통신학회 2013 한국정보통신학회논문지 Vol.17 No.10

본 논문에서는 power IC에서 파워가 ON되어있는 동안 입력 신호인 RD(Read) 신호 포트에 glitch와 같은 신호 잡음이 발생하더라도 파워-업(power-up)시 readout된 DOUT 데이터를 유지하면서 다시 읽기 모드로 재진입하지 못하도록 막아주는 IRD(Internal Read Data) 회로를 제안하였다. 그리고 pulsed WL(Word-Line) 구동방식을 사용하여 differential paird eFuse OTP 셀의 read 트랜지스터에 수 십 ${\mu}A$의 DC 전류가 흐르는 것을 방지하여 blowing 안된 eFuse 링크가 EM(Electro-Migration)에 의해 blowing되는 것을 막아주어 신뢰성을 확보하였다. 또한 program-verify-read 모드에서 프로그램된 eFuse 저항의 변동을 고려하여 가변 풀-업 부하(variable pull-up load)를 갖는 센싱 마진 테스트 기능을 수행하는 동시에 프로그램 데이터와 read 데이터를 비교하여 PFb(pass fail bar) 핀으로 비교 결과를 출력하는 회로를 설계하였다. $0.18{\mu}m$ 공정을 이용하여 설계된 8-비트 eFuse OTP IP의 레이아웃 면적은 $189.625{\mu}m{\times}138.850{\mu}m(=0.0263mm^2)$이다. In this paper, an IRD (internal read data) circuit preventing the reentry into the read mode while keeping the read-out DOUT datum at power-up even if noise such as glitches occurs at signal ports such as an input signal port RD (read) when a power IC is on, is proposed. Also, a pulsed WL (word line) driving method is used to prevent a DC current of several tens of micro amperes from flowing into the read transistor of a differential paired eFuse OTP cell. Thus, reliability is secured by preventing non-blown eFuse links from being blown by the EM (electro-migration). Furthermore, a compared output between a programmed datum and a read-out datum is outputted to the PFb (pass fail bar) pin while performing a sensing margin test with a variable pull-up load in consideration of resistance variation of a programmed eFuse in the program-verify-read mode. The layout size of the 8-bit eFuse OTP IP with a $0.18{\mu}m$ process is $189.625{\mu}m{\times}138.850{\mu}m(=0.0263mm^2)$.