http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
길도현,김상범,송혁수,유동근,이상훈,박민순,강준길,조광섭,조미령,황명근,김영욱,Gill, Doh-H.,Kim, Sang-B.,Song, Hyuk-S.,Yu, Dong-G.,Lee, Sang-H.,Pak, Min-Sun,Kang, June-Gill,Cho, Guang-Sup,Cho, Mee-R.,Hwang, Myung-G.,Kim, Young-Y. 한국진공학회 2006 Applied Science and Convergence Technology Vol.15 No.3
외부전극 형광램프의 구동에서 과도한 전력을 인가하면, 외부전극 부분의 유리관 표면에 작은 원형의 구멍(핀홀)이 발생하여 램프가 파손된다. 핀홀은 외부전극과 유리관을 유전층으로 하는 캐패시터의 절연파괴이며, 이러한 절연파괴력은 인가되는 전력에 비례한다. 유전상수가 K인 램프에 흐르는 전류가 작을 때, 핀홀이 발생하는 유리관의 절연파괴 전기장의 세기는 약 3K kV/mm,이다. 이러한 절연파괴 전기장의 세기는 램프에 흐르는 전류가 커질수록 작아진다. Application of power higher than the optimum operation value to an external electrode fluorescent lamps(EEFL) leads to the formation of small holes, called pinholes, which subsequently leads to lamp failure. The pinholes come from the insulating breakdown of the capacitor which is the dielectric layer between an external electrode and glass tube. The power of insulation breakdown is proportional to the electric power applied to the lamp. When a lamp current is low in the glass tube of dielectric constant K, the dielectric field strength of pinholes is about 3K kV/mm. The field strength of insulation breakdown decreases as the lamp current increases.
통계적 특징을 이용한 Shape Context 기반 고속 Shape 매칭 알고리즘
길도현,이시웅 한밭대학교 2010 한밭대학교 논문집 Vol.8 No.1
Shape descriptor로써의 Shape Context는 shape 간의 유사도를 측정하는데 있어 매우 좋은 성능 을 보이는 기법이다. 하지만, shape context에 기반한 매칭 방법은 각 shape의 샘플링된 nro의 점들이 갖 고 있는 shape context들에 대한 매칭 작업이 모두 수행되어야 하고, 데이터베이스의 크기가 커질수록 매 칭을 위한 계산량은 방대해진다. 본 논문에서는 shape context들의 통계적 특정을 이용한 고속 shape 매 칭 알고리즘을 제안하였다 이 방법은 한 shape에 대한 shape context를 평균, 분산 또는 평균 분산의 한 벡터로 표현함으로써 shape 전체의 특성을 반영하고, 매칭에 필요한 shape context의 개수를 감소시켜 계 산량을 줄이는 것이다 제안된 알고리즘은 몇 개의 대표 shape context를 추출하여 매칭하는 기존 고속 매칭 기법인 RSC 알고리즘의 매칭 횟수 대비 1/(l6n) 로 감소 (16-RSC의 경우)하는 반면, 매칭 정확도는 RSC 와 유사하거나 개선된 성능을 보인다.
LCD 백라이트용 외부전극 형광램프의 인버터 회로 해석
정종문,신명주,이미란,김가을,김정현,김상진,이민규,강미조,신상초,안상현,길도현,유동근,구제환,Jeong, Jong-Mun,Shin, Myeong-Ju,Lee, Mi-Ran,Kim, Ga-Eul,Kim, Jung-Hyun,Kim, Sang-Jin,Lee, Min-Kyu,Kang, Mi-Jo,Shin, Sang-Cho,Ahn, Sang-Hyun,Gill, Do 한국진공학회 2006 Applied Science and Convergence Technology Vol.15 No.6
외부전극 형광램프를 광원으로 하는 백라이트의 저항$(R_L)$과 전기용량(C), 그리고 인버터의 트랜스포머 인덕턴스(L)로 구성된 회로를 분석하였다. 램프의 저항과 전기용량은 램프에 흐르는 전류와 전압의 위상차 및 Q-V 그래프에서 결정된다. 32인치용 EEFL 램프 하나의 저항 값은 $66\;k\Omega$이고 전기용량은 21.61 pF이다. 20 개의 EEFL을 병렬 연결한 백라이트의 저항은 $3.3\;k\Omega$이고 전기용량은 402.1 pF이다. 램프 및 트랜스포머 회로에서 임피던스 매칭 주파수는 2 차 코일의 인덕턴스 $L_2$와 결합계수 k로 나타내며, $\omega_M=1/\sqrt{L_2C(1-k^2)}$ 이다. 램프 시스템의 전류와 전압은 임피던스 매칭 주파수에서 최대값을 갖는다. 이러한 해석 해의 결과는 실험 결과와 잘 일치한다. The circuit of the EEFL system and the inverter has been analyzed into the resistance RL, the capacitance C of the EEFL-backlight system, and the inductance of transformer in the inverter. The lamp resistance and capacitance are deter-mined from the phase difference is between the lamp current and voltage and from the Q-V diagram, respectively. The single Lamp of EEFL for 32' LCD-BLU has the resistance of $66\;k\Omega$ and the capacitance of 21.61 pF. The resistance, which is connected by parallel in the 20-EEFLS BLU, is $3.3\;k\Omega$ and the capacitance is 402.1 pF. The matching frequency in the operation of lamp system is noted as $\omega_M=1/\sqrt{L_2C(1-k^2)}$, where $L_2$ is the inductance of secondary coil and k is the coupling coefficient between primary and secondary coil. The lamp current and voltage has maximum value at the matching frequency in the LCD BLU system. The results of analytic solutions are in good agreement with the experimental results.
김영삼(Young Sam Kim),김영권(Young Guon Kim),오현주(Hyun Ju Oh),조대근(Dai Geun Joh),길도현(Doh Hyun Gill),김대일(Dae Il Kim),강준길(June Gill Kang),강승언(Seung Oun Kang),최은하(Eun Ha Choi),조광섭(Guangsup Cho) 한국진공학회(ASCT) 1999 Applied Science and Convergence Technology Vol.8 No.4(1)
표면전도 전자방출 표시장치의 표시면으로 흐르는 표시전류의 근원은 음극 표면에서 방출된 전자의 관성력에 의한 것임을 전자 운동 궤적의 계산을 통하여 확인하였다. 마이크로 이하의 전극 간격을 갖는 공면 전극구조에서 음극의 가장자리 면에서 전자의 터널링에 의하여 방출된 대부분의 전자는 동일면상의 양극 쪽으로 면전류가 흐르며, 약 10^(-3)의 비율로 표시면의 양극 쪽으로 표시전류가 흐른다. 이때의 표시전류는 표면의 양쪽 가장자리면 사이의 전기장의 굴곡에 의한 원심력에 의하여 표시면으로 방출되는 전자이다. It is confirmed that the cause of anode current in SEDs (surface conduction electron emission displays) is the inertial force of electron emitted from the cathode surface in the calculation of electron trajectory. In the fissure of sub-micron, most of electrons emitted from the area of the cathode edge flow into the coplanar anode, while some electrons are emitted into the display surface by the current ratio of 10^(-3). The later electrons are forced to fly into the display surface by the centrifugal force due to the curved electric field between top side surfaces near the fissure.
조광섭(Guangsup Cho),이대홍(Dae H. Lee),이주영(Joo Y. Lee),송혁수(Hyuck S. Song),길도현(Doh H. Gill),구제환(Je H. Koo),최은하(Eun H. Choi),김상범(Sang B. Kim),김봉수(Bong S. Kim),강준길(June G. Kang),조미령(Mee R. Cho),황명근(Myung G. H 한국진공학회(ASCT) 2005 Applied Science and Convergence Technology Vol.14 No.1
전극 양단에 안정 콘덴서(Ballast Contenser)를 부착한 냉음극 형광램프와 외관전극의 용량성 결합으로 동작되는 외부전극 형광램프의 전류-전압 방전특성을 조사하였다. 냉음극 형광램프의 전극 양단에 인가되는 전압과 전류의 특성은 전압의 증가로 암전류 영역과 타운젠트 점화방전을 거쳐서 음극 강하를 통한 전형적인 글로우 방전을 보여준다. 안정 콘덴서에 인가되는 전압을 포함한 전류-전압은 안정 콘덴서에 인가되는 전압이 상대적으로 크기 때문에 냉음극 강하가 나타나지 않고, 글로우 방전 영역에서 전압의 증가에 따라서 전류가 증가한다. 외부전극 자체가 캐패시터인 외부전극 형광램프에서의 전류-전압은 안정 콘덴서를 포함한 냉음극 형광램프와 동일한 특성을 보여준다. 따라서 외부전극 형광램프는 동작 전압에서 글로우 방전의 특성을 갖으며, 외부전극 자체가 안정 콘덴서의 기능을 한다. The characteristics of current and voltage in a basic discharge experiment are investigated for a cold cathode fluorescent lamp with ballast capacitors attached at both ends of lamp and for a capacitive coupled external electrode fluorescent lamp. In the current-voltage characteristics for a cold cathode fluorescent lamp except ballast capacitors, it is shown that the typical glow discharge with the cathode fall follows after the dark current and Townsend firing discharge. However, in the characteristics for a cold cathode fluorescent lamp including ballast capacitors, the current increases as the voltage increases in the glow discharge region without representing a cathode fall since the most voltage is loaded at two capacitors. The characteristics for the external electrode fluorescent lamp shows the same as that of the cold cathode fluorescent lamp in the respect of glow discharge characters, and the external electrode itself roles the ballast capacitor.