http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
능동소자의 접합 커패시턴스를 이용한 VCO 설계에 관한 연구
강석엽,박욱기,고민호,박효달,Kang, Suk-Youb,Park, Wook-Ki,Go, Min-Ho,Park, Hyo-Dal 한국항행학회 2004 韓國航行學會論文誌 Vol.8 No.1
본 논문에서는 경량화, 소형화 가격절감에 맞추어 전압 제어 발진기의 공진기 부분에 바랙터 다이오드를 사용하지 않고, 발진부에 사용된 트랜지스터의 베이스 단에 제어 전압을 인가하여 TR 내부 커패시턴스를 변화시키므로 하여 X/Ku 대역 민수용 RD에 사용 가능한 전압 제어 발진기를 설계 및 제작하였다. 시뮬레이션을 수행 한 결과 설계한 전압 제어 발진기는 4.25 V에서 4.80 V까지의 제어 전압에 의하여 약 110 MHz의 주파수 동조 범위를 보였으며, 11.46 GHz 동작 주파수에서 9.63 dBm의 출력 및 1 MHz의 옵셋 주파수에서 -107.2 dBc의 위상잡음 특성을 나타내어 상용 목적에 적합한 성능을 내었다. In this paper, keeping pace with light weight, pocket-size, lower-price, we design VCO(Voltage Controlled Oscillator) X/Ku band for using at public RD(Radar Detector) to apply to controlled voltage on base in transistor which used as a oscillator, without using varactor diode in part of VCO tuner. As a result of simulation, we conclude VCO could be have 110 MHz by controlled voltage 4.25 V to 4.80 V and show its output 9.63 dBm at operating frequency, 11.46 GHz, and its phase noise -107.2 dBc at 1 MHz offset frequency. So it turned out suitable performance for commercial use.
5.25GHz 대역의 무선 LAN을 위한 광대역 U-슬롯 Bow-Tie 마이크로스트립 안테나 설계 및 제작
강석엽,이원종,박효달 한국통신학회 2004 韓國通信學會論文誌 Vol.29 No.2A
In this paper, U-Shaped slot Bow-Tie antenna for 5.15㎓∼5.35㎓ is designed, fabricated, and measured. The prototype consist of U-Shaped slot. To obtain suitable bandwidth, the form layer is inserted between ground plane and substrate. Important parameters in the design are U-slot length, width, position, air-gap height, and feed point position. From these parameters optimized, a U-shaped slot Bow-Tie antenna is fabricated and measured. The measured results of the antenna are obtained as follows results. The resonant frequency of the Fabrication U-shaped slot Bow-Tie antenna is 5.28㎓, bandwidth for approximately 7.76%(VSWR<1.2) and the gain is 4∼7dBi. The experimental far-field patterns are stable across the pass band. The 3dB bandwidth in Elevation and Azimuth are 73.63$^{\circ}$and 65.08$^{\circ}$, respectively. 본 논문에서는 5.15-5.35GHz 대역의 무선 LAN용 U-슬롯 Bow-Tie 마이크로스트립 안테나에 관하여 연구하였다. Bow-Tie 패치에 U-슬롯을 갖도록 하였으며 접지면과 기판사이에 공기층을 삽입하여 VSWR<1.2 에서 적절한 대역을 얻고자 하였다. 설계시 주요 파라미터는 U-슬롯의 길이, 폭, 위치와 공기층의 두께 및 급전위치였으며 최적화된 파라미터를 가지고 실제 제작 및 측정하였다. 제작된 안테나의 측정결과로 공진주파수는 5.28GHz이고, VSWR<1.2에서 7.76%의 대역폭과 4∼7dBi의 이득을 얻었다. Elevation과 Azimuth에서 각각 73.63$^{\circ}$와 65.08$^{\circ}$로 나타났다.
양방향 RF 통신을 이용한 초소형 오토 샤클 설계 및 구현
강석엽(Suk-youb Kang),황인규(In-kyu Hwang) 한국통신학회 2007 韓國通信學會論文誌 Vol.32 No.10A
모든 공사 현장에서 철골 세우기 작업시 철골 보, 기둥(H 빔) 등의 이동을 위하여 크레인에 샤클을 부착하여 사용하고 있다. 이때 사용되는 샤클의 해체 작업은 높은 곳으로 올라가 수동으로 해야 하므로 안전사고의 위험성이 높고, 작업의 효율성이 떨어지며, 이는 시공비의 증가로 이어진다. 본 연구에서는 건설현장에서 실용적으로 사용할 수 있는 양방향 RF 통신을 이용한 초소형, 초경량, 저전력, 저가의 오토 샤클을 설계·구현하였으며, 기존 오토 샤클과는 다른 새로운 동작원리와 구조를 채택함으로서 우수한 원격 모니터링, 제어 기능을 갖출 수 있었다. 연구 결과는 여러가지 건설 장비의 원격 제어용으로 응용이 가능하며, 건설장비의 첨단화를 가속화 시킬 것으로 판단된다. In order to set up a steel frame at every construction site, it is necessary to attach a shackle to a crane to move steel frame beams and columns(H beams). The shackle used for this purpose must be removed manually from a higher place, which causes the risk of safety accidents to increase, work efficiency to decrease, and construction costs to rise. In this study, micro-mini, super lightweight, lower power consumptive, and cheaper auto-shackle with two-way RF communication, which can be used practically at construction site is designed and developed. The developed auto-shackle is able to have excellent remote monitoring and controlling functions, by adopting new operating principles and structures different from the existing one. The results of the study reveal that the auto-shackle can be applied for the purpose of remote controlling of various construction equipments and speed up the advancement of construction equipments.
저주파/고주파와 냉자극을 이용한 의료용 조합 자극기의 설계 및 구현
윤완오,강석엽,정진하,최상방,Yoon, Wan-Oh,Kang, Suk-Youb,Jung, Jin-Ha,Choi, Sang-Bang 대한의용생체공학회 2008 의공학회지 Vol.29 No.1
In this paper, the study was carried out to design and implement the medical compound stimulator based on the preexisting individual medical stimulators with Low frequency, High frequency and cooling stimulation. The proposed equipment is designed to compound all the functions including a cooling stimulation with a range of $0{\sim}20^{\circ}C$ and the verified low and high frequencies of 250Hz, 500Hz, 1KHz and 1MHz respectively from the previous clinical experiment with a consideration of its credibility and efficiency. Also, it was constructed by using a new technique, thermoelectricity semiconductor with a consideration of miniaturization and stability. In accordance with patients' treatment purpose, the hand piece of low frequency/cooling stimulation and High frequency/cooling stimulation were separately designed for convenience. The frequency, accuracy and other factors of implemented medical compound stimulator was satisfied according to its measurement. It was also tested by Korean Testing Laboratory (KTL) for its stability and efficacy and it confirmed that the medical compound stimulator is suitable for use as it fits in with the medical equipment standards.