http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
서현정 ( Hyun Jeong Seo ),강미란 ( Mee Ran Kang ),박정은 ( Jung Eun Park ),손동원 ( Dong Won Son ) 한국목재공학회 2016 목재공학 Vol.44 No.1
본 연구는 국내에서 주로 사용되는 수입 목재 수종의 화재 안전성 평가에 대한 기초 자료를 구축하기 위하여 연소 및 열적 특성을 분석하였다. 연소 특성은 KS F ISO 5660-1 규정에 의거한 콘 칼로리미터 시험 방법으로 열방출률, 총방출열량, 연소 가스 발생, 그리고 중량 감소를 분석하였다. 열적 안정성은 열중량 분석(Thermogravimetric analysis)을 통해 시료의 열분해 온도 및 시점을 확인하였다. 분석된 수종은 국내 유용 수입 수종으로 멀바우(Merbau), 멤페닝(Mempening), 가로가로(Garo Garo), 말라스(Malas), 그리고 딜레니아(Dillenia)로 총 5수종을 선정하여 실험을 실시하였다. 열방출률 값은 말라스 > 멤페닝 > 가로가로 > 멀바우 > 딜레니아 순으로 확인되었다. 총 방출열량을 분석한 결과, 멤페닝 > 말라스 > 가로가로 > 멀바우 > 딜레니아 순으로 측정되었다. 가스분석 결과에서는 딜레니아가 CO/CO2비율이 최대치로 0.034로 확인되었고, 멤페닝과 말라스가 0.020으로 최소치를 나타내었다. 중량감소율의 최솟값은 딜레니아가 74.79%로 나타났으며, 말라스가 83.52%로 CO와 CO2의 발생과 목재 연소의 거동과의 상관관계를 나타내었다. 수종별 열분해 온도는 멀바우 348.07℃, 멤페닝 367.57℃, 가로가로 350.59℃, 말라스 352.41℃, 딜레니아 364.33℃로 확인되었다. The purpose of this study is to analyze the combustion and thermal properties in order to establish baseline data for the fire safety evaluation of imported wood. The combustion properties such as heat release rate, total heat release, gas yield, and mass loss were analyzed by the method of cone calorimeter test according to KS F ISO 5660-1 and thermogravimetric analysis (TGA). Analyzed species are five kinds of species as Merbau, Mempening, Garo Garo, Malas, and Dillenia. The heat released rate values showed the highest value of Malas as 375.52 kW/m2, and Dillenia showed the lowest value as 133.30 kW/m2. The data values were confirmed in the following order: Malas > Mempening > Garo Garo > Merbau > Dillenia. In case of the total heat release, it was measured in the following order: Mempening > Malas > Garo Garo > Merbau > Dillenia. The gas analysis results were that Dillenia showed the highest value of 0.034. Also, Mempening and Malas showed the lowest at 0.020 in the CO/CO2. Min of mass reduction was shown as 74.79% Sargent cherry, on the other hand, Malas had a 83.52%. It showed a correlation between and of the CO and CO2 generation and combustion characteristics of wood. The thermal decomposition temperature of the wood in the TGA were as follow that Merbau 348.07℃, Mempening 367.57℃, Garo Garo 350.59℃, Malas 352.41℃, Dillenia 364.33℃. The aim of this study is to determine the combustion properties of imported wood according to ISO 5660-1. And, based on the results of this study, we would proceed with further research for improving the fire safety of wood for construction.
손동원 ( Dong Won Son ),강미란 ( Mee Ran Kang ),이동흡 ( Dong Heub Lee ),박상범 ( Sang Bum Park ) 한국목재공학회 2013 목재공학 Vol.41 No.6
목재사용량의 증가에 따라 목재의 화재안전성에 대한 요구가 높아지고 있다. 실내 사용 목재의 난연처리에 무기인계를 약제로 사용함으로써 환경에 대한 부담을 줄이면서 난연성능을 향상 시킬 수 있다. 수용성 약제를 가압 주입하여 목재 내 깊숙이 침투시키면 목재의 고유기능을 유지하면서 난연성능을 부여 할 수 있다. 난연제의 용탈을 억제하여 장기간 성능을 유지할 수 있는 장점도 있다. 저자들은 액상규산나트륨을 주약제로 하고, 붕산 및 인계 약제를 보조약제로 하여 목재 내로 약액을 주입하는 공정을 개발하였다. 이들 약제는 난연성능 외에 방부 및 방충성능을 지니는 약제가 포함되어 있어, 난연성능과 함께 목재 사용 시 노출될 수 있는 부후환경에서의 내후성능을 방미효력과 방부효력으로 평가하였다. This study evaluated the ability of white and brown rot fungi to becompose fire retardant-treated wood by measuring mass loss. Anti efficacy of FRT against sapstain and mold fungi was evaluated. Wood was treated with liquid sodium silicate and boric acid, ammonium borate, di-ammonium phosphate. Retardant treated wood was then subjected to fungal decay resistance tests performed according to KS standard method using a brown-rot fungus. Fomitopsis palustris and white rot fungus Trametes versicolor; Aspergillus niger, Penicillium funiculosum, Rhizopus nigricans, Aureobasidium pullulans, Tricoderma virede fungi were used anti-sapstain and mold test. Boron and phosphorus chemicals used in this study increased the resistance of fire retardant treated wood against both fungal attack. Anti mold and sapstain efficacy of the fire retardant treated wood was excellent but there were difference depend on mold. After the liquid sodium silicate treatment, the second chemical treatment process could lead chemical fixation into wood, which effects decay resistance.
딥러닝을 통한 콘크리트 강도에 대한 배합 방법 예측에 관한 연구
최주희 ( Choi¸ Ju-hee ),양현민 ( Yang¸ Hyun-min ),이한승 ( Lee¸ Han-seung ) 한국건축시공학회 2021 한국건축시공학회 학술발표대회 논문집 Vol.21 No.2
This study aims to build a deep learning model that can predict the value of concrete mixing properties according to a given concrete strength value. A model was created for a total of 1,291 concrete data, including 8 characteristics related to concrete mixing elements and environment, and the compressive strength of concrete. As the deep learning model, DNN-3L-256N, which showed the best performance on the prior study, was used. The average value for each characteristic of the data set was used as the initial input value. In results, in the case of ‘curing temperature’, which had a narrow range of values in the existing data set, showed the lowest error rate with less than 1% error based on MAE. The highest error rate with an error of 12 to 14% for fly and bfs.
손동원 ( Dong Won Son ),강미란 ( Mee Ran Kang ) 한국목재공학회 2015 목재공학 Vol.43 No.1
본 연구는 목재에 난연성능을 부여하기 위한 난연제 조성물을 제조하고 그 난연제를 처리한 목재의 난연성능을 평가함에 있다. 난연제 조성물은 단독 혹은 혼합하여 소나무에 처리한 후 열분해 특성을 분석하였다. 처리된 시료의 연소특성 분석에는 TGA와 콘칼로리미터를 사용하였다. 시험결과, 단독약제에 의한 TGA의 열적 거동은 목재에 처리 시 Char의 형성 및 연소 지연 등으로 표현되어 나타났으며 이러한 연소특성은 이후 약제의 혼합에 의한 조성물의 난연성능의 발현에 영향을 미쳤다. 혼합약제의 목재 처리후 콘칼로리미터에 의한 열특성 분석에서는 처리농도 및 처리량에 따라서 열방출률 및 총열방출량에 영향이 있었다. 난연제 조성물 중 FR1, FR2는 건축법 난연 3급을 만족하였다. The aim of this paper is to analyze combustion characteristics of treated woods by fire retardants which are prepared by several borate and phosphate compound solutions. The combustion characteristics for flame retardant treated wood were carried out using thermogravimetric analysis (TGA) to measure their combustion heat and flame retardant test using cone-calorimeter. The result of TGA and flame retardant test showed that single chemical solution affected the char forming and flame delay. The mixed retardants solutions was believed to be related to the efficacy and property of single chemical. The retention value and concentration of the retardants also affected the performance of fire retardant treated woods. The fire retardants FR1 and FR2 satisfied the requirement of The 3 Grade of Korean building codes.