초소형 기어 제조를 위한 초소성 재료의 미세압출

다국어 초록 (Multilingual Abstract)

Fine grained superplastic Zn-22%Al alloy was extruded using a laser machined micro-die to produce a micro-gear shaft. Extrusion process was conducted under a constant pressure at constant temperatures ranging from 503 to 563K. Laser machining was capable to machine a micro-die with close tolerances and adequate surface quality. The extrusion rate increased with extrusion load under constant extrusion temperature. The rate reached a steady state and became constant after a certain period. There was a small instantaneous stroke on application of the load and then a very brief primary stage which preceded steady-state flow. The micro-extrusion process was proven to produce a micro-gear shaft successfully using a fine grained superplastic Zn-22%Al alloy.

참고문헌 (Reference)

1 Saotome Y., "Superplastic Micro-forming of Microstructures" IEEE 343-348, 1994

2 Saotome Y., "Superplastic Extrusion of Microgear Shaft of 10 μm in Module" 6 : 126-129, 2000

3 Saotome Y., "Superplastic Backward Microextrusion of Microparts for Microelectro- mechanical systems" 119 : 307-311, 2001

4 Messner A., "Size Effect in the FE-simulation of Microforming Processes" 45 : 371-379, 1994

5 Engel U., "Microforming-from Basic Research to Its Realization" 125 : 35-44, 2002

6 Fujita F., "Microactuators and Micromachines" 86 (86): 1721-1732, 1998

7 Park J. K., "Micro-factory" 13 (13): 18-24, 2004

8 Ehrfeld W., "Highly Parallel Mass Fabrication and Assembly of Microdevices" 7 : 145-150, 2001

9 Mohamed F. A., "Factors Influencing Ductility in the Superplastic Zn-22 pct Al Eutectoid" 8A : 933-938, 1977

10 Lee N-K., "Development of Micro Metal Forming Manufacturing System" 383-388, 2005