하이브리드형 압전 변압기의 고주파 승압 초퍼를 이용한 적응제어기법 유도전동기 속도 센서리스 벡터제어에 관한 연구 = A Study on the Speed Sensorless Vector Control for Induction Motor Adaptive Control Method using a High Frequency Boost Chopper of Hybrid Type Piezoelectric Transformer

국문 초록 (Abstract)

본 논문에서는 최근, 압전 변압기 기술의 급속한 발전을 이용하므로 자계의 잡음이 없고, 크기가 소형화되며 고효율과 고 전력 밀도, 누설자속이 없어 노이즈 발생이 없고, 공진주파수만을 이용하므로 출력파형이 정현파에 가까워 고조파 잡음이 없는 점을 이용하여 전기적인 등가회로를 적용하여 DC-DC 컨버터를 구현 하였다. 유도전동기 회전자 속도 개념에 자속 기준 모델 적용 시스템(FMRAS)을 적용하였다. 유도전동기의 벡터제어는 회전자 속도 정의의 추정값을 이용하여 실행 할 수 있고, 부가된 변화되는 모델로 회전자 목표값 계산을 수행 할 수 있다. 이 시스템은 PWM 공간 전압기법과 DC-DC 컨버터를 이용하여 벡터전류제어와 속도제어를 위한 PI제어기로 구성되어 있다. 제어를 위한 실행과 높은 속도계산을 디지털 신호 원칩 마이크로프로세서에 의해 수행 되었고, 시뮬레이션과 실험을 통해서 다양한 제어 방법의 타당성을 제시 하였다.

다국어 초록 (Multilingual Abstract)

In this paper, recently, it is described to the piezoelectric transformer technology develops, because it was have to favorable characteristics such as electromagnetic-noise free, compact size, higher efficiency, and superior power density, flux linkage, noiseless, etc. its resonance frequency was used to output waveform of a sine wave. A rotor speed identification method of induction motor based on the theory of flux model reference adaptive system(FMRAS). The estimator execute the rotor speed identification so that the vector control of the induction motor may be achieved. The improved auxiliary variable of the model are introduced to perform accurate rotor speed estimation. The control system is composed of the PI controller for speed control and the current controller using space voltage vector PWM techniuqe and DC-DC converter. High speed calculation and processing for vector control is carried out by digital signal one chip microprocessor. Validity of the proposed control method is verified through simulation and experimental results.

참고문헌 (Reference)

1 O. Ohnishi, "piezoelectric ceramics transformer for power supply operating in thickness extensional vibration mode" E77-A (E77-A): 2098-, 2004

2 X.X. Wang, "Piezoelectric properties, density behavior and micro structural evolution of low temperature sintered PZT ceramics with sintering aids" 21 (21): 1367-, 2001

3 Onishi, Masaya, "Multi-function PWM inverter for solar power systems" 115 (115): 969-977, 2011

4 R. Zno, "Modified coffering behaviors between PMN-PNN-PZT piezoelectric ceramics and PZT-doped 70Ag-30Pb alloy metalization" 326 : 202-207, 2002

5 S. zhamg, "Low temperature sintering and properties of piezoelectric ceramics PSNT-Mn with LiBio2 addition" 129 (129): 131-, 2006

6 S. S Han, "Hybrid Fuzzy controller design for Ultra-low Speed`s speed control of Hydraulic System" 11 (11): 2352-2359, 2007

7 D. W. An, "Hybrid Fuzzy controller design about Indirect Vector Control System Induction Motor, Korean Institut of Electrical Engineers" (11) : 650-652, 2004

8 Yasuhiko, Yoshio, "Grid-connected Photovoltaic maximum Power point tracking control of the system" (753) : 124-, 2011

9 K,Nagata, "Evaluation of the reliability of piezoelectric ceramic transformers" 36 (36): 6103-, 2007

10 J. H.. Yoo, "Electrical Characteristics of the Counter Vibration Mode Piezoelectric Transformer with Ring/Dot Electrode Area Ratio" 39 (39): 2680-, 2000

11 J. H. Yoo, "Electrical Characteristics of high power Piezoelectric Transformer for 28W fluorescent lamp" 2884 : 2001

12 P. Verdelho, "Digtal Simulation and applications of the PWM Voltage Converter connected to the AC mains" 438 (438): 438-443, 2011

13 J. T. Boys, "Current forced single phase reversible rectifier" 136 (136): 205-211, 2009

14 I, Nagy, "Control Algorithm of A Three Voltage. Source Reversible Rectifier" (3) : 287-292, 2011