고성능 MISFET형 수소센서의 제작과 특성 = Fabrication of MISFET type hydrogen sensor for high Performance

다국어 초록 (Multilingual Abstract)

We fabricated a MISFET using Pd/NiCr gate for the detecting of hydrogen gas in the air and investigated its electrical characteristics. To improve stability and high concenntration sensitivity and remove the blister generated by the penetration of hydrogen atoms Pd/NiCr catalyst gate metal are used as dual gate. To reduce the gate drift voltage caused by the inflow of hydrogen, the gate insulators of sensing and reference FFET were constructed with double insulation layers of silicon dioxide and silicon nitride.
The hydrogen response of MISFET were amplified with the difference of gate voltages of both MISFET. To minimize the drift and the noise, we used a OP177 operational amplifier. The sensitivity of the Pd/NiCr gate MISFET was lower than that of Pd/Pt gate MISFET, but it showed good stability and ability to detect high concentration hydrogen up to 1000ppm.

참고문헌 (Reference)

1 "유중 용존 수소감지를 위한 Pd/Pt Gate MISFET 센서의 제조와 그 특성" 5 (5): 41-46, 1996

2 "Thin Metal Film - Oxide - Semiconductor Structures with Temperature-Dependent Sensitivity for Unsaturated hydroc- arbons" 12 : 255-261, 1987

3 "The Influence of Different Insulators of Palladium Gate Metal Insulator Semiconductor Hydrogen Sensors IEEE Trans. on Electron Devices" ed-31 : 508-510, 1984

4 "Stabilization of MISFET hydrogen Sensors" 9 : 353-361, 1986

5 "Performance of Gas- Sensitive Pd-Gate MOSFETs with SiO2 and Si3N4 Gate Insulators" 4 : 593-598, 1983

6 "Detection of Hydrogen from Gases Dissolved in Transformer Oil by" 749-95 751, 1995

7 "Blister Formation in Pd Gate MIS Hydrogen Sensors" edl-3 : 384-386, 1982

8 "Adsorption of Hydrogen On Pd" 99 : 320-340, 1980

9 "Absorption Isoterms of Hydrogen in the Phase of the Hydrogen- Palladium System" 69 : 3773-3781, 1965