질량 및 부피 증가없이 전지와 구조물기능을 복합재에 결합시키는 구조전지 연구가 광범위하게 진행되고 있다. 탄소섬유 및 유리섬유를 하중지지 및 음극, 분리막 용도로 사용하고, 하중전...
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
https://www.riss.kr/link?id=A102957245
2017
Korean
KCI등재,ESCI
학술저널
46-51(6쪽)
0
0
상세조회0
다운로드국문 초록 (Abstract)
질량 및 부피 증가없이 전지와 구조물기능을 복합재에 결합시키는 구조전지 연구가 광범위하게 진행되고 있다. 탄소섬유 및 유리섬유를 하중지지 및 음극, 분리막 용도로 사용하고, 하중전...
질량 및 부피 증가없이 전지와 구조물기능을 복합재에 결합시키는 구조전지 연구가 광범위하게 진행되고 있다. 탄소섬유 및 유리섬유를 하중지지 및 음극, 분리막 용도로 사용하고, 하중전달이 가능한 고체전해질을 모재로 쓰는 것이 현재 아이디어 이지만, 고체전해질이 두 성능을 충분히 만족시키지 못하는 수준이라 구조전지를 구현하지 못하고 있는 실정이다. 그래서, 본 연구는 유리섬유 분리막 및 액체전해질을 사용하여 하중지지 및 전지의 기능을 동시에 수행하는 실험을 구성하여 액체전해액을 사용한 구조전지의 가능성 및 전기적 물성 변화를 관찰하였다. 인장된 분리막은 안정성을 떨어트리는 영향을 미치는데, 이는 양극의 미세입자들이 늘어난 유리섬유의 틈새로 침투하는 것을 분리막이 막지 못하기 때문이라 예상하였고, 상용 분리막을 추가로 사용 하여 그 예상되는 원인을 확인해 보았다. 그리고, 이러한 구조전지 시스템을 구현하기 위해서는 유리섬유 특성의 연구와 전극과 분리막의 계면에 대한 연구가 필요하다.
다국어 초록 (Multilingual Abstract)
Structural battery has been researched extensively to combine the functions of the battery and structure without gravimetric or volumetric increments compared to their individual components. The main idea is to employ carbon fabric as the reinforcemen...
Structural battery has been researched extensively to combine the functions of the battery and structure without gravimetric or volumetric increments compared to their individual components. The main idea is to employ carbon fabric as the reinforcement and electrode, glass fabric as the separator, and solid-state electrolyte which can transfer load. However, state-of-the-art solid-state electrolytes do not have sufficient load carrying functionality and exhibiting appropriate ion conductivity simultaneously. Therefore, in this research, a system which has both battery and load carrying capabilities using glass fabric separator and liquid electrolyte was devised and tested to investigate the potential and feasibility of this structural battery system and observe electric properties. It was observed that elongating separator decreased electrical behavior stability. A possible cause of this phenomenon was the elongated glass fabric separator inadequately preventing the penetration of small particles of the cathode material into the anode. This problem was verified additionally by using a commercial separator. The characteristic of the glass fabric and the interface between the electrode and glass fabric needed to be further studied for the realization of such a load carrying structural battery system.
참고문헌 (Reference)
1 Peabody, C., "The Role of Mechanically Induced Separator Creep in Lithim-ion Battery Capacity Fade" 196 : 8147-8153, 2011
2 Jacques, E., "The Effect of Lithium-intercalation of the Mechanical Properties of Carbon Fibres" 68 : 725-733, 2014
3 Shirshova, N., "Structural Supercapacitor Electrolytes Based on Bicontinuous Ionic Liquid-epoxy Resin Systems" 1 : 15300-, 2013
4 Asp, L. E., "Structural Power Composite" 101 : 41-61, 2014
5 Cannarella, J., "Stress Evolution and Capacity Fade in Constrained Lithium-ion Pouch Cells" 245 : 745-751, 2014
6 Huang, X., "Separator Technologies for Lithium-ion Batteries" 15 : 649-662, 2011
7 Park, J. G., "Principles and Applications of Lithium Secondary Batteries" Hongrung Pub. Co. 2016
8 Kjell, M. H., "PAN-based Carbon fiber Negative Electrodes for Structural Lithium-ion Batteries" 158 (158): A1455-A1460, 2011
9 Thomas, J. P., "Multifunctional Structure-battery Composites for Marine Systems" 47 (47): 5-26, 2013
10 Bismarck, A., "Multifunctional Epoxy Resin foR Structural Supercapacitors" 2012
1 Peabody, C., "The Role of Mechanically Induced Separator Creep in Lithim-ion Battery Capacity Fade" 196 : 8147-8153, 2011
2 Jacques, E., "The Effect of Lithium-intercalation of the Mechanical Properties of Carbon Fibres" 68 : 725-733, 2014
3 Shirshova, N., "Structural Supercapacitor Electrolytes Based on Bicontinuous Ionic Liquid-epoxy Resin Systems" 1 : 15300-, 2013
4 Asp, L. E., "Structural Power Composite" 101 : 41-61, 2014
5 Cannarella, J., "Stress Evolution and Capacity Fade in Constrained Lithium-ion Pouch Cells" 245 : 745-751, 2014
6 Huang, X., "Separator Technologies for Lithium-ion Batteries" 15 : 649-662, 2011
7 Park, J. G., "Principles and Applications of Lithium Secondary Batteries" Hongrung Pub. Co. 2016
8 Kjell, M. H., "PAN-based Carbon fiber Negative Electrodes for Structural Lithium-ion Batteries" 158 (158): A1455-A1460, 2011
9 Thomas, J. P., "Multifunctional Structure-battery Composites for Marine Systems" 47 (47): 5-26, 2013
10 Bismarck, A., "Multifunctional Epoxy Resin foR Structural Supercapacitors" 2012
11 Thomas, J. P., "Mechanical Design and Performance of Composite Multifunctional Materials" 52 : 2155-2164, 2004
12 Gasco, F., "Manufacturability of Composite Laminates with Integrated Thin Film Li-ion Batteries" 48 (48): 899-910, 2014
13 Yoshio, M., "Lithium-ion Batteries:Science and Technologies" Springer 2009
14 Djian, D., "Lithium-ion Batteries with High Charge Rate Capacity : Influence of the Porous Separator" 172 : 416-421, 2007
15 Jacques, E., "Impact of Mechanical Loading on the Electrochemical Behavior of Carbon Fibers for Use in Energy Storage Composite Materials" 2011
16 Wienrich, M., "Impact of Ionic Liquid on the Mechanical Performance of Matrix Polymer for Fibre Reinforced Materials for Energy Storage" 2012
17 Jacuqes, E., "Expansion of Carbon Fibres Induced by Lithium Intercalation for Structural Electrode Applications" 59 : 246-254, 2013
18 Pereira, T., "Embedding Thin-film Lithium Energy Cells in Structural Composites" 68 : 1935-1941, 2008
19 Snyder, J. F., "Electrochemical and Mechanical Behavior in Mechanically Robust Solid Polymer Electrolytes for use in Multifunctional Structural Batteries" 19 : 3793-3801, 2007
20 Kwon, S. J., "Effect of Nanoparticles on Ionic Conductivity and Modulus in Epoxybased Multifunctional Structural Electrolytes Containing Ionic Liquid" 2016
21 "ASTM D4964"
22 Gibson, R. F., "A Review of Recent Research on Mechanics of Multifunctional Composite Materials and Structures" 92 : 2793-2810, 2010
23 Chen, J., "A Coupled Penetration-Tension Method for Evaluation the Reliability of Battery Separators" 3 (3): A41-A44, 2014
고방열 복합소재 개발을 위한 고열전도성 액정성 에폭시 수지의 개발
Inter-lamina Shear Strength of MWNT-reinforced Thin-Ply CFRP under LEO Space Environment
압축 응력 변화에 대한 압전 단결정의 물성 변화를 고려한 압전 복합재료 작동기의 작동 변위 예측
BGF/PLA 복합재료를 이용한 골절치료용 고정판의 체액 노출 조건에 따른 성능평가
학술지 이력
연월일 | 이력구분 | 이력상세 | 등재구분 |
---|---|---|---|
2028 | 평가예정 | 재인증평가 신청대상 (재인증) | |
2022-01-01 | 평가 | 등재학술지 유지 (재인증) | |
2019-01-01 | 평가 | 등재학술지 유지 (계속평가) | |
2016-01-01 | 평가 | 등재학술지 선정 (계속평가) | |
2015-12-01 | 평가 | 등재후보로 하락 (기타) | |
2013-02-01 | 학술지명변경 | 한글명 : 한국복합재료학회지 -> Composites Research외국어명 : JOURNAL OF THE KOREAN SOCIETY FOR COMPOSITE MATERIALS -> Composites Research | |
2011-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2009-01-01 | 평가 | 등재 1차 FAIL (등재유지) | |
2006-01-01 | 평가 | 등재학술지 선정 (등재후보2차) | |
2005-01-01 | 평가 | 등재후보 1차 PASS (등재후보1차) | |
2004-01-01 | 평가 | 등재후보학술지 유지 (등재후보1차) | |
2003-01-01 | 평가 | 등재후보학술지 선정 (신규평가) |
학술지 인용정보
기준연도 | WOS-KCI 통합IF(2년) | KCIF(2년) | KCIF(3년) |
---|---|---|---|
2016 | 0.34 | 0.34 | 0.33 |
KCIF(4년) | KCIF(5년) | 중심성지수(3년) | 즉시성지수 |
0.28 | 0.25 | 0.439 | 0.03 |