이 연구는 피겨스케이팅 주니어 선수 4명을 대상으로 더블루프 동작의 3차원 영상 분석하여 상지 및 하지 분절의 운동학적 변인을 분석하여 더블루프 동작의 과학적인 기초자료를 제시하여...
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
https://www.riss.kr/link?id=T13242651
용인: 단국대학교 대학원, 2013
학위논문(석사) -- 단국대학교 교육대학원 , 교육학과 체육교육전공 , 2013. 8
2013
한국어
796.912 판사항(22)
경기도
kinematical Analysis on Double Loop Techniques Of Junior Figure Skating
vi, 62장: 삽화; 30 cm.
단국대학교 학위논문은 저작권에 의해 보호받습니다.
지도교수 : 박광동
참고문헌 :56-59장.
0
상세조회0
다운로드국문 초록 (Abstract)
이 연구는 피겨스케이팅 주니어 선수 4명을 대상으로 더블루프 동작의 3차원 영상 분석하여 상지 및 하지 분절의 운동학적 변인을 분석하여 더블루프 동작의 과학적인 기초자료를 제시하여...
이 연구는 피겨스케이팅 주니어 선수 4명을 대상으로 더블루프 동작의 3차원 영상 분석하여 상지 및 하지 분절의 운동학적 변인을 분석하여 더블루프 동작의 과학적인 기초자료를 제시하여 주니어 피겨 스케이팅 선수들의 경기력 증대와 기술 향상을 위한 과학적인 자료제공을 하는데 목적이 있다.
첫째, 더블루프동작의 소요시간은 1국면에서 스케이팅의 활주속도를 줄이지 않고 하체 분절의 각운동량을 크게 확보 하여야 점프 동작 시 유리한 점프효과가 있는 것으로 나타났다. 또한 신체를 빠르게 굴곡시켜 탄성에너지를 축적시킴으로 지면에서 이지하여 체공시간을 길게 한 것으로 나타났으며, 최고 정점인 E3까지 비틀기 동작을 마무리하고, E4에서 오른쪽 하체관절을 굴곡시켜 충격량을 최소화시켜 안전하게 착지 하는 것이 바람직한 것으로 나타났다.
둘째, 신체중심 위치 변화는 전방으로 향하는 빠른 스케이팅을 통해 투사속도를 빠르게 하여 상지를 수직으로 세워 점프를 높이며, 상 방향으로 신체를 띄우는 동시에 빠르게 비틀기를 수행해야 하고, 신체중심이 좌᠂우 위치 변화를 작게 하며 수직높이를 상승시키는 것이 바람직한 것으로 나타났다. 수직 높이를 상승시켜야 수직축 형성에 효과적이며 비틀기 동작을 안전하고 유리하게 수행하는 것이 바람직한 것으로 나타났다. 또한 착지구간인 E4시점에서 신체중심 위치 변화를 최대한 낮게 하여 안전하게 착지하는 것이 바람직한 것으로 나타났다.
셋째, 신체중심 속도 변화는 좌᠂우 변화 속도를 최대한 줄여주며 전방향의 변화 속도와 점프 변화 속도를 높여 큰 점프를 하여야 효과적인 것으로 나타났다. 스케이팅의 속도를 그대로 이용하여 하체 관절을 굴곡시킴과 동시에 견관절을 신전하여 스윙을 만든 후 비틀기를 함으로써 각운동량을 증가 시켜 안정된 동작을 시행하는 것으로 나타났으며, 또한 착지 시 하체관절을 빠르게 굴곡 시켜 신체중심 위치가 낮아져 안정적으로 착지하는 것이 효과적인 것으로 나타났다.
넷째, 신체 분절의 각도변화는 E2에서 족관절, 슬관절, 고관절을 각도를 크게 굴곡함으로써 지면에 힘을 가한 것으로 보여지며, 전이된 운동량을 E2에서 신전시켜 수직방향으로 투사 시킨 것으로 나타났다. 족과절, 슬관절, 고관절의 굴곡으로 운동량을 극대화시켜 신전하여 수직축 형성을 이루는 동시에 견관절의 스윙을 통해 수직방향으로 투사 하는 것이 효과적인 것으로 나타났다. 착지 시에는 견관절을 신전시키며 비틀기의 회전 속도를 줄임과 동시에 족관절, 슬관절, 고관절을 빠르게 굴곡시켜 착지하는 것이 바람직한 것으로 나타났다.
다섯째, 신체 분절의 각속도 변화는 E1에서 족관절, 슬관절, 고관절의 굴곡하여 각운동량을 보존함으로써 E2에서 빠르게 신전해 고관절, 슬관절로 전이된 각운동량을 족관절의 탄성에너지로 바꿈으로 수직각도로 크게 수직 상승하는 것이 효과적인 것으로 나타났다. 또한 점프시 견관절을 빠르게 신전하며 스윙하여 점프 수행능력을 최대로 끌어 올리며 점프 수행능력을 증가시켜야 바람직한 것으로 나타났다. 이때 견관절을 회전방향으로 빠르게 굴곡시켜 수평면을 유지한 고관절과 함께 비틀기를 수행하는 것이 효과적이며, E3에서 고관절, 슬관절, 족관절을 빠르게 굴곡 시켜 충격량을 줄여 E4에서 안전하게 착지하고, 굴곡되어 있는 견괄절을 신전함으로써 회전을 제어해 운동에너지를 위치 에너지로 전환시켜야 효과적인 동작인 것으로 나타났다.
다국어 초록 (Multilingual Abstract)
The purpose of this study is to provide the scientific data that will increase the performance of junior figure skater and improve technology. The target of this study was four junior figure skating players and the ananysis of three-dimensional images...
The purpose of this study is to provide the scientific data that will increase the performance of junior figure skater and improve technology. The target of this study was four junior figure skating players and the ananysis of three-dimensional images of double-loop operation and the analysis of the kinematic variable for the upper and lower limbs segment will provide scientific basic information of double-loop operation.
First, the double-loop operation time in one phase is found to have a favorable effect of the jump without reducing the skating slide speed and with the large angular momentum of the lower part of the body. In addition, accumulating elastic energy by bending the body quickly make it endure not in the ground long time and it was desirable to finish the twist until the peak of the action E3 and to land safely by bending the right lower limb joints at E4 to minimize impulse.
Second, the changes of the center of body towards the rapid skating in the position of the front and the upper limb in the vertical by making projection speed rapid increase jump, and float body upward and twist must be performed rapidly and at the same time making the changes of left and right position of center of body small was desirable to perform favorably. In order to make vertical axis by rising vertical height, performing twist action safely and effectively was desirable. In addition, minimizing the change of the center of body in the landing area E4 was desirable.
Third, the changes in speed of the center of gravity reduced maximum the change speed on the left and right and the increase of the forward change speed and jump change speed was effective. The bending lower body joints to keep using the skating speed and at the same time, stretching shoulder joint and after swing, twist increased the angular momentum and performed safe action. In addition, the quick flexion of lower body joints in landing made the center of body low to safely land and that appeared to be effective.
Fourth, the change in the angle of the body segments in E2 by the flexion of ankle, knee, hip angle significantly added power to the ground and stretched the transferred momentum on E2 to project in the vertical direction. The flexion of ankle, knee, and hip maximized the momentum and achieve the formation of the vertical axis by stretch. At the same time, the vertical projection was effective by swing of shoulder joint. In landing, the stretch of shoulder joint and reducing the speed of rotation of twist with the quick flexion of ankle, knee, and hip showed that it is desirable to landing.
Fifth, changes in the angular velocity of the body segments in E1 preserved the angular momentum by the flexion of ankle, knee, and hip and in E2 stretched rapidly from hip to knee, the angular momentum was transferred to the elastic energy of ankle joint so that it appeared to be effective to rise vertically on a large scale. In addition, shoulder joint stretched rapidly and swing to perform a jump and it needed to increase the jump ability up to the maximum and that appeared desirable. The flexion of the shoulder to the direction of rotation was effective to perform twist with hip that keep the plan and in E3 the quick flexion of the hip, knee, ankle reduce the impulse to land safely on E4 and stretching the bent shoulder joint controlled the rotation to transfer kinetic energy into potential energy and that was found to be an effective action.
목차 (Table of Contents)