TS형 박강판 용접 구조물의 자동화설계를 위한 피로특성에 관한 연구

다국어 초록 (Multilingual Abstract)

Cold-rolled carbon steel sheets are commonly used in railroad car or commercial vehicles such as the automobile. These are mainly fabricated by spot welding which is a kind of electric resistance welding. But fatigue strength of spot welding joint is lower than that of base metal due to high stress concentration at nugget edge of the spot welded part. And fatigue strength of them is especially influenced by not only geometrical and mechanical factors but also welding conditions of the spot welded joint. So for fatigue design of gas welded joints such as TS-type joints, it is necessary to obtain design information on stress distribution at the weldment as well as fatigue strength of spot welded joints. And also, the influence of the geometrical parameters of spot welded joints on stress distribution and fatigue strength must be evaluated. And analysis approach for fatigue test using design of experiment are evaluated optimum factor in TS-type welded joint and geometrical parameters of materials. Using these results, that factors applied to fundamental information for automation of fatigue design.

참고문헌 (Reference)

1 백승엽, "실험계획법을 이용한 STS301L 이음재의 GMA 용접 자동화에 관한 연구" 대한용접접합학회 28 (28): 49-54, 2010

2 Taguchi, G, "Systems of Experimental Design" Kraus International Publications Inc 103-164, 1987

3 Del, E. J, "Resistance Welding Manual"

4 Richard, F, "Performance Welding Handbook"

5 Bae, D. H, "Fracture Mechanical Fatigue Strength Evaluation of A Strength Spot Welded Lap Joint Subject to Tensile Shear Load" 13 (13): 42-50, 1990

6 Kang, J. B, "Fatigue Strength of the TS-Type Spot-Welded Lap Joint of STS301L" Sungkyunkwan University 2003

7 Lee, Y. B, "Fatigue Life Prediction of Spot Welds in SPCC" 137-142, 1997