형상적응형 냉각회로를 구비한 사출금형 및 히트 싱크를 가지는 절삭공구 (혹은 냉각 장치) 등과 같은 많은 응용 분야에서 기능성 경사 복합재(FGM)를 사용하여 필요한 강성을 약화시키지 않...
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
https://www.riss.kr/link?id=A100082235
2014
Korean
KCI등재,SCOPUS,ESCI
학술저널
953-958(6쪽)
1
0
상세조회0
다운로드국문 초록 (Abstract)
형상적응형 냉각회로를 구비한 사출금형 및 히트 싱크를 가지는 절삭공구 (혹은 냉각 장치) 등과 같은 많은 응용 분야에서 기능성 경사 복합재(FGM)를 사용하여 필요한 강성을 약화시키지 않...
형상적응형 냉각회로를 구비한 사출금형 및 히트 싱크를 가지는 절삭공구 (혹은 냉각 장치) 등과 같은 많은 응용 분야에서 기능성 경사 복합재(FGM)를 사용하여 필요한 강성을 약화시키지 않으면서 열전도 특성을 향상 시킬 수 있을 것으로 기대된다. 본 논문에서는 M2 공구강과 Cu 간의 FGM 히트 싱크를 가지는 절삭 공구 제작을 위한 기초연구로, M2 와 Cu 를 각각 100:0, 80:20, 60:40, 40:60, 20:80, 0:100 wt% 비율로 사전에 혼합한 금속분말을 분말야금법으로 가압성형 및 소결 제작 하였다. 각 시편의 단면을 광학현미경으로 관찰하여 소결 상태를 분석하였으며, 열전도도, 비열 및 열팽창계수 등 열전달 관련 물성을 측정하고 분석하였다.
다국어 초록 (Multilingual Abstract)
The use of functionally graded materials (FGMs) may enhance thermal conductivity without reducing the desired strength in many applications such as injection molds embedding conformal cooling channels and cutting tools with heat sinks (or cooling devi...
The use of functionally graded materials (FGMs) may enhance thermal conductivity without reducing the desired strength in many applications such as injection molds embedding conformal cooling channels and cutting tools with heat sinks (or cooling devices). As a fundamental study for cutting tools having FGM heat sinks between M2 tool steel and Cu, six FGM specimens (M2 and Cu powders were premixed such that the relative compositions of M2 and Cu were 100:0, 80:20, 60:40, 40:60, 20:80, and 0:100 wt%) were fabricated by powder metallurgy in this study. The cross sections of these specimens were observed by optical microscopy, and then the material properties (such as thermal conductivity, specific heat, and coefficient of thermal expansion) related to heat transfer were measured and analyzed.
목차 (Table of Contents)
참고문헌 (Reference)
1 안동규, "마우스 사출성형금형의 냉각 특성 향상을 위한 열전도성 금형 설계" 대한기계학회 33 (33): 201-209, 2009
2 정종설, "레이저 적층조형을 이용한 P21 툴 스틸과 Cu 간 기능성 경사 복합재의 제작" 대한기계학회 37 (37): 61-66, 2013
3 신기훈, "기능성 경사 복합재를 이용한 사출금형의 냉각회로 모델링" 대한기계학회 35 (35): 1647-1653, 2011
4 "www.insstek.co.kr"
5 Beal, V. E., "The Effect of Scanning Strategy on Laser Fusion of Functionally Graded H13/Cu Materials" 30 : 844-852, 2006
6 Ahn, D. G., "Study on the Manufacture of a Thermal Management Mould with Three Different Materials Using a Direct Metal Tooling Rapid Tooling Process" 224 (224): 385-402, 2010
7 Kieback, B., "Processing Techniques for Functionally Graded Materials" 362 : 81-105, 2003
8 Nemat-Alla, M. M, "Powder Metallurgical Fabrication and Microstructural Investigations of Aluminum/Steel Functionally Graded Material" 2 (2): 1708-1718, 2011
9 Cho, J. R., "Optimum Material Composition Design for Thermal Stress Reduction in FGM Lathe Bit" 37 (37): 1568-1577, 2006
10 Beal, V. E., "Optimisation of Processing Parameters in Laser Fused H13/Cu Materials Using Response Surface Method(RSM)" 174 : 145-154, 2006
1 안동규, "마우스 사출성형금형의 냉각 특성 향상을 위한 열전도성 금형 설계" 대한기계학회 33 (33): 201-209, 2009
2 정종설, "레이저 적층조형을 이용한 P21 툴 스틸과 Cu 간 기능성 경사 복합재의 제작" 대한기계학회 37 (37): 61-66, 2013
3 신기훈, "기능성 경사 복합재를 이용한 사출금형의 냉각회로 모델링" 대한기계학회 35 (35): 1647-1653, 2011
4 "www.insstek.co.kr"
5 Beal, V. E., "The Effect of Scanning Strategy on Laser Fusion of Functionally Graded H13/Cu Materials" 30 : 844-852, 2006
6 Ahn, D. G., "Study on the Manufacture of a Thermal Management Mould with Three Different Materials Using a Direct Metal Tooling Rapid Tooling Process" 224 (224): 385-402, 2010
7 Kieback, B., "Processing Techniques for Functionally Graded Materials" 362 : 81-105, 2003
8 Nemat-Alla, M. M, "Powder Metallurgical Fabrication and Microstructural Investigations of Aluminum/Steel Functionally Graded Material" 2 (2): 1708-1718, 2011
9 Cho, J. R., "Optimum Material Composition Design for Thermal Stress Reduction in FGM Lathe Bit" 37 (37): 1568-1577, 2006
10 Beal, V. E., "Optimisation of Processing Parameters in Laser Fused H13/Cu Materials Using Response Surface Method(RSM)" 174 : 145-154, 2006
11 Tang, C., "Optimal Cooling System Design for Multi-Cavity Injection Moulding" 26 (26): 229-251, 1997
12 Degarmo, E. P, "Materials and Processes in Manufacturing" John Wiley & Sons 2003
13 Cho, J. R., "High Strength FGM Cutting Tools: Finite Element Analysis on Thermoelastic Characteristics" 130-131 : 351-356, 2002
14 Ghosh, A., "Functionally Graded Materials: Manufacture, Properties, and Applications" 76 : 76-, 1997
15 Duran, A., "Finite Element Analysis of Bending Occurring While Cutting with High Speed Steel Lathe Cutting Tools" 26 : 549-554, 2005
16 Shin, K. H, "A Method for the Design and Fabrication of Heterogeneous Objects" 24 (24): 339-353, 2003
17 Li. C. L., "A Feature-Based Approach to Injection Mould Cooling System Design" 33 : 1073-1090, 2001
SWCH18A 와 SUS XM7 을 적용한 초소형 나사제작 및 물성분석에 관한 연구
회전속도에 따른 동역학적 변화를 고려한 반경방향 능동 자기베어링 시스템의 제어기 설계 및 검증
계장화 압입시험의 하중-변위 곡선에 미치는 선단 형상 및 푸아송비의 영향
학술지 이력
연월일 | 이력구분 | 이력상세 | 등재구분 |
---|---|---|---|
2023 | 평가예정 | 해외DB학술지평가 신청대상 (해외등재 학술지 평가) | |
2020-01-01 | 평가 | 등재학술지 유지 (해외등재 학술지 평가) | |
2010-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2008-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2006-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2004-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2001-01-01 | 평가 | 등재학술지 선정 (등재후보2차) | |
1998-07-01 | 평가 | 등재후보학술지 선정 (신규평가) |
학술지 인용정보
기준연도 | WOS-KCI 통합IF(2년) | KCIF(2년) | KCIF(3년) |
---|---|---|---|
2016 | 0.27 | 0.27 | 0.25 |
KCIF(4년) | KCIF(5년) | 중심성지수(3년) | 즉시성지수 |
0.24 | 0.23 | 0.506 | 0.06 |