Pilot Plant를 이용한 600 MPa급 내진용 철근들의 제조, 미세조직과 기계적 특성 비교 = Microstructure and Mechanical Properties of 600 MPa-Grade Seismic Resistant Reinforced Steel Bars Fabricated by a Pilot Plant

다국어 초록 (Multilingual Abstract)

This study deals with the microstructure and tensile properties of 600 MPa-grade seismic reinforced steel bars fabricated by a pilot plant. The steel bar specimens are composed of a fully ferrite-pearlite structure because they were air-cooled after hot-rolling. The volume fraction and interlamellar spacing of the pearlite and the ferrite grain size decrease from the center region to the surface region because the surface region is more rapidly cooled than the center region. The A steel bar specimenwith a relatively high carbon content generally has a higher pearlite volume fraction and interlamellar spacing of pearlite and a finer ferrite grain size because increasing the carbon content promotes the formation of pearlite. As a result, the A steel bar specimen has a higher hardness than the B steel bar in all the regions. The hardness shows a tendency to decrease from the center region to the surface region due to the decreased pearlite volume fraction. On the other hand, the tensile-to-yield strength ratio and the tensile strength of the A steel bar specimen are higher than those of the B steel bar with a relatively low carbon content because a higher pearlite volume fraction enhances work hardening. In addition, the B steel bar specimen has higher uniform and total elongations because a lower pearlite volume fraction facilitates plastic deformation caused by dislocation slip.

참고문헌 (Reference)

1 A. R. Marder, 7 : 365-, 1976

2 N. Kamikawa, 83 : 383-, 2015

3 S. Y. Lee, 22 : 28-, 2010

4 J. Nikolaou, 18 : 243-, 2004

5 P. Simon, 61 : 53-, 1984

6 J. H. Shim, 62 : 67-, 2018

7 K. Han, 190 : 207-, 1995

8 L. Wang, 24 : 321-, 2017

9 R. A. Gonzaga, 567 : 1-, 2013

10 S. W. Seo, 31 : 487-, 2015

11 K. B. Kang, 36 : 1303-, 1997

12 S. S. Hansen, 11 : 387-, 1980

13 Z. B. Xu, 24 : 1085-, 2017

14 B. Hwnag, 527 : 4341-, 2010

15 황병철, "내진용 고강도 철근의 제조와 기술 개발 동향" 대한금속·재료학회 54 (54): 862-874, 2016

16 Korean Agency for Technology and Standards, "Steel Bars for Concrete Reinforcement, KS D3504"

17 American Society for Testing and Materials, "Standard Test Methods for Determining Average Grain Size, ASTM E112"

18 이상인, "API X80 라인파이프강의 미세조직적 인자와 항복비 및 균일 연신율의 상관관계" 대한금속·재료학회 56 (56): 413-422, 2018