역V형 가새골조의 반응수정계수

국문 초록 (Abstract)

철골구조에서 지진력 저항시스템으로 많이 사용되고 있는 가새골조시스템은 중심가새골조(Concentrically Braced Frames, CBF)와 편심가새골조(Eccentrically Braced Frames, EBF)로 구분하여 KBC2009 건축구조기준에서는 서로 다른 반응수정계수를 적용하여 설계하도록 되어있다. 현행 내진설계기준에서 편심가새골조에 대하여 링크 타단 접합부의 종류에 따라 모멘트 저항접합일 경우 반응수정계수는 R=8, 비모멘트 저항접합일 경우 반응수정계수 R=7로 적용하여 설계하도록 규정하고 있을 뿐 편심길이의 영향을 고려하지 않고 있다. 본 연구에서는 편심가새골조 중에서 역V형가새골조를 대상으로 비탄성 거동을 파악한 다음 편심길이에 따른 반응수정계수를 산정하여 내진설계 기준에서 제시한 값과 비교한 결과 편심가새골조에 대하여 동일한 반응수정계수를 적용하는 것은 적절하지 않음을 확인하였다.

다국어 초록 (Multilingual Abstract)

In this study of Eccentric Braced Frames have identified the following target eccentricity on the length of the inelastic behavior of the reaction by calculating the correction factor by comparing it to the value suggested by the earthquake provided material for the rational design aims to There are. As a variable-length V-braced frame analysis model stations were set up. Eccentricity faults in the model according to the length stiffness ratio, the maximum amount of energy dissipation were analyzed base shear and multi-layered model of the reaction from the eccentricity correction factor calculated on the length of the building standards proposed by KBC 2009 in response eccentricity correction factor calculated from The length varies. does not have the same response modification factor was confirmed.

참고문헌 (Reference)

1 김진구, "역V형 특수가새골조의 반응수정계수" 한국지진공학회 8 (8): 29-37, 2004

2 김남훈, "역V형 철골 가새골조의 비탄성거동 및 내진성능향상 방안에 관한 연구" 한국강구조학회 15 (15): 571-578, 2003

3 김진구, "역V형 보통가새골조의 반응수정계수" 한국지진공학회 8 (8): 53-61, 2004

4 ATC, "Tentative provisions for the development of seismic regulations for buildings"

5 Earthquake Engineering Society of Korea, "Study on the Seismic Design Regulations (II)" 1997

6 AlexH. Barbat, "Seismic damage evaluation in urban areas using the capacity spectrum"

7 The Korean Structural Engineers Association, "Seismic Design of Steel Buildings per KBC 2009" 2010

8 Michel Bruneau, "Ductile Design of Steel Structures" McGraw-Hill Book Company 1998

9 Architectural Institute of Korea, "Design Application with Limit State Design Method for Structural Steel Building" 2002

10 Black, C., "Component testing, stability analysis and characterization of buckling restrained unbonded braces" Pacific Earthquake Engineering Research Center, University of California at Berkeley 2002

11 ErolKalkan, "Assessment of current nonlinear static procedures for seismic evaluation of buildings" 29 (29): 305-316, 2007

12 Kim Sang Mo, "A Study on the Strength Evaluation of the K type Braced Steel Frame" 10 (10): 1990