해상용 가스터빈의 스플리터 소음기 성능에 대한 실험적 연구

다국어 초록 (Multilingual Abstract)

Based on ISO 7235, an experimental setup to measure the acoustic performance of splitter type dissipative silencers was fabricated. The length of each duct, sound source, microphone locations, modal filter, and anechoic termination were considered in the design of this setup. The modal filter is a particularly important factor because it affects the limit of measurement. The effects of number of splitters, absorptive material density, perforate plate, and media on the noise reduction of the sample silencers were experimentally investigated. The experimental results show that the insertion loss of a silencer with media, high perforate opening, and higher number of splitters increases especially at higher frequencies.

참고문헌 (Reference)

1 이종화, "음향해석을 이용한 산업용 플랜트 배출 소음기의 설계 개선" 한국정밀공학회 23 (23): 122-128, 2006

2 김봉기, "선박용 소음기 성능 시험 및 평가" 한국소음진동공학회 18 (18): 1237-1242, 2008

3 Kirby, R., "Validating Insertion Loss Predictions for HAVC Silencers" 1031-1038, 2009

4 Kim, C. Y., "The Research for Performance Improvement of Splitter Type Sound Attenuator" 642-643, 2010

5 Kirby, R., "The Influence of Baffle Fairings on the Acoustic Performance of Rectangular Splitter Silencers" 118 (118): 2302-2312, 2005

6 Kirby, R., "On the Acoustic Performance of Rectangular Splitter Silencers in the Presence of Mean Flow" 333 (333): 6295-6311, 2014

7 Ver, I. L., "Noise and Vibration Control Engineering" John Wiley & Sons, Inc 2006

8 "ISO 7235, Acoustics- Laboratory Measurement Procedures for Ducted Silencers and Air-terminal Units -Insertions Loss, Flow Noise and Total Pressure Loss"

9 Baek, S. H, "Design and Measurement of Dissipative Silencers for Noise Reduction of Large Maritime Gas Turbine Engines" 367-371, 2014

10 Jeon, S. H., "Acoustic Performance Analysis of a Splitter Silencer" 332-333, 2008