마이크로다공성 발열체 표면에서의 액체분무 냉각성능 특성 = Characteristics on Spray Cooling Performanceon the Micro-Porous Coated Surfaces

다국어 초록 (Multilingual Abstract)

Experiments on evaporative spray cooling on the square plate heaters with plain or micro-porous coated surfaces were performed in this study. Micro-porous coated surfaces were made by using DOM[Diamond particle, Omegabond 101, Methyl-Ethyl-Keton] method. In case of purely air-jet cooling, the micro-porous coating doesn't affect the cooling capacity. In spray cooling three different flow patterns(complete wetting, evaporative wetting, dryout) are observed on both plain and micro-porous coated surfaces. The effects of various operating conditions, such as water flow rate, particle size, and coating thickness were investigated on the micro-porous coated surfaces. It is found that the level of surface wetting is an important factor to determine the performance of spray cooling. It depends on the balance between absorbed liquid amount by capillary force over porosity and the evaporative amount. The micro- porous coated surface has largest cooling capacity, especially in the evaporative wetting zone. It is found that the effects of liquid flow rate and coating thickness are significant in evaporative wetting zone, but are not in complete wetting and dryout zones.

참고문헌 (Reference)

1 "Thermal management of microeletronics in the 21st century" 1997

2 "The evolution of enhanced surface geometries for nucleate boiling" 2 (2): 46-69, 1981

3 "Predictable modeling of heat transfer coefficient between spraying water and a hot surface above the leidenfrost temperature" 37 (37): 492-497, 1997

4 "Predictable modeling of heat transfer coefficient between spraying water and a hot surface above the leidenfrost temperature" 37 (37): 492-497, 1997

5 "Mechanisms of film boiling heat transfer of normally impacting sprays International Journal of Heat and Mass Transfer" 30 : 311-318, 1987

6 "Liquid spray cooling of a heated surface International Journal of Heat and Mass Transfer" 24 : 261-271, 1981

7 "Evaporative spray cooling of plain and microporous coated surfaces" 47 : 3307-3315, 2004

8 "Effects of superheat and roughness on the boiling coefficients" 6 (6): 83-91, 1960

9 "Determination of the local quench curve for spray-cooled metallic surfaces Journal of Heat Treating" 7 (7): 107-121, 1989

10 "Describing uncertainties in single-sample experiments" 75 (75): 3-12, 1953

11 "Boiling heat transfer phenomena from micro-porous and porous surfaces in saturated FC-72" 40 (40): 4437-4447, 1997

12 "An experimental comparison of liquid jet array and spray impingement cooling in the non-boiling regime" 18 : 1-10, 1998

13 "A painting technique to enhance pool boiling heat transfer FC-72" 117 (117): 387-393, 1995