철근콘크리트부재의 최소 및 최대 전단철근비

다국어 초록 (Multilingual Abstract)

Current codes of practice have specified the minimum and maximum shear reinforcement ratio to prevent the brittle shear failure of reinforced concrete members. These limits on shear reinforcement, however, are significantly different, and cannot consider the effect of longitudinal reinforcement ratio and shear span ratio on the shear reinforcement limits. Thus, this study proposed the minimum and maximum shear reinforcement ratio considering these influencing factors, and compared to test data from previous studies and other approaches. The analysis results imply that the proposed limits on shear reinforcement are very rational and proper for reinforced concrete members having various concrete compressive strengths and longitudinal reinforcement ratios.

목차 (Table of Contents)

• Abstract
• 1. 서론
• 2. 최소전단철근비
• 3. 최대전단철근비
• 4. 결론
• 참고문헌

참고문헌 (Reference)

1 정영수, "콘크리트구조설계기준 해설" 한국콘크리트학회 328-, 2007

2 이정윤, "철근콘크리트 부재의 최소전단보강근비의 평가" 한국콘크리트학회 16 (16): 43-53, 2004

3 황현복, "철근콘크리트 보의 최대 전단철근비에 대한 평가" 한국콘크리트학회 21 (21): 719-727, 2009

4 김욱연, "전단경간비가 다른 철근콘크리트 보의 최소전단철근비 예측에 관한 실험적 연구" 15 (15): 890-895, 2003

5 Kuchma, D. A, "Stress Limits and Minimum Reinforcement Requirements in Shear Design Provisions" 3 (3): 317-325, 2001

6 Architectural Institute of Japan, "Standard for Structural Calculation of Reinforced Concrete Structures" Architectural Institute of Japan 412-, 1999

7 Architectural Institute of Japan, "Standard for Structural Calculation of Reinforced Concrete Structures" Architectural Institute of Japan 654-, 1991

8 Rahal, K. N., "Shear Strength of Reinforced Concrete: Part 1-Membrane Elements Subjected to Pure Shear" 97 (97): 86-94, 2000

9 Zararis, P. D., "Shear Strength and Minimum Shear Reinforcement of Reinforced Concrete Slender Beams" 100 (100): 203-214, 2010

10 Zsutty, T. C., "Shear Strength Prediction for Separate Categories of Simple Beam Tests" 65 (65): 138-143, 1971

11 Collins, M. P, "Prestressed Concrete Structures" Prentice Hall Inc 766-, 1991

12 Yoon, Y. S., "Minimum and High-Strength Concrete Beams" 93 (93): 576-584, 1996

13 Rahal, K. N., "Minimum Transverse Reinforcement in 65 MPa Concrete Beams" 101 (101): 872-878, 2004

14 Johnson, M. K., "Minimum Shear Reinforcement in Beams with Higher Strength Concrete" 86 (86): 376-382, 1989

15 Lee, J. Y, "Maximum Shear Reinforcement of Reinforced Concrete Beams" 107 (107): 580-588, 2010

16 Ozcebe, G., "Evaluation of Minimum Shear Reinforcement Requirements for Higher Strength Concrete" 96 (96): 361-369, 1999

17 Comete European de Normalisation (CEN), "Eurocode 2: Design of Concrete Structures. Part 1-General Rules and Rules for Buildings"

18 Lee, J. Y, "Effect of Longitudinal Tensile Reinforcement Ratio and Shear Span-Depth on Minimum Shear Reinforcement in Beams" 105 (105): 134-144, 2008

19 Angelakos, D., "Effect of Concrete Strength and Minimum Stirrups on Shear Strength of Large Members" 98 (98): 290-300, 2001

20 Bentz, E. C, "Development of the 2004 Canadian Standards Association(CSA) A23.3 shear provisions for reinforced concrete" 33 (33): 521-534, 2006

21 CSA Committee A23.3-04, "Design of Concrete Structures for Buildings(CAV3-A23.3-04)" 232-, 2004

22 Comite Euro-International du Beton, "CEB-FIP MODEL CODE 1990" Thomas Telford 437-, 1990

23 ACI Committee 318, "Building Code Requirements for Reinforced Concrete and Commentary" American Concrete Institute 465-, 2008

24 Zsutty, T. C., "Beam Shear Strength prediction by Analysis of Existing Data" 65 (65): 943-951, 1968

25 American Association of State Highway and Transportation Officials, "AASHTO LRFD Bridge Design Specifications, third edition" AASHTO 1450-, 2004