김해지역 5인 미만 제조업 사업장의 작업환경실태 = A Study on the Status of Work Environment in the Manufacturing with Less Than Five Workers in Gimhae Area

다국어 초록 (Multilingual Abstract)

For the purpose of preparing the fundamental data on working environment of small scale manufacturing industries and preventing the occupational diseases of workers in these industries, authors surveyed the status of working environment to several chemical substances and physical agents by types of industry and types of process in the small scale manufacturing industries with less than five workers in Gimhae including 235 workplaces, 14 types of industry and 25 types of process from January 2002 to December 2004. This measurement method was work environment measurement method (established in Ministry of Labor, Korea), analytical methods (2nd Ed.) of Occupational Safety and Health Administration (OSHA) and manual of analytical methods (4th Ed.) of National Institute for Occupational Safety and Health (NIOSH) and collected data was analyzed by using SPSS 10.0 for windows, the results were as follows: 1. Noise generated in 14 types of industry and 22 types of process. an actual level of mean exposure (90.7 dB(A)) exceeded threshold limit values (TLVs) in manufacture of other transport equipment. An actual level of mean exposure (90.2dB) exceeded TLVs in the process of wire-drawing and 90.4dB in the process of wire-stranding. 2. Dusts of type Ⅰ, Ⅱ, Ⅲ were generated in 9 types of industry and 8 types of process. Its mean concentration did not exceed TLVs. 3. Heavy metals (Pb, Mn, Cr, Ni) were generated in 7 types of industry and 7 types of process. Its mean concentration did not exceed TLVs. 4. 16 kinds of organic solvents were generated in 11 types of industry and 6 types of process. Its mean concentration did not exceed TLVs. As the above results, chemical substances and physical agents were generated in the several different types of industry and process of the manufacturing industry with less than five workers, and only mean level of noise was exceeded TLVs. In case of exceeding threshold limit values, improvement of work environment is actively needed, and work environment management should be performed continuously for prevention of an occupational diseases and work related diseases.

참고문헌 (Reference)

1 "화학물질 및 물리적인자의 노출기준" 노동부 고시 제2002-8호 2002

2 "한국표준산업분류" 도서출판 행법사 2001.

3 "조선업 종사 용접공들의 망간흄 폭로정도와 건강위해" 1997

4 "조규상. 소외된 근로자들을 위한 산업보건. 산업보건 1994" 7-12,

5 "제조업 산업장의 유기용제 노출에 관한 연구" 11 (11): 291-228, 2001

6 "정규철. 도료제조업 근로자들의 복합유기용제 폭로에 관한 연구. 한국산업위생학회지 1993" 177-187,

7 "작업환경측정 및 평가" 신광출판사 1997

8 "작업환경측정 및 정도관리규정" 노동부 고시 제2001-20호 2001

9 "자동차부품 제조업의 공정별 작업환경실태에 관한 연구" 2004

10 "일부 그라비아 인쇄업 근로자의 혼합유기용제 노출농도." 7 : 71-85, 1997

11 "예방의학과 공중보건" 계축문화사 1999

12 "소규모사업장 용접근로자들의 소음 망간 노출에 관한 연구" 2002

13 "소규모 제조업 사업장의 산업보건 서비스 실태에 관한 조사연구. 인천 한국산업안전공단" 산업보건연구원 3-4, 1995

14 "산업장보건관리실무" 상문상사 69-, 1998

15 "사업장 보건관리를 위한 업종별 산업보건 편람" 1999

16 "부산지역 일부 제조업 산업장의 기중 유해금속물질의 경시적 농도변화" 2004

17 "노동통계연감" 2003

18 "김해지역 일부 제조업 사업장의 공기중 분진에 관한 연구" 2004

19 "경인지역 일부 5인미만 사업장 근로자의 작업환경실태와 관리대책" 11 (11): 179-189, 2002

20 "Welding Fumes- Formation, Properties and Biological Effects" 1995

21 "Welding health and safety resource manual" 1984.

22 "Sjogren B. A retrospective cohort study of mortality among stainless steel welders. Scan J Work Environ Health 1980" 197-200.

23 "National Institute for Occupational Safety and Health . Manual of Analytical Methods. 4th ed.. Cincinnati Ohio" 1994.

24 "Hornung R. The use of regression analysis in a cohort mortality study of welders. J Chron Dis 1986" 287-294,

25 "Hedstrom L. Mortality in two cohorts of welders exposed to high- and low- levels of hexavalent chromium. Scan J Work Environ Health 1987" 247-251,

26 "Altman R. Occupation and lung cancer risk among New Jersey white males. JNCI 1987" 13-21,

27 "2003년 근로자 건강진단 실시결과" 노동부 42-43, 2004

28 "2001 산업재해분석" 노동부 306-, 2002