다중충돌 쇼트피닝에서 변형률 속도와 소재 경도가 잔류응력에 미치는 영향에 관한 연구

국문 초록 (Abstract)

쇼트피닝 공정은 쇼트볼이 소재에 충돌을 일으킬 때 생기는 압축잔류응력에 의해 소재의 피로 강도를 향상 시키는데 그 목적이 있다. 본 연구는 변형률 속도 민감도 변화가 압축잔류응력에 미치는 영향을 분석하기 위해서 수행되었다. 본 연구자는 변형률 속도 민감도의 영향을 고려한 쇼트피닝 다중 충돌을 ABAQUS 6.9-1 를 사용하여 모사하였다. 사용된 소재는 AISI 4340 강종이다. 본 연구자는 변형률 속도 민감성이 높은 재료와 낮은 재료를 비교하였다. 결과적으로 변형률 속도 민감성이 증가하면 압축잔류응력은 감소하였다. 또한 경도가 낮은 소재의 압축잔류응력이 경도가 높은 소재보다 더 크게 발생하였다.

다국어 초록 (Multilingual Abstract)

Shot ball impacts to materials cause residual compressive stress on their surfaces. Improving the fatigue strength of a material that has this residual compress stress is the purpose of the shot peening process. A numerical study was performed to evaluate the effect of the strain rate sensitivity and hardness of the shot ball on the residual compressive stress. We calculated the residual compressive stress due to multiple impact shot peening using ABAQUS 6.9-1. AISI 4340 steel was the material used in this study. We compared the effects of high strain rate sensitivities and low strain rate sensitivities and found that when the material’s sensitivity to the strain rate increased, the residual compressive stress decreased. In addition, the residual compressive stress of low-hardness material is higher than that of high-hardness material.

목차 (Table of Contents)

• 초록
• Abstract
• 1. 서론
• 2. 유한요소해석
• 3. 재료물성
• 4. 결과
• 5. 결론
• 후기
• 참고문헌

참고문헌 (Reference)

1 김태형, "다중충돌 피닝잔류응력 평가를 위한 소성숏이 포함된 3차원 유한요소해석 모델" 대한기계학회 32 (32): 642-653, 2008

2 Meguid, S.A, "Three-Dimensional Dynamic Finite Element Analysis of Shot-Pening Induced Residual Stresses" 31 : 179-191, 1999

3 Premack, T, "Three-Dimensional Analysis of The Impact Fracture of 4340 Steel" 32 (32): 2793-2812, 1995

4 Kim, T, "The Effect of Shot Peening Cycle on Residual Stress Distribution" 52-56, 2009

5 Park, K.-D, "The Effect of Compressive Residual Stress on Fatigue Fracture of the Spring steel" 3 (3): 79-85, 2004

6 Schiffner, K, "Simulation of Residual Stresses by Shot Peening" 72 : 329-340, 1999

7 Guaglliano, M, "Relating Almen Intensity to Residual Stresses Induced by Shot Peening:Anumerical Approach" 110 : 277-286, 2001

8 Wall, O, "Numerical Modeling of Fracture Initiation in Large Steel Specimens at Impact" 69 : 851-863, 2002

9 Barrios, D. B, "Finite Element Shot Peening Simulation for Residual Stress. Analysis and Comparison with Experimental Results" 14 : 113-121, 2005

10 Meguid, S.A., "Finite Element Modeling of Shot-Peening Residual Stresses" 92 : 401-404, 1999

11 Meo, M, "Finite Element Analysis of Residual Stress Induced by Shot Peening Process" 34 : 569-575, 2003

12 Wick., A, "Effects of Warm Peening on Fatigue Life and Relaxation Behavior of Residual Stresses in AISI 4140 Steel" 293 : 191-197, 2000

13 Menig, R, "Depth Profiles of Macro Residual Stress in Thin Shot Peened Plates Determined by X-ray and Neutron Diffraction" 45 : 977-983, 2001

14 Bhuvaraghan, B, "Analytical Solution for Single and Multiple Impacts with Strain-rate Effects for Shot Peening" 1550 (1550): 1-22, 2010

15 Lee, H, "An area-average approach to peening residual stress under multi-impacts using a three-dimensional symmetry-cell finite element model with plastic shots" ELSEVIER SCI LTD 31 : 50-59, 2010

16 Meguid, S.A, "3D FE Analysis of Peening of Strain-Rate Sensitive Materials Using Multiple Impingement Model" 27 : 119-134, 2002