고분자 단독으로는 얻을 수 없는 다양한 물성을 얻기 위하여 두 가지 이상의 고분자를 블렌드하는 기법을 많이 사용하고 있다. 폴리올레핀계 TPE(Thermoplastic Elastomer)는 디스플레이, 자동차, 가...
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
https://www.riss.kr/link?id=A105554307
2018
Korean
KCI등재
학술저널
562-570(9쪽)
0
0
상세조회0
다운로드국문 초록 (Abstract)
고분자 단독으로는 얻을 수 없는 다양한 물성을 얻기 위하여 두 가지 이상의 고분자를 블렌드하는 기법을 많이 사용하고 있다. 폴리올레핀계 TPE(Thermoplastic Elastomer)는 디스플레이, 자동차, 가...
고분자 단독으로는 얻을 수 없는 다양한 물성을 얻기 위하여 두 가지 이상의 고분자를 블렌드하는 기법을 많이 사용하고 있다. 폴리올레핀계 TPE(Thermoplastic Elastomer)는 디스플레이, 자동차, 가전제품 등에 널리 사용되고 있다. 소비자는 고감성이고 고급화된 자동차 내장부품을 요구한다. 높은 폼형성도와 흐름성이 있는 고분자소재 개발이 필요하다. 내부에 폼층이 있는 TPE은 좋은 고분자소재이다. 두 종류의 TPE 소재를 개발하였다. 첮번째 소재는 Homo-PP(PolyPropylelne)에 SEBS/Oil을 혼합하였고, 두 번째 소재는 Co-PP와 SEBS/Oil을 혼합하였다. 혼합온도는 180℃, 190℃. 260℃(두번째 소재), 혼합속도는 50rpm, 혼합시간은 5분이다. TPE의 MI(Melt Index)는 PP의 MI에 영향이 있고, 혼합온도의 영향은 미미하였다. 경도와 인장탄성률은 PP의 MI와 혼합온도의 영향은 적었으나, SEBS/Oil의 비율이 높아지면 낮아졌다. 소프트터치감은 SEBS/Oil의 비율이 증가하면 증대하였다. TPE릉 자일렌으로 SEBS/Oil 층을 녹여내어 IPN(Interpenentration polymer network)구조를 확인할 수 있었으며, Strain-harding 현상도 확인하였다. 제조한 TPE가 고무현상을 보이고, 생성된 closed cell이 안정한 상태임을 알 수 있다.
다국어 초록 (Multilingual Abstract)
New physical properties of polymer materials were obtained by blending two or three different type of polymers. TPE is used widely in the display, automotive and electronics industries. Consumers have sought emotionally more sensitive and advanced int...
New physical properties of polymer materials were obtained by blending two or three different type of polymers. TPE is used widely in the display, automotive and electronics industries. Consumers have sought emotionally more sensitive and advanced interior automotive parts. A polymer with high foamibility (Ed note: Please check this.) and flowability would be more plausible. TPE composed of foam is a good polymer material to satisfy these trends. In this research, two different TPE were tested, focusing on foamibility and flowability. Two type of TPE were prepared. The first was blended Homo-PP, oil and SEBS. The second was Co-PP, oil and SEBS. The blending temperatures were 180℃, 190℃, and 260℃(second one). The blending speed was 50rpm and blending time was 5 min. The MI of the blended material was affected by the MI of PP and not affected by the blending temperature. The hardness and tensile elasticity were less affected by the MI of PP and blending temperature. The hardness and tensile elasticity were lower at a higher SEBS/Oil content ratio. The soft touch feel was higher with high SEBS/Oil contents. The IPN (Interpenentration polymer network) structure was observed by dissolving the SEBS/Oil layer in xylene. Strain-hardening phenomena also was observed. TPE behaves in a rubber and foamed closed-cell improved its stability.
참고문헌 (Reference)
1 Kresge EN, 208 (208): 31-, 1993
2 A. K. Gupta, 29 : 1595-, 1984
3 A. K. Gupta, 29 : 1079-, 1984
4 G. Natta, 16 : 213-, 1995
5 J.P. Kirkpatrick, 120 (120): 30-, 1988
6 A.J. Tinker, 1988
7 K. Sheidl, 2000
8 K. Ziegler, 67 : 541-, 1995
9 B. Erman, "science and technology of rubber" Academic Press 1994
10 CS Schollenberge, "US Patent 2,871,218"
1 Kresge EN, 208 (208): 31-, 1993
2 A. K. Gupta, 29 : 1595-, 1984
3 A. K. Gupta, 29 : 1079-, 1984
4 G. Natta, 16 : 213-, 1995
5 J.P. Kirkpatrick, 120 (120): 30-, 1988
6 A.J. Tinker, 1988
7 K. Sheidl, 2000
8 K. Ziegler, 67 : 541-, 1995
9 B. Erman, "science and technology of rubber" Academic Press 1994
10 CS Schollenberge, "US Patent 2,871,218"
11 W.L. Semon, "US Patent 1,929,453"
12 W.P. Gergen, "Thermoplastic elastomers-a-c omprehensive review" Hanser Publishers 507-, 1987
13 S.H. Cho, "The study of Thermodynamic Elastomer PP/SEBS, Blends" Soonchunhyang Univ. 2017
14 C. S. Schollenberger, "Simulated vulcanisates of polyurethane elastomers, US patent 2,871,218"
15 A.N. Gent, "Science and technology of rubber" Academic Press 1-, 1994
16 C.S. Schollenberge, "Paper at the Rubber Division Meeting; September 13, 1957" 35 : 742-, 1962
17 D.J. George, "Handbook of thermoplastic elastomers" Elsevier 2014
18 P. H. Nam, "Foam processing and cellular structure of polypropylene/clay nanocomposites" 42 (42): 1907-1918, 2002
19 S.T. Lee, "Foam Extrusion" Technomic Publishing Company, Inc. 2000
20 M. D. Snyder, "Elastic linear copolyesters, US patent 2,623,031"
21 Bertil Ohlsson, "Blends and thermoplastic interpenetrating polymer networks of polypropylene and polystyrene- block -poly(ethylene- stat -butylene)- block -polystyrene triblock copolymer. 1: Morphology and structure-related properties" Wiley 36 (36): 501-510, 1996
22 "ASTM D412-06a Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers- Tension1"
23 "ASTM D1238-04 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer1"
24 J..W. Um, "A study on properties of Thermoplastic Elastomer(PP/SEBS) by content fo pp" Soonchunhyang Univ. 2017
Biomass Gasification 공정에서 발생하는 Tar 제거연구
맵리듀스 온라인 프레임워크에서 공간 데이터 스트림 처리를 위한 동적 부하 관리 기법
중년기 여성의 스트레스와 스트레스 대처방식의 관계에서 자아방어기제의 조절효과
학술지 이력
연월일 | 이력구분 | 이력상세 | 등재구분 |
---|---|---|---|
2026 | 평가예정 | 재인증평가 신청대상 (재인증) | |
2020-01-01 | 평가 | 등재학술지 유지 (재인증) | |
2017-07-01 | 평가 | 등재후보로 하락(현장점검) (기타) | |
2017-07-01 | 평가 | 등재학술지 선정 (계속평가) | |
2015-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2011-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2008-01-01 | 평가 | 등재학술지 선정 (등재후보2차) | |
2007-08-28 | 학술지등록 | 한글명 : 한국산학기술학회논문지외국어명 : Journal of Korea Academia-Industrial cooperation Society | |
2007-07-06 | 학회명변경 | 영문명 : The Korean Academic Inderstrial Society -> The Korea Academia-Industrial cooperation Society | |
2007-01-01 | 평가 | 등재후보 1차 PASS (등재후보1차) | |
2005-01-01 | 평가 | 등재후보학술지 선정 (신규평가) |
학술지 인용정보
기준연도 | WOS-KCI 통합IF(2년) | KCIF(2년) | KCIF(3년) |
---|---|---|---|
2016 | 0.68 | 0.68 | 0.68 |
KCIF(4년) | KCIF(5년) | 중심성지수(3년) | 즉시성지수 |
0.66 | 0.61 | 0.842 | 0.23 |