복합재료 적층판 기계적 체결부(ASTM D5961 Proc. A, B)에 대하여 치구 설계에서 시험 결과의 해석까지 전체 과정을 제시하였다. 복합재료 적층판 기계적 체결부를 유한요소법을 사용하여 분석하...
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
https://www.riss.kr/link?id=A102652740
2017
Korean
558
KCI등재,SCOPUS,ESCI
학술저널
21-29(9쪽)
0
0
상세조회0
다운로드국문 초록 (Abstract)
복합재료 적층판 기계적 체결부(ASTM D5961 Proc. A, B)에 대하여 치구 설계에서 시험 결과의 해석까지 전체 과정을 제시하였다. 복합재료 적층판 기계적 체결부를 유한요소법을 사용하여 분석하...
복합재료 적층판 기계적 체결부(ASTM D5961 Proc. A, B)에 대하여 치구 설계에서 시험 결과의 해석까지 전체 과정을 제시하였다. 복합재료 적층판 기계적 체결부를 유한요소법을 사용하여 분석하였으며 시험 결과와 비교하였다. 시험편의 파손 거동을 분석하기 위해 점진적 파손해석 방법을 유한요소법에 적용하였다. 시험 파손 하중을 예측하기 위해 3가지 파손이론(최대 응력, 최대 변형률, Tsai-Wu)을 FEM에 적용하였다. 기계적 체결부의 일반적인 변수들을 검토하였으며 주요 변수에 대하여 베어링 강도 차이를 비교하였다.
다국어 초록 (Multilingual Abstract)
In this paper, the total procedure for composite laminate mechanical joint (ASTM D5961 Proc. A, B) from fixture design to test analysis was showed. Composite laminate mechanical joints were analyzed using the FEM(Finite Element Method) and compared to...
In this paper, the total procedure for composite laminate mechanical joint (ASTM D5961 Proc. A, B) from fixture design to test analysis was showed. Composite laminate mechanical joints were analyzed using the FEM(Finite Element Method) and compared to test results. A progressive failure analysis was applied to FEM to analyze the failure behavior of test specimens. Three failure theories - maximum stress, maximum strain, and Tsai-Wu were applied to FEM to predict test failure load. General parameters for composite laminate joints were reviewed and the differences of bearing strength were compared with major parameters.
참고문헌 (Reference)
1 M.A. McCarthy, "Three-dimensional finite element analysis of single-bolt, single-lap composite bolted joints: part Ⅰ-model development and validation" 71 : 140-158, 2005
2 Fu-Kuo Chang, "Strength of Mechanically Fastened Composite Joints" 470-494, 1982
3 "Standard Test Method for Measuring the Fastener Pull-through Resistance of a Fiber-Reinforced Polymer Matrix Composite"
4 "Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates"
5 Kyle C. Warren, "Progressive failure analysis of three-dimensional woven carbon composites in single-bolt, double-shear bearing" 84 : 266-276, 2016
6 Ao Du, "Progressive damage analysis of PFRP double-lap bolted joints using explicit finite element method" 152 : 860-869, 2016
7 Alvaro Olmedo, "On the prediction of bolted single-lap composite joints" 94 : 2110-2117, 2012
8 MSC, "Nastran 2014 Nonlinear User's Guide SOL 400"
9 B. Egan, "Modelling a single-bolt countersunk composite joint using implicit and explicit finite element analysis" 64 : 203-208, 2012
10 "HL12, 97 specifications"
1 M.A. McCarthy, "Three-dimensional finite element analysis of single-bolt, single-lap composite bolted joints: part Ⅰ-model development and validation" 71 : 140-158, 2005
2 Fu-Kuo Chang, "Strength of Mechanically Fastened Composite Joints" 470-494, 1982
3 "Standard Test Method for Measuring the Fastener Pull-through Resistance of a Fiber-Reinforced Polymer Matrix Composite"
4 "Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates"
5 Kyle C. Warren, "Progressive failure analysis of three-dimensional woven carbon composites in single-bolt, double-shear bearing" 84 : 266-276, 2016
6 Ao Du, "Progressive damage analysis of PFRP double-lap bolted joints using explicit finite element method" 152 : 860-869, 2016
7 Alvaro Olmedo, "On the prediction of bolted single-lap composite joints" 94 : 2110-2117, 2012
8 MSC, "Nastran 2014 Nonlinear User's Guide SOL 400"
9 B. Egan, "Modelling a single-bolt countersunk composite joint using implicit and explicit finite element analysis" 64 : 203-208, 2012
10 "HL12, 97 specifications"
11 Tianling Qin, "Fastener effects on mechanical behaviors of double-lap composite joints" 100 : 413-423, 2013
12 Fu-Kuo Chang, "Failure of Composite Laminates Containing Pin Loaded Holes-Method of Solution" 18 : 255-276, 1984
13 Alaattin Aktas, "Experimental and numerical failure analysis of pinned-joints in composite materials" 89 : 459-466, 2009
14 Marie-Laure Dano, "Analysis of bolted joints in composite laminates: Strain and bearing stiffness predictions" 79 : 562-570, 2007
15 "ASM Handbook Vol. 21"
구조 변형이 있는 평면 위의 비정상 유동해석을 위한 준-정상 기법
CFD를 활용한 Flow Angularity 풍동시험기법의 외장분리 해석(1)
고속 디지털 카메라를 이용한 알루미늄 하니콤 샌드위치 보의 고유 진동수 계측
실시간 다중항법을 이용한 관성측정기의 비행환경 성능 검증 기법
학술지 이력
연월일 | 이력구분 | 이력상세 | 등재구분 |
---|---|---|---|
2023 | 평가예정 | 계속평가 신청대상 (등재유지) | |
2018-01-01 | 평가 | 우수등재학술지 선정 (계속평가) | |
2015-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2011-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2009-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2007-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2005-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2002-01-01 | 평가 | 등재학술지 선정 (등재후보2차) | |
1999-07-01 | 평가 | 등재후보학술지 선정 (신규평가) |
학술지 인용정보
기준연도 | WOS-KCI 통합IF(2년) | KCIF(2년) | KCIF(3년) |
---|---|---|---|
2016 | 0.28 | 0.28 | 0.27 |
KCIF(4년) | KCIF(5년) | 중심성지수(3년) | 즉시성지수 |
0.25 | 0.22 | 0.421 | 0.09 |