Effect of Cooling Rate on The Microstructure And Cryogenic Impact Toughness of HAZ in 9% Ni Steel

다국어 초록 (Multilingual Abstract)

The effects of cooling rate on the microstructure and cryogenic impact toughness of coarse-grained heat-affected zone (CGHAZ) and inter-critically reheated coarse-grained HAZ (IC CGHAZ) in 9% Ni steel were investigated. CGHAZ and IC CGHAZ specimens were prepared from 9% Ni steel by controlling the cooling rate of the simulated welding process. The microstructure of the CGHAZ specimens consisted of autotempered martensite and lath martensite. As the cooling rate increased, the volume fraction of the autotempered martensite and the effective grain size decreased. A large amount of fine carbides was distributed inside the auto-tempered martensite, the dislocation density was low, and high angle grain boundaries were not observed. The microstructure of the IC CGHAZ specimens consisted of tempered martensite and lath martensite. As the cooling rate increased, the volume fraction of the tempered martensite and effective grain size decreased. Finer carbides were distributed inside the tempered martensite than in the auto-tempered martensite, the dislocation density was low, and high angle grain boundaries were not observed. Cryogenic fracture revealed that ductile fracture occurred in the auto-tempered martensite and tempered martensite, and brittle fracture occurred in the lath martensite. The crack propagation path was zig-zag in the high angle grain boundaries of the lath martensite. The volume fraction of auto-tempered martensite and tempered martensite and the effective grain size in the HAZ specimens had a significant effect on cryogenic impact toughness. In the IC CGHAZ specimens, cryogenic impact toughness decreased and then became constant as the cooling rate increased, due to a decrease in the volume fraction of the tempered martensite and effective grain size.

참고문헌 (Reference)

1 S. S. M. Tavares, 27 : 1530-, 2018

2 J. M. Zhang, 22 : 3867-, 2013

3 X. Li, 67 : 457-, 2015

4 X. Li, 616 : 141-, 2014

5 R. L. Tobler, 16 : 669-, 1976

6 P. K. Jena, 14 : 47-, 2016

7 G. Krauss, 88 : 1-, 2017

8 Z. Cong, 52 : 2151-, 2011

9 D. C. Saha, 168 : 110564-, 2020

10 S. Morito, 43 : 1475-, 2003

11 Z. Qu, 941 : 516-, 2018

12 Q. Chen, 771 : 138621-, 2020

13 J. Jang, 340 : 68-, 2003

14 S. Kumar, 236 : 216-, 2016

15 P. Zhou, 722 : 112-, 2018

16 X. J. Di, 21 : 366-, 2016

17 J. Nam, 35 : 2069-, 2018

18 H. K. Sung, 45 : 3036-, 2014

19 T. Maki, 20 : 207-, 1980

20 R. W. Fonda, 31 : 683-, 1994

21 E. J. Barrick, 748 : 189-, 2019

22 G. Spanos, 26 : 3277-, 1995

23 R. W. Fonda, 45 : 5982-, 2014

24 H. Pous-Romero, 136 : 031402-, 2014

25 J. H. Pak, 28 : 918-, 2012

26 J. H. Pak, 66 : 951-, 2012

27 J. H. Pak, 13 : 593-, 2008

28 H. K. D. H. Bhadeshia, 59 : 689-, 2006

29 김재원, "초고강도강 저항 점용접 연속타점시 전극의 국부적 합금화 현상이 용접품질 저하에 미치는 영향 연구" 대한금속·재료학회 57 (57): 715-725, 2019

30 조성규, "베이나이트계 후판강의 모재 및 열영향부의 미세조직과 기계적 특성에 미치는 화학 조성의 영향" 한국재료학회 29 (29): 211-220, 2019

31 이희근, "극저온용 Fe-36%Ni강 자동 용접부의 White spot 생성 원인 분석" 대한금속·재료학회 57 (57): 771-777, 2019

32 이승완, "고강도 API 라인파이프강의 저온 인성에 미치는 베이나이트계 미세조직의 영향" 대한금속·재료학회 58 (58): 293-303, 2020

33 Xiaohui Xi, "Tailoring Mechanical Properties of a Low Carbon Cu-Containing Structural Steel by Two-Step Intercritical Heat Treatment" 대한금속·재료학회 25 (25): 1477-1487, 2019

34 D. A. Porter, "Phase Transformations in Metals and Alloys" Taylor & Francis 344-, 2008

35 Z. Pei, "Influence of Martensite and Bainite Microstructure on Local Mechanical Properties of a Bainitic and Martensitic Multiphase Cast Steel"

36 Jisung Yoo, "Effects of V or Cu Addition on High‑Temperature Tensile Properties of High‑Ni‑Containing Austenitic Cast Steels Used for High‑Performance Turbo‑Charger Housings" 대한금속·재료학회 25 (25): 285-294, 2019

37 Zishan Yao, "Effects of Ni and Cr on Cryogenic Impact Toughness of Bainite/Martensite Multiphase Steels" 대한금속·재료학회 25 (25): 1151-1160, 2019