EVA 수지 이용 연료유 생성을 위한 열분해 반응에서 실리카-알루미나 계열 무기물의 영향 = The Effects of Silica-Alumina Type Inorganic Compounds on the Pyrolysis Reaction of EVA to Produce Fuel-Oil

다국어 초록 (Multilingual Abstract)

The effects of silica-alumina type catalysts addition on the thermal decomposition of ethylene vinyl acetate (EVA) resin have been studied in a thermal analyzer (TGA, DSC) and a small batch reactor. The silica-alumina type compounds tested were kaolinite, bentonite, perlite, activated clay and clay. As the results of TGA experiments, pyrolysis starting temperature for EVA resin had the 1st pyrolysis temperature range of 300~400℃ and the 2nd pyrolysis temperature range of 425~525℃. The silica-alumina type catalysts did not affect the pyrolysis rate in EVA pyrolysis reaction. In the DSC experiments, addition of kaolinite and bentonite catalysts reduced the heat of fusion and heat of 2nd pyrolysis reaction. In the batch system experiments, the mixing of silica-alumina type catalysts enhanced the yield of fuel oil, and affected to the distribution of carbon numbers. In the silica-alumina type inorganic material used in this experiments, bentonite was the most effective from the pyrolysis heat, yields, and the characteristics of fuel oil.

참고문헌 (Reference)

1 김동찬, "폐플라스틱의 열분해/촉매분해에 의한 생성오일의 품질 평가" 한국폐기물자원순환학회 22 (22): 765-773, 2005

2 D. W. Park, "폐플라스틱 분해용 촉매 및 이 촉매를 이용한 폐플라스틱의 분해 반응"

3 G. Seo, "폐고분자 물질의 액상 분해용 촉매의 제조 방법 및 이를 이용한 분해 방법"

4 이경환, "열가소성 폐플라스틱의 열분해에 의한 오일 생산에서 플라스틱 종류의 영향" 한국폐기물자원순환학회 21 (21): 646-651, 2004

5 주은선, "수소 연료생산의 효율 향상을 위한 초음파 응용에 관한 연구" 한국수소및신에너지학회 14 (14): 187-194, 2003

6 M. A. Uddin, "Thermal and catalytic degradation of structually different types of polyethylene into fuel oil" 56 (56): 37-44, 1997

7 P. Onu, "Thermal and catalytic decomposition of polyethylene and polypropylene" 49 (49): 145-153, 1999

8 A. Marcilla, "TGA/FTIR Study of the Evolution of the Gases Evolved in the Catalytic Pyrolysis of Ethylene-vinyl Acetate Copolymers. Comparison among Different Catalysts" 89 (89): 454-460, 2005

9 K. Gobin, "Polymer Degradation to Fuels over Microporous Catalysts as a Novel Tertiary Plastic Recycling Method" 83 (83): 267-279, 2004

10 N. P. Jang, "Liquidphase degradation of waste agricultural film over used-FCC catalyst" 41 (41): 694-699, 2003

11 D. P. Serrano, "Feedstock recycling of agriculture plastic film wastes by catalytic cracking" 49 (49): 257-265, 2004

12 G. Seo, "FCC 공정 폐촉매로부터 폐고분자 물질의 액상 분해용 촉매의 제조 방법과 이 촉매를 이용한 폐고분자 물질의 분해 특성"

13 D. C. Kim, "Effect of thermal and catalytic decomposition condition on decomposition lapse time and oil quality in plastic wastes into fuel oil" 26 (26): 1232-1237, 2004

14 Y. Sakata, "Degradation of polyethylene and polypropylene into fuel oil by using solid acid and non-acid catalysts" 51 (51): 135-155, 1999

15 JongJinPark, "Characteristics of LDPE Pyrolysis" 한국화학공학회 19 (19): 658-662, 2002

16 G. Elordi, "Catalytic pyrolysis of HDPE in continuous mode over zeolite catalysts in a conical spouted bed reactor" 85 (85): 345-351, 2009

17 J. Aguado, "Catalytic cracking of polyethylene over zeolite mordenite with enhanced textural properties" 85 (85): 352-358, 2009

18 G. Manos, "Catalytic Cracking of Polyethylene over Clay Catalysts. Comparison with an Ultrastable Y Zeolite" 40 (40): 2220-2225, 2001

19 A. Marcilla, "Catalyst addition in polyethylene pyrolysis Thermogravimetric study" 58 : 117-126, 2001