A comparative study on color and dimensional stability of esthetic indirect dental materials

다국어 초록 (Multilingual Abstract)

In selecting dental materials, color and dimensional stability play key roles in mechanical characteristics as well as esthetic aspects.
While resin nano ceramics have been examined to determine their mechanical characteristics in carious experiments, few studies have focused on their intra-oral stability, specifically their long-term color stability or water sorption. In this study, ceramic, resin nano ceramic, and composite resin were analyzed to evaluate their color stability, water sorption, and solubility. The amount of characteristic changes was measured using a spectrometer, an electronic scale, and a caliper for durations of 1, 2, 4, and 8 weeks. The results showed that ceramic was the most stable among all materials, whereas resin nano ceramic and composite resin demonstrated time-dependent changes, which require more clinical considerations for long-term use.

참고문헌 (Reference)

1 이창용, "표면조도가 치과수복용 CAD/CAM 세라믹-고분자 블록의 기계적 물성에 미치는 영향" 대한치과재료학회 45 (45): 111-128, 2018

2 이종혁, "치과용 심미수복재료 세로모에서 수분흡수와 체적 변화에 관한 연구" 대한치과보철학회 47 (47): 119-124, 2009

3 박진홍, "리튬 다이실리케이트 결정화 유리를 이용한 CAD/CAM용 컴포짓 레진 블록의 제조" 대한치과재료학회 43 (43): 247-256, 2016

4 박성호, "광중합형 구치부 수복재료의 중합수축량과 중합수축력" 대한치과보존학회 28 (28): 348-353, 2003

5 Werner H. Mörmann, "Wear characteristics of current aesthetic dental restorative CAD/CAM materials: Two-body wear, gloss retention, roughness and Martens hardness" Elsevier BV 20 : 113-125, 2013

6 John F. McCabe, "Water absorption, dimensional change and radial pressure in resin matrix dental restorative materials" Elsevier BV 25 (25): 4001-4007, 2004

7 정창섭, "The evaluation of the shear bond strength between various Hybrid CAD/CAM restorative materials and repairing composite resins" 대한치과재료학회 45 (45): 45-56, 2018

8 Um CM, "Staining of resin-based veneering materials with coffee and tea" 22 : 377-386, 1991

9 Chandni Jain, "Spectrophotometric evaluation of the color changes of different feldspathic porcelains after exposure to commonly consumed beverages" Georg Thieme Verlag KG 07 (07): 172-180, 2019

10 Draughn RA, "Restorative dental materials: an overview" Fédération Dentaire Internationale 75-107, 1985

11 Frank A. Spitznagel, "Resin Bond to Indirect Composite and New Ceramic/Polymer Materials: A Review of the Literature" Wiley 26 (26): 382-393, 2014

12 Renan Belli, "Mechanical fatigue degradation of ceramics versus resin composites for dental restorations" Elsevier BV 30 (30): 424-432, 2014

13 T. Hirasawa, "Materials Science" SAGE Publications 62 (62): 28-31, 2016

14 Kim SJ, "Marginal fitness and marginal leakage of fiber-reinforced composite crowns depending upon luting cements" 38 : 618-630, 2000

15 Koller M, "Lava ultimate resin nano ceramic for CAD/ CAM : customization case study" 15 : 159-164, 2012

16 Noort RV, "Introduction to dental materials" Mosby 96-123, 2002

17 J.G. Calais, "Influence of Filler Type and Water Exposure on Flexural Strength of Experimental Composite Resins" SAGE Publications 67 (67): 836-840, 2016

18 A. SEGURA, "In vitro posterior composite polymerization recovery following hygroscopic expansion" Wiley 20 (20): 495-499, 1993

19 N.M. MOHSEN, "Hydrolytic stability of silanated zirconia-silica-urethane dimethacrylate composites" Wiley 22 (22): 213-220, 1995

20 Ahmet Umut Guler, "Effects of different drinks on stainability of resin composite provisional restorative materials" Elsevier BV 94 (94): 118-124, 2005

21 Sakineh Nikzad, "Effects of beverage colorants and accelerated aging on the color stability of indirect resin composites" Elsevier BV 7 (7): 231-237, 2012

22 R.R. Seghi, "Effects of Instrument-measuring Geometry on Colorimetric Assessments of Dental Porcelains" SAGE Publications 69 (69): 1180-1183, 2016

23 Till N. Göhring, "Effect of water storage, thermocycling, the incorporation and site of placement of glass-fibers on the flexural strength of veneering composite" Elsevier BV 21 (21): 761-772, 2005

24 Simon Flury, "Effect of artificial toothbrushing and water storage on the surface roughness and micromechanical properties of tooth-colored CAD-CAM materials" Elsevier BV 117 (117): 767-774, 2017

25 Terry DA, "Direct applications of a nanocomposite resin system : part 1--The evolution of contemporary composite materials" 16 : 417-422, 2004

26 Harry Øysaed, "Composites for use in posterior teeth: Mechanical properties tested under dry and wet conditions" Wiley 20 (20): 261-271, 1986

27 Didier Dietschi, "Comparison of the color stability of ten new-generation composites: An in vitro study" Elsevier BV 10 (10): 353-362, 1994

28 장대은, "Color stability, water sorption and cytotoxicity of thermoplastic acrylic resin for non metal clasp denture" 대한치과보철학회 7 (7): 278-287, 2015

29 Vishal Jain, "Color stability, gloss, and surface roughness of indirect composite resins" Nihon University School of Dentistry 55 (55): 9-15, 2013

30 Yi YJ, "Color stability of ceromers after thermocycling and brushing" 39 : 37-48, 2001

31 Wilmer Fabián Sepúlveda-Navarro, "Color Stability of Resins and Nylon as Denture Base Material in Beverages" Wiley 20 (20): 632-638, 2011

32 L Musanje, "Aspects of water sorption from the air, water and artificial saliva in resin composite restorative materials" Elsevier BV 19 (19): 414-422, 2003

33 Ryu SY, "A study on the color stability of porcelain for porcelain fused to metal crown" 38 : 73-84, 2000