Cooking 시간 단축 첨가제가 혼입된 구스 매스틱 아스팔트 (EQ-Mastic Asphalt) 혼합물 평가

다국어 초록 (Multilingual Abstract)

PURPOSES : The purpose of this study was to evaluate the newly developed Guss mastic asphalt mixtures, called EQ-mastic asphalt mixtures, which contain melted additives for decreasing cooking time.
METHODS : A series of experiments were performed to investigate the effectiveness of the melted additives in EQ-mastic asphalt mixtures. Both the existing Guss mastic asphalt mixture and the EQ-mastic asphalt mixture were produced with the same amounts of asphalt binders, aggregates, and fillers, but the existing Guss mastic asphalt mixture contained 3% Trinidad lake asphalt (TLA). The EQ-mastic asphalt mixture contained 3% of additives, including TLA and polyolefin. The physical material performances of both mastic asphalt mixtures were obtained by conducting the Luer fluidity test, penetration test, dynamic stability test, and low-temperature bending test. The results of the tests for the existing Guss mastic and EQ-mastic asphalt mixtures were compared.
RESULTS : The fluidity, penetration, dynamic stability, and low-temperature bending strains of both the existing Guss mastic and EQmastic asphalt mixtures all satisfied the standard values provided in the production and construction guides of the Guss mastic asphalt pavement.
CONCLUSIONS : When melted additives containing polyolefin are used in the production of Guss mastic asphalt mixtures, the cooking time decreases, so that the corresponding energy consumption and asphalt fume amount can be reduced. Therefore, an EQ-mastic asphalt mixture is proposed for use as an eco-friendly pavement material.

목차 (Table of Contents)

• ABSTRACT
• 1. 서론
• 2. 재료 및 장치
• 3. 혼합물 실험
• 3.1. 아스팔트 바인더 개질을 위한 첨가제
• 3.2. 입도 분포
• 3.3. 배합설계 및 혼합
• 3.4. 혼합물 물성 시험
• 4. 실험 결과 및 분석
• 4.1. 아스팔트 바인더 적외선 분광 스펙트럼 분석
• 4.2. 매스틱 아스팔트 혼합물의 유동성 분석
• 4.3. 내구성능 분석
• 5. 결론
• REFERENCES

참고문헌 (Reference)

1 원종일, "폴리올레핀 복합소재의 UV 광열화 특성" 한국공업화학회 20 (20): 511-516, 2009

2 임광희, "SIS-SBS 개질아스팔트 방수시트재 물성 최적화" 한국화학공학회 55 (55): 690-697, 2017

3 Zhu, J., "Polymer modification of bitumen: Advances and challenges" 54 : 18-38, 2014

4 Beitchman, B. D., "Infrared spectra of asphalt" 63A (63A): 189-193, 1959

5 Wei, J., "Influence of commercial wax on performance of asphalt" ASCE 22 (22): 760-766, 2010

6 Shanks, R. A., "General purpose elastomers:Structure, chemistry, physics and performance" 11 : 11-45, 2013

7 Ragni, D., "Effect of temperature and chemical additives on the short-term ageing of polymer modified bitumen for WMA" 160 : 514-526, 2018

8 Hwang, S. D., "Domestic and foreign technology status of warm mix asphalt pavements" 10 (10): 24-29, 2008

9 Ministry of Land, Infrastructure and Transport, "Construction guide of asphalt concrete pavement"

10 Wei, B. J., "Characterization of asphalt binders based on chemical and physical prope" 3 : 33-58, 1994

11 Zhao, Y., "Analysis of aging mechanism of SBS polymer modified asphalt based on Fourier transform infrared spectrum" 25 : 1047-1052, 2010