가열·재색변환처리 목재를 이용한 생활용품개발에 관한 연구 = A study on the development of living products using heat and color conversion treated woods

다국어 초록 (Multilingual Abstract)

This study was carried out to investigate the physical and mechanical properties of 6 hardwoods before and after heat treatment in an effort to produce the high quality industrial lumber product.
The results were as follows. Specific gravities of green woods were in range from 0.90 to 1.10. The specific gravities of never treated woods showed higher than those of the heat treated woods. The shrinkage of heat treated woods when green to air & oven dry was significantly low, compared to never treated woods.
The compression strengths parallel to grain of heat treated woods showed higher than those of never treated woods. The moduli of rupture (MOR) of never treated and heat treated woods were 176.4N/㎟∼102.8N/㎟ and 100.1N/㎟∼61.2N/㎟ respectively. MORs of heat treated woods showed lower than those of never treated woods. There was no significant change in the modulus of elasticity (MOE) before and after heat treatment.

다국어 초록 (Multilingual Abstract)

This study was carried out to investigate the physical and mechanical properties of 6 hardwoods before and after heat treatment in an effort to produce the high quality industrial lumber product.
The results were as follows. Specific gravities of green woods were in range from 0.90 to 1.10. The specific gravities of never treated woods showed higher than those of the heat treated woods. The shrinkage of heat treated woods when green to air & oven dry was significantly low, compared to never treated woods.
The compression strengths parallel to grain of heat treated woods showed higher than those of never treated woods. The moduli of rupture (MOR) of never treated and heat treated woods were 176.4N/㎟∼102.8N/㎟ and 100.1N/㎟∼61.2N/㎟ respectively. MORs of heat treated woods showed lower than those of never treated woods. There was no significant change in the modulus of elasticity (MOE) before and after heat treatment.

참고문헌 (Reference)

1 한국산업규격, "한국표준협회 KS F2198,2201,2202,2203,2206,2208,2209"

2 정성호, "한국산 유용수종의 목재성질" 208-368, 2008

3 강호양, "은사시나무 판재의 열기건조, 고온건조, 마이크로파-진공 건조" 한국목재공학회 31 (31): 31-37, 2003

4 김광모, "백합나무와 삼나무 열처리재의 재질 및 물성 평가" 한국목재공학회 2009 학술발표지요약집 179-180, 2009

5 小幡栄一, "熱処理木材の吸湿性(第2報)" 48 (48): 288-295, 2002

6 Tejada, Alvaro, "Reduction of growth stress in logs by direct heat treatment: Assessment of a commercial-scale operation" 47 (47): 86-93, 1997

7 권구중, "Polyethylene glycol(PEG)처리에 의한 국내산 소경재의 치수안정화에 관한 연구II- 환경재와 산공재의 비교 -" 한국목재공학회 31 (31): 8-15, 2003

8 Esteves, B. M., "Pine wood modification by heat treatment in air" 3 (3): 142-154, 2008

9 Garrote, G., "Hydrothermal processing of lignocellulosic materials" 57 (57): 191-202, 1999

10 Ledig, S. F., "Charaterization of surface color during wood processing" 288-293, 2001

11 Bhuiyan, M. T. R., "Changes of crystallinity in wood cellulose by heat treatment under dried and moist conditions" 46 (46): 431-436, 2000