Numerical Simulation of Thermal and Residual Stress Field Induced by Three-Pass TIG Welding of Al 2219 Considering the Effect of Interpass Cooling

다국어 초록 (Multilingual Abstract)

One of the main factors affecting weld joints manufactured using multi-pass welding is the accumulation of high temperature between the finished and subsequent weld pass (Interpass temperature). Consequently, resulting in adverse effects to the mechanical performance of weld, thus, increasing the failure tendency. Therefore, controlling the interpass temperature is crucial to enhance the reliability of the weld joints fabricated using multiple weld passes. In this paper, the finite element method is used to analyze the thermal distribution, residual stresses, and interpass temperature developing due to the threepass TIG welding of Al 2219. DFLUX user subroutine code was used to simulate the moving weld torch with distributed power density. An interpass cooling process was established, which significantly decreases the interpass temperature to an acceptable limit for Aluminum alloys. The experimental measurements of temperature and residual stresses were used to validate the numerical model. Finally, the effect of welding heat on the grain size of heat affected zone was analyzed using the electron backscatter diffraction.

참고문헌 (Reference)

1 David, S. A., "Welding: solidifi cation and microstructure" 55 (55): 14-20, 2003

2 Yupiter, H. P., "Welding distortion analysis of multi-pass joint combination with diff erent sequences using 3D FEM and experiment" 111–112 : 89-98, 2013

3 Obeid, O., "Thermo-mechanical analysis of a single-pass weld overlay and girth welding in lined pipe" 26 : 3861-3876, 2017

4 Attarha, M. J., "Study on welding temperature distribution in thin welded plates through experimental measurements and fi nite element simulation" 211 : 688-694, 2011

5 Rong, Y., "Study of welding distortion and residual stress considering nonlinear yield stress curves and multi-constraint equations" 25 : 4484-4494, 2016

6 Ojo, O. A., "Study of the fusion zone and heat-aff ected zone microstructures in tungsten inert gas welded INCONEL 738LC superalloy" 37A : 421-, 2006

7 방희선, "Structural Analysis of Automotive Cowl Parts Considering Welding Residual Stress" 한국정밀공학회 18 (18): 729-737, 2017

8 Lidam, R. H., "Simulation study on multi-passed welding distortion of combined joint types using thermo-elasticplastic FEM" 9 : 1-6, 2012

9 Noyan, I. C., "Residual stressstrain analysis in thin fi lms by X-ray diff raction" 20 (20): 125-177, 1995

10 손영기, "Prediction of Residual Stress and Deformation of Enameled Steel" 한국정밀공학회 16 (16): 1647-1653, 2015

11 Obeid, O., "Numerical simulation of thermal and residual stress fi elds induced by lined pipe welding" 5 : 1-14, 2018

12 Dean, D., "Numerical simulation of temperature fi eld and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurements" 37 : 269-277, 2006

13 Almeida, D. F., "Numerical simulation of residual stresses induced by TIG butt-welding of a thin plate made of AISI 3I6L stainless steel" 5 : 633-639, 2017

14 Abburi, V. K., "Numerical simulation of a three-pass TIG welding using a fi nite element with validation from measurements" 164 : 68-79, 2018

15 Nur, S., "Numerical simulation - from theory to industry" IntechOpen Limited 584-602, 2012

16 Lin, C., "Numerical and experimental investigation on microstructure and residual stress of multi-pass hybrid laser-arc welded 316L steel" 168 : 107653-, 2019

17 주성민, "Numerical Investigation on Welding Residual Stress and Out-of-Plane Displacement during the Heat Sink Welding Process of Thin Stainless Steel Sheets" 한국정밀공학회 17 (17): 65-72, 2016

18 Jie Xia, "Numerical Analysis for Controlling Residual Stresses in Welding Design of Dissimilar Materials Girth Joints" 한국정밀공학회 19 (19): 57-66, 2018

19 Liu, L., "Modifi cation of the constitutive model and evolution of activation energy on 2219aluminum alloy during the warm deformation process" 29 (29): 448-459, 2019

20 Rossini, N., "Methods of measuring residual stresses in components" 35 : 572-588, 2012

21 Deus, A. M., "Laser processing" Springer 1996

22 김경학, "Influence of Preheating Source on Mechanical Properties and Welding Residual Stress Characteristics in Ultra Thin Ferritic Stainless Steel Hybrid Friction Stir Welded Joints" 한국정밀공학회 4 (4): 393-400, 2017

23 Bhatti, A. A., "Infl uence of thermo-mechanical material properties of diff erent steel grades on welding residual stresses and angular distortion" 65 (65): 878-889, 2015

24 Liang, L., "In situ weak magnetic-assisted thermal stress fi eld reduction eff ect in laser welding" 49 : 198-209, 2018

25 Zhang, H., "Fundamental studies on in-process controlling angular distortion in asymmetrical double-sided arc welding" 205 : 214-223, 2008

26 Ahmad, A. S., "Finite element prediction of residual stress and deformation induced by doublepass TIG welding of Al 2219 plate" 12 : 2251-, 2019

27 Bathe, K. J, "Finite Element Procedures" Prentice-Hall 1996

28 Akira, M., "Fast three-dimensional multi-pass welding simulation using an iterative substructure method" 215 : 30-41, 2015

29 Bette, "Fabrication, applications to engineering" SLV Duisburg Gmbh 1999

30 고대훈, "FE-simulation coupled with CFD analysis for prediction of residual stresses relieved by cryogenic heat treatment of Al6061 tube" 한국정밀공학회 14 (14): 1301-1309, 2013

31 김대영, "FE Modelling of Al-Alloy Weld Joints using Random Mixing Method" 한국정밀공학회 19 (19): 1681-1688, 2018

32 Yan-jun, Li, "Eff ects of welding parameters on weld shape and residual stresses in electron beam welded Ti2AlNb alloy joints" 29 : 67-76, 2019

33 Yan, M., "Eff ect of interpass temperature on in situ alloying and additive manufacturing of titanium aluminides using gas tungsten arc welding" 8 : 71-77, 2015

34 Park, J. U., "Eff ect of external load on angular distortion in fi llet welding" 42 : 403-410, 2012

35 김재웅, "Design of a Laser Welded Thin Metal Tube Structure Incorporating Welding Distortion and Residual Stress" 한국정밀공학회 11 (11): 925-930, 2010

36 Goldak, J. A., "Computational welding mechanics" Springer 2006

37 G oldak, J., "Computational heat transfer for weld mechanics" 15-20, 1986

38 Fachinotti, V. D., "Analytical solutions of the thermal fi eld induced by moving double-ellipsoidal and double-elliptical heat sources in a semi-infi nite body" 27 (27): 595-607, 2011

39 "ABAQUS Documentation 14. Dassault Systemes: Providence"

40 Goldak, J., "A new fi nite element model for welding heat sources" 15 (15): 299-305, 1984

41 김용래, "A Study on the Thermal Stress Analysis of Thick Plate Structures in Post Weld Heat Treatment" 한국정밀공학회 14 (14): 247-252, 2013

42 Liang, L., "A CFD-FEM model of residual stress for electron beam welding including the weld imperfection eff ect" 50 : 2246-2258, 2019