Research on Influence of Matrix Component on the Mechanical Behavior of Multiaxial Warp-knitted Composites

다국어 초록 (Multilingual Abstract)

The mass ratio of curing agent to epoxy resin is one of the important factors affecting the behavior of matrix andcomposites. In this paper, the solution of curing agent to epoxy resin with different mass ratio (0.25, 0.30, 0.35 and 0.40) wasselected as matrix, quadriaxial warp-knitted fabric was selected as reinforcement, and the composites were manufactured byapplying vacuum assisted film infusion. Then the tensile and bending behavior of the composites was experimentallyinvestigated, and the curing degree and failure mechanism of the composites were analyzed with respect to thethermodynamic properties and the microscopic failure morphologies. The optimal mass ratio was obtained by applyingnonlinear fitting and verified by experiment, and a mathematical model was derived to predict the relationship between thestrength and the mass ratio. The results showed that the thermal stability, curing degree, tensile and bending strength of thespecimens increase firstly and then decrease with increase of the mass ratio. According to the tensile and bending strengthresults, the optimum mass ratio were obtained as 0.31 and 0.33 by applying nonlinear fitting to the experiment data. Theresults could lay a theoretical foundation for optimizing the mass ratio of matrix components, and improve the strength ofcomposites.

참고문헌 (Reference)

1 Z. Gao, 34 : 144-, 2013

2 B. Tang, 131 : 40611-, 2014

3 D. S. Lobanov, 52 : 767-, 2017

4 N. Liu, 46 : 10-, 2017

5 B. Liang, 28 : 110-, 2016

6 Y. Wang, 42 : 6478-, 2021

7 Z. Wang, 41 : 1515-, 2015

8 G. Mittal, 138 : 122-, 2018

9 X. Gao, 159 : 173-, 2019

10 N. Tian, 424 : 127393-, 2022

11 X. Pei, 91 : 296-, 2016

12 T. Dong, 417 : 126133-, 2021

13 F. Chen, 34 : 292-, 2022

14 G. Withers, 72 : 175-, 2015

15 X. Luo, 30 : 803-, 2018

16 E. Mouri, 18 : 2261-, 2017

17 W. Shang, 32 : 793-, 2020

18 Y. Shi, 354 : 208-, 2018

19 D. Zhang, 7 : 93-, 2021

20 Y. Li, 2203 : 3008-, 2013

21 X. Men, 27 : 497-, 2015

22 L. Shahriari, 134 : 66-, 2019

23 S. Santa, 6425 : 146-, 2021

24 H. Miki, 39 : 648-, 2020

25 Z. Hua, 50 : 180-, 2022

26 S. Ma, 60 : 11621-, 2021

27 J. Qin, 117 : 831-, 2014

28 Jiaojiao Xi ; Jingyun Yu ; Zhiqiang Yu, "The Effect of Single and Double-wefted Styles on the In-plane Impact Behavior of Fabric Carbon-aramid/Epoxy Intralayer Hybrid Composite Laminates" 한국섬유공학회 20 (20): 1301-1310, 2019

29 Cong Wang ; Xiaoping Gao ; Yonggui Li, "Mechanical Properties Improvement of Nanoclay Addition Epoxy 3D Orthogonal Woven Composite Material" 한국섬유공학회 20 (20): 1495-1503, 2019

30 Zheng Min Huang ; 김형민 ; 윤재륜 ; 송영석, "Injection Molding of Carbon Fiber Composite Automotive Wheel" 한국섬유공학회 20 (20): 2665-2671, 2019

31 S. Aparna ; D. Purnima ; R.B. Adusumalli, "Effect of Compatibilizer on the Properties of Polyamide 6 Blend Based Carbon Fiber Reinforced Composites" 한국섬유공학회 19 (19): 1335-1346, 2018

32 Jana Novotna ; Vijay Baheti ; Blanka Tomkova ; Jiri Militky ; Jan Novak, "Development of Multilayered Nanocomposites for Applications in Personal Protection" 한국섬유공학회 19 (19): 1288-1294, 2018