구심터빈 탈설계 성능예측에서의 손실모델 영향 = Effect of Loss Models on the Off-Design Point Performance Prediction of Radial-Type Turbine

다국어 초록 (Multilingual Abstract)

Recently, radial-type turbine, which adopted refrigerant instead of air as the working fluid, is applied for power generation from renewable energy such as waste heat or solar energy. A lot of researches on the radial-type turbine used various working fluid have been progressed. In this study, several loss models are used to perform the performance prediction of turbines. The effects of each loss model are investigated and the correct direction for performance prediction is suggested. For this purpose, the loss at the nozzle, the expansion loss at the trailing edge of the nozzle, the loss in the vaneless space, the profile loss at the rotor, the incident loss, the windage loss, the tip clearance loss, and the rotor trailing edge loss are applied. The results of the performance prediction are compared with the previous experimental results. The most influential loss is the profile loss, and the difference of the prediction result occurs according to the profile loss model.

참고문헌 (Reference)

1 Whitfield, A., "The Preliminary Design of Radial Inflow Turbines" 1989

2 Rogers, C., "Small High Pressure Ratio Radial Turbine Technology" VKI 1987

3 Bernard, M. C. S., "Radial Gas Turbines" 183 (183): 57-70, 1968

4 Zheng, Y., "Preliminary Design and Off-Design Performance Analysis of an Organic Rankine Cycle Radial-Inflow Turbine Based on Mathematic Method and CFD Method" 112 : 25-37, 2017

5 Rahbar, K., "Parametric Analysis and Optimization of a Small-Scale Radial Turbine for Organic Rankine Cycle" 83 : 696-711, 2015

6 Nithesh, K. G., "Numerical Prediction of the Performance of Radial Inflow Turbine Designed for Ocean Thermal Energy Conversion System" 167 : 1-16, 2016

7 Streeter, V. L., "Handbook of Fluid Dynamics" McGraw-Hill 1961

8 Glassman, A. J., "Enhanced Analysis and Users Manual for Radial-Inflow Turbine Conceptual Design Code RTD" NASA 1995

9 Whitfield, A., "Design of Radial Turbomachines" Longman Scientific and Technical 1990

10 Sparker, W. A., "Contour Clearance Losses in Radial Inflow Turbines for Turbochargers" ASME 1987

11 Glassman, A. J., "Computer Program for Design Analysis of Radial-Inflow Turbines" NASA 1976

12 Meitner, P. L., "Computer Code for Off-Design Performance Analysis of Radial-lnflow Turbines With Rotor Blade Sweep" NASA 1983

13 Wasserbauer, C. A, "Cold Performance Evaluation of a 4.59-Inch Radial-Inflow Turbine Designed for a Brayton-Cycle Space Power System" NASA 1966

14 Nusbaum, W. J., "Cold Performance Evaluation of 4.97-Inch Radial-Inflow Turbine Designed for Single-Shaft Brayton Cycle Space Power System" NASA 1969

15 Moustapha, H., "Axial and radial turbines" White River Junction: Concepts NREC 2003

16 Rohlik, H. E., "Analytical Determination of Radial Inflow Turbine Design Geometry for Maximum Efficiency" NASA 1968

17 Todd, C. A., "A Fortran IV Program to Estimate the Off-design Performance of Radial Inflow Turbines" NASA 1969