Experimental Research on Bond Behaviour of Fabric Reinforced Cementitious Matrix Composites for Retrofitting Masonry Walls

다국어 초록 (Multilingual Abstract)

Fabric reinforced cementitious matrix (FRCM) composites, also known as textile reinforced mortars (TRM), an inorganic matrix constituting fibre fabrics and cement-based mortar, are becoming a widely used composite material in Europe for upgrading the seismic resistance of existing reinforced concrete (RC) frame buildings. One way of providing seismic resistance upgrading is through the application of the proposed FRCM system on existing masonry infill walls to increase their stiffness and integrity. To examine the effectiveness of this application, the bond characteristics achieved between (a) the matrix and the masonry substrate and (b) the fabric and the matrix need to be determined. A series of experiments including 23 material performance tests, 15 direct tensile tests of dry fabric and composites, and 30 shear bond tests between the matrix and brick masonry, were carried out to investigate the fabric-to-matrix and matrix-to-substrate bond behaviour. In addition, different arrangements of extruded polystyrene (XPS) plates were applied to the FRCM to test the shear bond capacity of this insulation system when used on a large-scale wall.

목차 (Table of Contents)

• Abstract
• 1 Introduction
• 2 Test Setup
• 3 Test Results
• 4 Failure Mechanisms
• 5 Failure Modes Analysis
• 6 Conclusions
• 7 Further Discussion
• References

참고문헌 (Reference)

1 Arboleda, D., "Testing procedures for the uniaxial tensile characterization of fabric-reinforced cementitious matrix composites" 20 : 04015063-, 2016

2 De Santis, S., "Test methods for textile reinforced mortar systems" 127 : 121-132, 2017

3 De Santis, S., "Tensile behaviour of mortar-based composites for externally bonded reinforcement systems" 68 : 401-413, 2015

4 Caggegi, C., "Tensile behaviour of a basalt TRM strengthening system : Influence of mortar and reinforcing textile ratios" 130 : 90-102, 2017

5 김희승, "Tensile Properties of Carbon Fiber-Textile Reinforced Mortar (TRM) Characterized by Different Anchorage Methods" 한국콘크리트학회 12 (12): 977-989, 2018

6 Signorini, C., "Silica coating for interphase bond enhancement of carbon and AR-glass Textile Reinforced Mortar(TRM)" 141 : 191-202, 2018

7 Blanksvärd, T., "Shear strengthening of concrete structures with the use of mineral-based composites" 13 : 25-34, 2009

8 De Santis, S., "Round Robin Test on tensile and bond behaviour of Steel Reinforced Grout systems" 127 : 100-120, 2017

9 De Felice, G., "Recommendation of RILEM Technical Committee 250-CSM : Test method for Textile Reinforced Mortar to substrate bond characterization" 51 : 95-, 2018

10 Aggarwal, L., "Properties of polymer-modified mortars using epoxy and acrylic emulsions" 21 : 379-383, 2007

11 Carozzi, F. G., "Mechanical properties and debonding strength of Fabric Reinforced Cementitious Matrix(FRCM)systems for masonry strengthening" 70 : 215-230, 2015

12 Gianmarco de Felice, "Lessons Learned on the Tensile and Bond Behavior of Fabric Reinforced Cementitious Matrix (FRCM) Composites" Frontiers Media SA 6 : 2020

13 Scheffler, C., "Interphase modification of alkali-resistant glass fibres and carbon fibres for textile reinforced concrete II : Water adsorption and composite interphases" 69 : 905-912, 2009

14 Scheffler, C., "Interphase modification of alkali-resistant glass fibres and carbon fibres for textile reinforced concrete I : Fibre properties and durability" 69 : 531-538, 2009

15 Triantafillou, T. C., "Innovative structural and energy retrofitting system for masonry walls using textile reinforced mortars combined with thermal insulation: In-plane mechanical behavior" 22 : 04018029-, 2018

16 Orosz, K., "From material level to structural use of mineral-based composites—an overview" 2010 : 1-19, 2010

17 Dalalbashi, A., "Fiber-to-mortar bond behavior in TRM composites : Effect of embedded length and fiber configuration" 152 : 43-57, 2018

18 De Felice, G., "Experimental characterization of composite-to-brick masonry shear bond" 49 : 2581-2596, 2016

19 Larrinaga, P., "Experimental and numerical modeling of basalt textile reinforced mortar behavior under uniaxial tensile stress" 55 : 66-74, 2014

20 Caggegi, C., "Experimental analysis on tensile and bond properties of PBO and aramid fabric reinforced cementitious matrix for strengthening masonry structures" 127 : 175-195, 2017

21 Butler, M., "Durability of textile reinforced concrete made with AR glass fibre : Effect of the matrix composition" 43 : 1351-1368, 2010

22 "D3039/D3039M-17 Standard test method for tensile properties of polymer matrix composite materials. Standard test method for tensile properties of polymer matrix composite materials"

23 D’antino, T., "Comparison between different tensile test set-ups for the mechanical characterization of inorganic-matrix composites" 171 : 140-151, 2018

24 Jiang, J., "Bond behavior of basalt textile meshes in ultra-high ductility cementitious composites" 174 : 107022-, 2019

25 Triantafillou, T. C., "An innovative structural and energy retrofitting system for URM walls using textile reinforced mortars combined with thermal insulation : Mechanical and fire behavior" 133 : 1-13, 2017

26 Krishnamurthy, B. S., "An experimental work on alkaline resistance glass fiber reinforced concrete" 3 : 730-737, 2017

27 "Ac434 I. Acceptance criteria for masonry and concrete strengthening using fiber-reinforced cementitious matrix (FRCM) composite systems"

28 "ACI Committee 549. 549.4R-13 Guide to design and construction of externally bonded Fabric-Reinforced Cementitious Matrix (FRCM)systems for repair and strengthening concrete and masonry structures" American Concrete Institute

29 Ascione, L., "A qualification method for externally bonded Fibre Reinforced Cementitious Matrix(FRCM)strengthening systems" 78 : 497-506, 2015

30 Uni, E, "1015-11: 2019. Methods of test for mortar for masonry-Part 11"