TiZrN 코팅의 레이저 침탄에서 탄소 포텐셜에 따른 침입 거동 = Penetration behavior by carbon potential in laser-carburized TiZrN coatings

국문 초록 (Abstract)

Laser-carburized TiZrN 코팅의 침탄 공정에서 탄소 페이스트 두께에 따른 탄소의 침투 깊이 및 압축잔류응력 변화를 탄소 포텐셜 측면으로 비교·고찰하였다. 스크린 프린팅과 스핀 코팅 방법을 이용하여 각각 1.1 mm와 0.4 mm의 두께로 탄소 페이스트를 도포하고, 동일한 레이저 조사 조건에서 레이저 침탄을 실시하였다. 탄소 페이스트가 두꺼워질수록 침탄된 TiZrN 시료의 회절 패턴이 더 저각으로 이동하였으며, 고용체 강화 및 격자 왜곡의 심화를 나타내었다. TEM을 이용한 미세구조 분석에서도 두꺼운 페이스트로부터 침탄된 TiZrN 내 결정질 결함이 증가하고 높은 탄소 농도를 보였으며, 이는 페이스트 두께가 두꺼워질수록 탄소 포텐셜도 높아짐을 의미하였다. XPS depth profile 분석에서도 두꺼운 페이스트를 통해 침탄된 TiZrN 시료에서 높은 탄소 농도 및 탄화물 형성을 보이면서, 탄소 페이스트 두께 조절에 의해 침탄에서 표면 탄소농도와 탄소 포텐셜 증가가 일어남을 나타내었다. 아울러, 탄소 농도의 증가는 표면의 압축잔류응력 증가(3.67 GPa에서 4.58 GPa로)에 기여하였음을 확인하였다.

다국어 초록 (Multilingual Abstract)

Penetration depth and compressive residual stress of laser-carburized TiZrN coating by thickness of carbon paste were investigated in terms of carbon potential. The carbon paste was covered with a thickness of 1.1 mm using screen printing, and applied to a thickness of 0.4 mm using spin coating, and laser carburization was performed under the same conditions. As the thickness of carbon paste increased, the diffraction pattern of the laser-carburized TiZrN coating shifted to a lower angle, indicating solid solution strengthening and lattice distortion. For microstructure analysis using TEM, the defects and carbon concentration of the laser-carburized TiZrN coating increased as the carbon paste was thicker. It indicated that the variation of the carbon potential corresponds to the change in the paste thickness. In XPS depth profile analysis, high concentration of carbon and formation of carbide were observed in laser-carburized TiZrN coating with thick carbon paste. It revealed that the carbon concentration on the surface and carbon potential were changed by the thickness control of carbon paste. The compressive residual stress increased from 3.67 GPa to 4.58 GPa by the variation of carbon concentration.

참고문헌 (Reference)

1 조현, "표면 처리에 따른 Inconel 617 합금의 고온 특성" 한국결정성장학회 19 (19): 298-304, 2009

2 이성철, "레이저 침탄에서 페이스트 증착방식에 따른 TiZrN 코팅의 carbon solid solubility" 한국결정성장학회 30 (30): 7-11, 2020

3 유현조, "레이저 침탄된 TiZrN 코팅에서 탄소확산거동과 기계적 특성" 한국결정성장학회 31 (31): 32-36, 2021

4 E. L. Dalibon, "Wear resistance of nitrided and DLC coated PH stainless steel" 255 : 22-, 2014

5 E. Santecchia, "Wear resistance investigation of titanium nitride-based coatings" 41 : 10349-, 2015

6 M. Ebrahimi, "Wear behavior of DLC film on plasma nitrocarburized AISI 4140 steel by pulsed DC PACVD : effect of nitrocarburizing temperature" 52 : 32-, 2015

7 J. Dean, "Use of nanoindentation to measure residual stresses in surface layers" 59 : 2749-, 2011

8 M. T. Hernández-Sierra, "Tribological performance of TiN and TiCN coatings on a working tool steel" 대한기계학회 32 (32): 3659-3666, 2018

9 최병수, "TiZrN 박막의 조성이 구조적 특성 및 열적 특성에 미치는 영향" 한국결정성장학회 31 (31): 37-42, 2021

10 이병우, "TiCrN 코팅이 Inconel 617 합금의 고온안정성에 미치는 영향" 한국결정성장학회 21 (21): 235-239, 2011

11 T. Kim, "Test method for degradation of TiZrN coatings on metal substrate using electrical resistance measurement" 45 : 22368-, 2019

12 A. F. Saleh, "Surface carburizing of Ti-6Al-4V alloy by laser melting" 48 : 257-, 2010

13 B. Courant, "Structure and hardness of titanium surfaces carburized by pulsed laser melting with graphite addition" 160 : 374-, 2005

14 K. Bouamama, "Structural and elastic properties of single-crystal and polycrystalline Ti1xZrxN alloys: A computational study" 536 : S138-, 2012

15 I. A. Bataev, "Non-vacuum electron-beam carburizing and surface hardening of mild steel" 322 : 6-, 2014

16 J. Yao, "Microstructure and wear property of carbon nanotube carburizing carbon steel by laser surface remelting" 254 : 7092-, 2008

17 S. Datta, "Mechanical, wear, corrosion and biological properties of arc deposited titanium nitride coatings" 344 : 214-, 2018

18 I. Campos, "Effect of boron paste thickness on the growth kinetics of Fe2B boride layers during the boriding process" 243 : 429-, 2005

19 Y. W. Lin, "Effect of bias on the structure and properties of TiZrN thin films deposited by unbalanced magnetron sputtering" 618 : 13-, 2016

20 O. K. Rowan, "Effect of alloy composition on carburizing performance of steel" 30 : 235-, 2009

21 Y. W. Lin, "Effect of Ti interlayer thickness on mechanical properties and wear resistance of TiZrN coatings on AISI D2 steel" 394 : 125690-, 2020

22 V.S. Sundaram, "Diamond like carbon film as a protective coating for high strength steel and titanium alloy" 201 : 2707-, 2006

23 Z. Li, "Designing superhard, self-toughening CrAlN coatings through grain boundary engineering" 60 : 5735-, 2012

24 Y. K. Choi, "Crack propagation behavior of TiN coatings by laser thermal shock experiments" 258 : 8752-, 2012

25 C. A. Escobar, "Corrosion resistant surface for vanadium nitride and hafnium nitride layers as function of grain size" 75 : 23-, 2014

26 H. C. Man, "Adhesion study of pulsed laser deposited hydroxyapatite coating on laser surface nitrided titanium" 517 : 5496-, 2009