각형강관 T형 접합부의 휨거동에 관한 실험 연구 = An Experimental Study on the Flexural Behavior for T-joints with Square Hollow Structural Sections

국문 초록 (Abstract)

비렌딜 트러스가 면내 휨모멘트 하중을 받는 지관 정방형의 각형강관 T형 접합부의 거동을 실험적으로 조사하기 위한 것이 본 논문의 목적이다. T형 접합부에서 각형강관 주관 플랜지면의 위에 각형강관 지관이 용접으로 접합되어 있다. 주요 변수로는 주관 두께에 대한 폭의 비($2{\gamma}$)로 ${16.7{\leq}2{\gamma}{\leq}33.3}$의 범위이고, 주관 폭에 대한 지관 폭의 비인 폭비($\beta$)로 ${0.40{\leq}{\beta}{\leq}0.71}$이다. 접합부에 면내 휨모멘트 하중이 작용하도록 총 9개의 실험체를 제작하여 실험하였다. 실험결과, 각형강관 지관 정방형의 T형 접합부에 대한 면내 휨강도는 주관 폭두께비와 폭비에 관계없이 주관 플랜지 휨변형에 의해 결정됨을 알 수 있다. 또한, 지관 정방형의 각형강관 T형 접합부의 면내 휨강도는 사용성에 의해 지배되는 것으로 나타나 면내 최대 휨강도는 1%B 변형시의 휨강도($M_{1%B}$)에 1.5배로 평가할 수 있는 것을 알 수 있다. 최종적으로 지관 정방형의 각형강관 T형 접합부에 대한 면내 휨강도는 주관의 폭두께비가 작을수록, 주관 폭에 대한 지관 폭의 비인 폭비가 클수록 접합부의 휨강도는 선형으로 증가하는 것으로 나타났다.

다국어 초록 (Multilingual Abstract)

The purpose of the study described in this paper was to experimentally investigate branch squared T joints with cold formed hollow structural sections under the in plane moment in a Vierendeel Truss. The branch in the T joints was welded to the upper flange of the chord. The main experimental parameters were the ratio of the width to the thickness of the chord ($2{\gamma}$), with ${16.7{\leq}2{\gamma}{\leq}33.3}$, and the width ratio of the branch to the chord ($\beta$), with ${0.40{\leq}{\beta}{\leq}0.71}$. Nine specimens were tested and manufactured in joints under the in plane bending moment. Based on the results of the test, the in plane moment strength of the branch squared T joints was determined according to the bending deformation of the chord flange yielding, regardless of the ratio of the width to the thickness of the chord and the ratio of the width of the branch to the width of the chord. Also, the in plane moment strength of the branch squared T joints in the hollow structural sections can be defined as 1.5 times the moment load at M1%B the strength of the joints that governed the serviceability in the control group. Finally, the experimental results with the branch squared T joints show that the in lane moment strength of the joint increased as $2{\gamma}$ decreased and $\beta$ increased.

참고문헌 (Reference)

1 대한건축학회, "냉간성형강 구조설계기준 및 해설"

2 대한건축학회, "강구조한계상태 설계기준 및 해설"

3 한국강구조학회, "강구조의 설계" 구미서관 2009

4 박금성, "각형강관 트러스의 T형 및 N형 접합부 최대강도에 관한 연구" 한양대학교 대학원 2006

5 Cute D., "Welded connections for square and rectangular structural steel tubing" Drexel Institute of Technology 1968

6 Brodka J., "Ultimate Load of X and T-Joints in Rectangular Hollow Sections for ξ=1" International Institute of Welding Polish Delegation 1980

7 CIDECT, "The strength and behavior of statically loaded welded connections in structural hollow sections" 1986

8 AISC, "Specification for the Design of Steel Hollow Structural Sections" American Institute of Steel Construction 1997

9 Zhao X. L., "Plastic mechanism analysis of welded thin-walled T-joints made up of circular braces and square chords under in-plane bending" 42 : 759-783, 2004

10 Duff G., "Joint behavior of a welded beam-column connection in rectangular hollow section" The college of Aeronautics, Cranfield 1963

11 Packer J.A., "Hollow structural section connections and trusses-a design guide, 2nd ed" Canadian Institute of Steel Construction 1997

12 Wardenier J., "Hollow Section Joints" Delft University Press 1982

13 International Institute of Welding(IIW), "Design recommendations for hollow section jointspredominantly statically loaded, IIW Doc. XV-701- 89, 2nd ed" IIW Subcommission XV-E 1989

14 EC3, "Design of steel structures, Eurocode 3 Part 1.8 : Design of joints, prEN1993-1-8" European Committee for Standardization (CEN) 1993

15 Jubb JEM, "Design of joints to box sections" Institution of Structural Engineers 1966

16 CIDECT, "Design Guide for Rectangular Hollow Section Joints Under Predominantly Static Loading" 1994

17 Lu L.H., "Deformation limit for the ultimate strength of hollow section joints, Tubular Structure Ⅵ" Balkema 341-347, 1994

18 Zhao X. L., "Deformation limit and ultimate strength of welded T-joints in cold-formed RHS sections" Elsevier Science Ltd. 53 : 149-165, 2000