Performance Evaluation and Shear Resistance of Modular Prefabricated Two-Side Connected Composite Shear Walls

다국어 초록 (Multilingual Abstract)

This paper investigates the impact of configuration parameters on the seismic performance of the modular prefabricated two-side connected composite shear wall. Firstly, the finite element model of the modular prefabricated two-side connected composite shear wall was established and validated by Xu’s experimental results. Secondly, three aspects of parameter investigationswere discussed in detail based on the validated numerical technology, namely the design parameter of ISP, design parameter of the stud, and design parameter of reinforced concrete faceplate (RCF). Then, the computation formula of shear capacity is deduced on the basis of the finite element model for reference to structural design. The results of parameter analysis displayed that the seismic performance of the modular prefabricated two-side connected composite shear wall has excellent seismic performance with the array studs of the length-diameter ratio of 4 which the center distance of 150 mm, and RCF with the thickness of 75 mm. A satisfactory but unadventurous estimation of the shear capacity of a modular prefabricated two-side connected composite shear wall is supplied by the advised technique.

참고문헌 (Reference)

1 Smith GM, "Ultimate flexural analysis based on stressstrain curves of cylinders" 53 : 597-609, 1956

2 Dan D, "Theoretical and experimental study on composite steel-concrete shear walls with vertical steel-encased profiles" 67 : 800-813, 2011

3 Chen Y, "The response characteristics of a buried pipeline under moving the constant load of vehicles" 4 : 421-425, 2015

4 Guo YL, "Test and analysis on hysteretic behavior of bucking-restrained steel plate shear wall" 30 : 31-47, 2009

5 Xu YZ, "Study on the seismic performance of two side connection precast buckling restrained steel plate shear wall connected to beam only" Guangzhou University 2018

6 Yang YB, "Study on seismic performance of shear wall with concrete filled round steel tube columns" 27 : 78-82, 2011

7 Gan CJ, "Study on seismic behavior of steel plate reinforced concrete shear walls" 30 : 89-96, 2009

8 Amir A, "Steel-concrete composite shear walls using precast high-performance fiber reinforced concrete panel" 28 (28): 2019

9 Vian D, "Steel plate shear walls for seismic design and retrofit of building structures" The Multidisciplinary Center for Earthquake Engineering Research, State University of New York 2005

10 "Specification for the seismic test of building. JGJ/T 101-2015"

11 Clubley SK, "Shear strength of steel-concretesteel composite panels : Part I-testing and numerical modeling" 59 : 781-794, 2003

12 Roberts TM, "Seismic resistance of steel plate shear walls" 17 : 344-351, 1995

13 Wang B, "Seismic performance of steel platereinforced concrete composite shear wall" 2012

14 Wu YT, "Seismic performance of steel and concrete composite shear walls with embedded steel truss for use in high-rise buildings" 125 : 39-53, 2016

15 Zhou Y, "Seismic behavior of composite shear walls with multi embedded steel sections, Part I : Experiment" 19 : 618-636, 2010

16 Han QH, "Seismic behavior of buckling-restrained steel plate shear wall with assembled multi-RC panels" 157 : 397-413, 2019

17 Haixia Zhang, "Seismic Performance of Encased Steel Plate-Reinforced Gangue Concrete Composite Shear Walls" 대한토목학회 23 (23): 2919-2932, 2019

18 조성국, "Seismic Capacity Estimation of Steel Plate Concrete (SC) Shear Wall Specimens by Nonlinear Static Analyses" 대한토목학회 19 (19): 698-709, 2015

19 Lee YW, "Quick fracture calibration for industrial use" Massachusetts Institute of Technology 2004

20 Osgood WR, "Plastic bending" 1944

21 Zhang J, "Parameters verification of concrete damaged plastic model of ABAQUS" 38 : 127-130, 2008

22 Ali Kaveh, "Optimal Seismic Design of Reinforced Concrete Shear Wall-Frame Structures" 대한토목학회 18 (18): 2181-2190, 2014

23 Bao YB, "On fracture locus in the equivalent strain and stress triaxility space" 46 : 81-89, 2004

24 Dan D, "Nonlinear behavior of composite shear walls with vertical steel-encased profiles" 33 : 794-804, 2011

25 Popovics S, "Mechanical behavior of materials" 3 : 172-183, 1972

26 Yip WK, "Generic form of stress-strain equation for concrete" 28 : 499-508, 1998

27 Rabbat BG, "Friction coefficient of steel on concrete or grout" 111 : 5-15, 1985

28 Epackachi S, "Finite element modeling of steel-plate concrete composite wall piers" 100 : 369-384, 2015

29 Yu T, "Finite element modeling of confined concrete-II : Plastic-damage model" 32 : 680-691, 2010

30 Genikomsou AS, "Finite element analysis of punching shear of concrete slabs using damaged plasticity model in ABAQUS" 98 : 38-48, 2015

31 Han QH, "Experimental study on the seismic behavior of composite steel plate shear wall with the assembled multi-concrete slab" 37 : 193-200, 2017

32 Wang W, "Experimental study on seismic behavior of steel plate reinforced concrete composite shear wall" 160 : 281-292, 2018

33 Hao TY, "Experimental study on embedded steel plate-concrete composite shear walls with various configurations under axial compression" 37 : 20-28, 2016

34 Wang DY, "Experimental and analytical study of composite steel plate shear wall with the assembled multiconcrete slab" 35 : 83-93, 2017

35 Zhou TY, "Damage analysis of steel frames under cyclic load based on stress triaxiality" 31 : 146-155, 2014

36 Ji XD, "Cyclic shear behavior of composite walls with encased steel braces" 127 : 117-128, 2016

37 Zhao QH, "Cyclic behavior of traditional and innovative composite shear walls" 130 : 271-, 2004

38 Zhao QH, "Cyclic analyses of corrugated steel plate shear walls" 26 : 1351-, 2017

39 Emori K, "Compressive and shear strength of concrete-filled steel box wall" 68 : 29-40, 2002

40 O. Haddad, "Characterizing the Cyclic Behavior of Stiffened SPSWs" 대한토목학회 23 (23): 1691-1706, 2019

41 Wright H, "Axial and bending behavior of composite walls" 124 : 758-764, 1998

42 Cao WL, "Aseismic research of composite shear wall and core walls with rectangular concrete filled steel tube columns" 25 : 58-70, 2008

43 Yu HL, "Application of a stress triaxility dependent fracture criterion in the finite element analysis of unnotched charpy specimens" 54 : 54-62, 2010

44 "Abaqus 6.12, Abaqus/CAE user’s manual"

45 Popovics S, "A numerical approach to the complete stress-strain curve of concrete" 3 : 583-599, 1973