흐름자국이 없는 PP 복합소재 제조를 위한 유변학적 특성 연구 = A Study on Rheological Properties for Preparing Flow Mark Free PP Compounds

국문 초록 (Abstract)

사출성형 시 흐름자국이 생기지 않는 흐름성이 향상된 PP(Polypropylene) 복합재료를 제조하기 위한 연구를 진행하였다. PP는 분자량 분포와 용융지수(MI)가 다른 4종류의 PP를 사용하였으며, PP, 탈크, 고무와 약간의 첨가제로 구성된 PP컴파운드의 유변학적 특성은 Spiral Flow(SF), MI, 전단점도를 측정함으로써 평가하였다. 분자량 분포가 넓은 PP를 사용한 경우 MI가 상대적으로 낮다 하더라도 SF는 MI가 높은 PP보다 높게 관찰되는 경우도 있었다. 사출성형시 표면에 흐름자국이 발생하지 않도록 하기 위해서는 분자량 분포가 넓은 PP를 사용하는 것이 바람직함을 확인하였다.

다국어 초록 (Multilingual Abstract)

Our objective is to increase the flowability of Polypropylene(PP) compounds and achieve flow mark free surface in injection molded specimen. We have investigated flowabilities of PP compounds which were composed of PP, rubber, talc, and trace amount of additives. Flowability measurement was performed with four types PPs of which molecular weight distributions(MWD) and melt indexes(MI) were different. Rheological properties of the PP compounding materials, such as spiral flow(SF) length, MI, and shear viscosity, were evaluated. When PP with the broad MWD was used, there were remarkable cases where the spiral flow length of low MI PP compound was longer than that of higher MI PP compound. The PP compound having low MI but broad MWD PP has more flowability than the compound with only high MI.

참고문헌 (Reference)

1 김효갑, "폴리(에틸렌 나프탈레이트)/폴리(부틸렌 테레프탈레이트) 블렌드 물성 고찰" 한국고분자학회 30 (30): 23-27, 2006

2 J. O. Park, "otational Rheometry for Polymeric Materials (Ⅰ):Basic Concepts in Rheology" 5 : 275-, 1994

3 Denac M, "he influence of thermoplastic elastomers on morphological and mechanical properties of PP/talc composites" 49 : 55-, 1999

4 M. Denac, "The Influence of Thermoplastic elastomers on Morphological and Mechanical Properties of PP/Talc Composites" 46 : 55-, 1999

5 K. J. Kim, "The Characteristics of Polypropylene Resins" 4 : 89-, 1993

6 K. Hirano, "Striped-Pattern Deterioration and Morphological Analysis of Injection Molding Comprising Polypropylene/Ethylene–α-Olefin Rubber Blends. II. Influence of Heating" 108 : 76-, 2008

7 S. Maeda, "Relationship between Surface Appreance and Rheological Properties of Injection Molding of Polypropylene/Rubber/Talc Blends" 35 : 273-, 2007

8 S. G. Lyu, "Properties of Polypropylene/ CaCO3 Composites from the Shape of Calcium Carbonate" 8 : 771-, 1997

9 Van der Wal A, "Polypropylenerubber blends: 1. The effect of the matrix properties on the impact behaviour" 39 : 6781-, 1998

10 Taranco J, "Polypropylene/ talc composites: interfacial modifications by surface treatments on the solid particles" 13 : 287-, 1994

11 Premphet K., "Phase structure of ternary polypropylene /elastomer/filler composites: effect of elastomer polarity" 41 : 9283-, 2000

12 J. Karger‐Kocsis, "Phase structure of impact‐modified polypropylene blends" 25 : 279-, 1984

13 C. H. HONG, "POLYPROPYLENE/CLAY NANOCOMPOSITES FOR AUTOMOTIVE APPLICATIONS" 한국자동차공학회 6 (6): 665-670, 2005

14 K. Hirano, "Morphological Analysis of the Tiger Stripe on Injection Molding of Polypropylene/ Ethylene-Propylene Rubber/Talc Blends Dependent on Based Polypropylene Design" 104 : 192-, 2007

15 F. Martinatti, "High‐rate J‐testing of thoughened Polypropylene" 29 : 442-, 1994

16 Wypych G, "Handbook of fillers. 2nd ed" Chem Tec Publishing 395-, 1999

17 S. Maeda, "Flow Mark in the Injection Molding of Polypropylene/Rubber/Talc Blends" 35 : 293-, 2007

18 Naiki M, "Effect of talc on the crystallization of isotactic polypropylene" 79 : 1693-, 2001

19 K. S. Park, "Effect of Molecular Weight and Rheological Properties on the Cross‐sectional Charateristics of Polypropylene Hollow Fiber" 37 : 311-, 2000

20 Pukanszky B, "Composition dependence of the fracture toughness of heterogeneus polymer systems" 36 : 1617-, 1995

21 Kansai Research Institute Multiclient, "Advanced Materials‐Phase Ⅷ" 1997