RISS 검색 - 국내학술지논문 상세보기

다국어 초록 (Multilingual Abstract)

PURPOSE. The objective of this study was to evaluate the clinical acceptability of all-ceramic crowns fabricated by the digital veneering method vis-à-vis the traditional method. MATERIALS AND METHODS. Zirconia specimens manufactures by two different manufacturing method, conventional vs digital veneering, with three different thickness (0.3 mm, 0.5 mm, 0.7 mm) were prepared for analysis. Color measurement was performed using a spectrophotometer for the prepared specimens. The differences in shade in relation to the build-upmethod were calculated by quantifying ΔE* (mean color difference), with the use of color difference equations representing the distance from the measured values L*, a*, and b*, to the three-dimensional space of two colors. Two-way analysis of variance (ANOVA) combined with a Tukey multiple-range test was used to analyze the data (α=0.05). RESULTS. In comparing means and standard deviations of L*, a*, and b* color values there was no significant difference by the manufacturing method and zirconia core thickness according to a two-way ANOVA. The color differences between two manufacturing methods were in a clinically acceptable range less than or equal to 3.7 in all the specimens. CONCLUSION. Based on the results of this study, a carefully consideration is necessary while selecting upper porcelain materials, even if it is performed on a small scale. However, because the color reproducibility of the digital veneering system was within the clinically acceptable range when comparing with conventional layering system, it was possible to estimate the possibility of successful aesthetic prostheses in the latest technology.

참고문헌 (Reference)

1 Dozić A., "The influence of porcelain layer thickness on the final shade of ceramic restorations" 90 : 563-570, 2003

2 Guazzato M., "Strength, fracture toughness and microstructure of a selection of allceramic materials. Part II. Zirconia-based dental ceramics" 20 : 449-456, 2004

3 Seghi RR., "Spectrophotometric analysis of color differences between porcelain systems" 56 : 35-40, 1986

4 O'Brien WJ., "Sources of color variation on firing porcelain" 7 : 170-173, 1991

5 Heffernan MJ., "Relative translucency of six all-ceramic systems. Part I : core materials" 88 : 4-9, 2002

6 Douglas RD., "Predicting porcelain thickness required for dental shade matches" 82 : 143-149, 1999

7 Hochman N., "New all-ceramic indirect post-andcore system" 81 : 625-629, 1999

8 Lee YK., "Layered color of all-ceramic core and veneer ceramics" 97 : 279-286, 2007

9 Douglas RD., "Intraoral determination of the tolerance of dentists for perceptibility and acceptability of shade mismatch" 97 : 200-208, 2007

10 Braga RR., "Influence of time and adhesive system on the extrusion shear strength between feldspathic porcelain and bovine dentin" 16 : 303-310, 2000