High-frequency induction heated sintering of nanostructured WC and WC-TiAl3 hard materials their mechanical properties

다국어 초록 (Multilingual Abstract)

Tungsten carbides are primarily used as cutting tools and abrasive materials in the form of composites with a binder metal,such as Co or Ni. However, these binder phases have low corrosion resistance compared to the carbide phase and the high costof Ni or Co. Therefore, the drawbacks of the WC-Ni and WC-Co cermets have generated interest in recent years foralternative binder phases. In this study, TiAl3 was used as a novel binder and consolidated by the high-frequency inductionheated sintering (HFIHS) method. The advantage of this process is not only rapid densification to near theoretical density butalso the prohibition of grain growth in nano-structured materials. Highly dense WC-TiAl3 with a relative density of up to98% was obtained within one min by HFIHS under a pressure of 80 MPa. The microstructure and the mechanical properties(hardness and fracture toughness) of the sintered WC and WC-TiAl3 were investigated.

참고문헌 (Reference)

1 K. Niihara, 1 : 12-16, 1982

2 In-Jin Shon, 35 : 339-344, 2009

3 GS Upadhyaya, 22 : 483-489, 2001

4 S. Imasato, 13 : 305-312, 1995

5 G. Gille, 18 (18): 87-102, 2000

6 Hua Lin, 41 : 363-365, 2013

7 Z. G. Zhang, 48 : 741-765, 2006

8 J. E. Garay, 85 : 573-575, 2004

9 GE Fougere, 26 (26): 1879-1883, 1992

10 M. Sherif El-Eskandarany, 305 : 225-238, 2000

11 L Fu, 44 : 1061-1068, 2001

12 Z. Fang, 13 : 297-303, 1995

13 A. I. Y. Tok, 383 : 229-234, 2004

14 J. Jung, 56 : 561-564, 2007

15 강보람, "펄스전류활성 가열에 의한 나노구조의 4Cr-3ZrO2 복합재료 급속소결과 특성" 대한금속·재료학회 53 (53): 320-325, 2015

16 손인진, "펄스전류 활성 소결에 관한 연구" 대한금속·재료학회 52 (52): 573-580, 2014

17 권소망, "나노구조의 Ti-TiC 복합재료 소결 및 기계적 성질" 대한금속·재료학회 53 (53): 555-562, 2015

18 손인진, "나노구조 TiC-FeAl 초경재료의 기계적 성질" 대한금속·재료학회 53 (53): 474-479, 2015

19 강현수, "나노구조 MgAl2O4-Mg3Al2Si3O12 복합재료 합성과 동시 소결 및 기계적 성질" 대한금속·재료학회 52 (52): 777-782, 2014

20 강현수, "나노구조 (Mo,W)Si2 급속소결과 기계적 특성" 대한금속·재료학회 52 (52): 623-629, 2014

21 Suryanarayana C., "X-ray Diffraction A Practical Approach" Plenum Press 1998

22 Z. Shen, "Spark plasma sintering of alumina" 85 : 1921-1927, 2002

23 강현수, "Simultaneously Rapid Synthesis and Consolidation of Nanostructured Mg0.3Al1.4Ti1.3O5 by High-Frequency Induction Heating" 대한금속·재료학회 10 (10): 529-533, 2014

24 Hwan-Cheol Kim, "Rapid Sintering of Ultra Fine WC and WC-Co Hard Materials by High-Frequency Induction Heated Sintering and Their Mechanical Properties" 대한금속·재료학회 13 (13): 39-45, 2007

25 손인진, "Pulsed Current Activated Synthesis and Rapid Consolidation of a Nanostructured Mg2Al4Si5O18 and Its Mechanical Properties" 대한금속·재료학회 21 (21): 345-349, 2015

26 H Gleiter, "Nanocrystalline materials" 33 (33): 223-315, 1989

27 손인진, "Mechanochemical Synthesis and Rapid Consolidation of Binderless Nanostructured (Ti,V)C by Pulsed Current Activated Heating and Its Mechanical Properties" 대한금속·재료학회 52 (52): 343-346, 2014

28 강보람, "Mechanical Properties and Rapid Low-temperature Consolidation of Nanocrystalline Cu-ZrO2 Composites by Pulsed Current Activated Heating" 대한금속·재료학회 21 (21): 698-703, 2015

29 곽봉원, "Enhanced mechanical properties of nanostructured TiSi2-NbSi2 composite rapidly sintered by pulsed current activated heating" 세라믹공정연구센터 16 (16): 340-345, 2015

30 손인진, "Effect of Milling on Properties and Consolidation of AlN by High-Frequency Induction Heated Sintering" 대한금속·재료학회 10 (10): 337-343, 2014

31 H. Suzuki, "Cemented Carbide and Sintered Hard Materials" Maruzen 262-268, 1986