고성능 하이브리드 섬유보강 콘크리트의 압축 및 인장 거동

국문 초록 (Abstract)

이 연구의 목적은 비정질 강섬유와 폴리아미드 섬유를 이용한 고성능 하이브리드 섬유보강 콘크리트의 압축 및 인장 거동을 평가하는 것이다. 이를 위하여 목표 압축강도 40MPa 및 60MPa 각각에 대해서 비정질 강섬유와 폴리아미드 섬유를 총 부피비로 1.0% 혼입한 고성능 하이브리드 섬유보강 콘크리트를 제작한 후 압축강도, 압축인성, 직접인장강도 및 응력-변형률 특징 등의 압축 및 인장 거동을 평가하였다. 그 결과, 고성능 하이브리드 섬유보강 콘크리트의 압축강도는 플레인 콘크리크보다 다소 감소하였으나, 압축인성, 압축인성 비, 직접인장강도는 크게 증가하는 것으로 나타났다. 또한 압축 및 인장 시험시 플레인 콘크리트는 최대응력 이후 취성파괴를 나타냈으나, HPHFRC는 변형연화 현상을 나타내어, 압축 및 인장 거동이 크게 개선되는 것으로 나타났다.

다국어 초록 (Multilingual Abstract)

The purpose of this experimental research is to evaluate the compressive and tensile behaviors of high performance hybrid fiber reinforced concrete(HPHFRC) using amorphous steel fiber(ASF) and polyamide fiber(PAF). For this purpose, the HPHFRCs using ASF and PAF were made according to their total volume fraction of 1.0% for target compressive strength of 40MPa and 60MPa, respectively. And then the compressive and tensile behaviors such as the compressive strength, compressive toughness, direct tensile strength, and stress-strain characteristics under compressive and tensile tests were estimated. It was observed from the test results that the compressive strength of HPHFRC was slightly decreased than that of plain concrete, but the compressive toughness, compressive toughness ratio, and direct tensile strength of HPHFRC increased significantly. Also, it was revealed that the plain concrete showed brittle fracture after the maximum stress from the stress-strain curves, but HPHFRC showed strain softening.

목차 (Table of Contents)

• 1. 서론
• 2. 실험개요
• 3. 실험결과 및 고찰
• 4. 결론
• References

참고문헌 (Reference)

1 구동오, "비정질 강섬유보강콘크리트의 휨성능 특성" 한국콘크리트학회 26 (26): 483-489, 2014

2 장석준, "고강도 철근과 변형경화형 시멘트복합체를 사용한 보의 균열거동 및 휨 성능" 한국콘크리트학회 27 (27): 37-44, 2015

3 Nataraja, M. C., "Stress-strain curves for steel-fiber reinforced concrete under compression" 21 : 383-390, 1999

4 Strong, A. B., "Plastics : Materials and Processing" PEARSON Prentce Hall 2006

5 Lawer, J. S., "Permeability of cracked hybrid fiber-reinforced under load" 99 (99): 379-385, 2000

6 Won, J. P., "Performance and application of hybrid fiber reinforced concrete" 18 (18): 22-27, 2006

7 Hwang, J.Y., "Microstructure and Soft Magnetic Properties of Fe80P20-xSix (X=4.5-6.5 at.%) Amorphous Alloy" Kyungpook National University 2015

8 Nam, J. S., "Mechanical properties of tunnel shotcrete with polyamide fiber ratio" 22 (22): 163-164, 2010

9 Moon, J. W., "Mechanical Properties, Corrosion Resistance and Thermal Neutron Shielding Efficiency of Fe72-xB25Mo3Crx (x=0, 5, 10, 15, 20) High Boron Amorphous Ribbons" Kyungpook National University 2016

10 "KS F 2405. (2010). Standard Test Method for Compressive Strength of Concrete"

11 "KS F 2403. (2014). Standard Test Method for Making and Curing Concrete Specimens"

12 "JSCE-SF5. (1984). Method of Test for Compressive Strength and Compressive Toughness of Steel Fibre-Reinforced Concrete"

13 Quan, C. X., "Fracture properties of concrete reinforced with steel-polyethylene hybrid fibers" 22 (22): 651-658, 2000

14 Botta, W. J., "Corrosion resistance of Fe-based amorphous alloys" 586 (586): S105-S110, 2014

15 Poon, C. S., "Compressive behavior of fiber reinforced high-performance concrete subjected to elevated temperatures" 34 : 2215-2222, 2004

16 Jeon, J. K., "An experimental study on the flexural characteristics of polyamide fiber reinforced concrete" 26 (26): 379-380, 2014