선삭가공에서의 테이퍼 홈 절삭특성에 관한 연구 = A Study on Cutting Characteristic of Tapered Groove in Turning

다국어 초록 (Multilingual Abstract)

In recently, it is demanded development of manufacturing techniques for machining of various mechanical parts. Therefore the development of turning is one of the important manufacturing techniques. In this study, an experimental shape in tapered groove turning was suggested, and the turning process was investigated by analyzing cutting speed, feed rate, tapered angle, depth of cut. The surface roughness and cutting force change in the workpiece was measured. From the results, the optimum machining conditions are obtained by design of experiments.

목차 (Table of Contents)

• ABSTRACT
• 1. 서론
• 2. 실험장치 및 실험방법
• 3. 실험결과 및 고찰
• 4. 결론
• 참고문헌

참고문헌 (Reference)

1 신동식, "질화규소의 예열선삭가공시 경사각에 따른 절삭특성" 한국정밀공학회 26 (26): 47-54, 2009

2 이문재, "공구와 공작물의 상대적 변형량 예측을 위한 해석모델 개발에 관한 연구" 한국정밀공학회 27 (27): 20-26, 2010

3 Fung, Eric H. K., "The implementation of and error forecasting and compensation system for roundness improvement in taper turning" 35 : 109-120, 1998

4 Yoon, Y. S, "Prediction the Surface Profile in the Single Point Diamend Turning" 11 (11): 189-198, 1994

5 최태규, "Al6061-T6의 선삭가공에서 가공조건에 따른 절삭특성 평가" 한국생산제조시스템학회 18 (18): 675-680, 2009

6 황영국, "Al 6061 MQL 선삭가공에서 절삭력과 표면거칠기 예측에 관한 실험적 연구" 한국정밀공학회 25 (25): 159-167, 2008

7 Eyup, S. T., "A cutting force induced error elimination method for turning operations" 170 : 192-203, 2005

8 Ssengonzi, J. B., "A Study on the Prediction of the Limiting Depth of Cut in Dynamic Cutting of a Tapered Workpiece" 6 (6): 271-281, 1982

9 Cho, G. J, "A Study on the Cutting Characteristic in the Turning using TiAlN Coated Tools" 69-74, 2005

10 Sim, G. J., "A Study on the Classification and Prediction of the Chip Type under the Specified Cutting Conditons in Turning" 12 (12): 53-62, 1995