총의치 제작을 위한 무치악 디지털 모형의 정확도 평가 = Evaluation of Validity of Edentulous Digital Model for Complete Denture Fabrication

다국어 초록 (Multilingual Abstract)

One of the most critical causes in determining the clinical outcomes of dental prostheses is the validity of models. However, studies that evaluated validity of digital models are few. The objectives of this study were to evaluate validity of edentulous digital models for full denture fabrication. Twenty stone models (edentulous model) were manufactured and scanned by dental blue light emitting diode scanner. Twenty digital models were manufactured. Six linear distances (inter-canine distance, inter-molar distance, two dental arch lengths (right, left), two diagonal of dental arch lengths (right, left) were measured for validity evaluation. The measurements of distances of stone models were used by digital vernier caliper and digital models were used by computer program. The mean±deviations values of six distances were calculated. The means were compared by the Mann Whitney U test (?=0.05). All statistical analysis were performed using IBM SPSS Statistics ver. 20.0. Although digital models were smaller than stone models in six distances, there were no significant differences (p＞0.05) and non exceeded the clinical acceptable range. The edentulous digital models for full denture fabrication can be considered clinically acceptable.

참고문헌 (Reference)

1 김재홍, "치과용 캐드캠을 이용하여 연질금속 재료로 제작한 고정성보철물의 변연 간격 평가" 한국치위생과학회 14 (14): 349-355, 2014

2 김기백, "전악의 디지털 인상 채득 시 치과용 모형재가 디지털 모형 정확성에 미치는 영향" 한국치위생과학회 12 (12): 617-623, 2012

3 오상환, "일부 노인층의 틀니, 임플란트 건강보험에 대한 인식도 연구" 한국치위생과학회 14 (14): 502-509, 2014

4 김재홍, "인상 스캐닝 방법에 의해 제작된 디지털 치과 모형의 체적안정성 평가" 한국치위생과학회 14 (14): 15-21, 2014

5 안은숙, "노인의 치과의료서비스 이용에 영향을 미치는 요인" 한국치위생과학회 15 (15): 60-66, 2015

6 Stevens DR, "Validity, reliability, and reproducibility of plaster vs digital study models: comparison of peer assessment rating and Bolton analysis and their constituent measurements" 129 : 794-803, 2006

7 Kawahata N, "Trial of duplication procedure for complete dentures by CAD/CAM" 24 : 540-548, 1997

8 Christensen GJ, "Removable prosthodontics: a forgotten part of dentistry" 99 : 26-28, 2006

9 Zilberman O, "Evaluation of the validity of tooth size and arch width measurements using conventional and three-dimensional virtual orthodontic models" 73 : 301-306, 2003

10 Inokoshi M, "Evaluation of a complete denture trial method applying rapid prototyping" 31 : 40-46, 2012

11 Bidra AS, "Computer-aided technology for fabricating complete dentures: systematic review of historical background, current status, and future perspectives" 109 : 9-361, 2013

12 Santoro M, "Comparison of measurements made on digital and plaster models" 124 : 101-105, 2003

13 Goodacre CJ, "CAD/CAM fabricated complete dentures: concepts and clinical methods of obtaining required morphological data" 107 : 34-46, 2012

14 Miyazaki T, "A review of dental CAD/CAM: current status and future perspectives from 20 years of experience." 28 : 44-56, 2009

15 Creed B, "A comparison of the accuracy of linear measurements obtained from cone beam computerized tomography images and digital models." 17 : 49-56, 2011

16 Maeda Y, "A CAD/CAM system for removable denture. Part I: fabrication of complete dentures" 7 : 17-21, 1994