단일 고전단 링앵커의 전단강도 평가

다국어 초록 (Multilingual Abstract)

The usage of anchors has increased in joints of new and old concretes for the purposes of seismic retrofits, remodeling, strengthening of existing structures, and so on. In most cases, the shear capacities of the anchors are governed by the steel strength of anchor rods. A lot of anchors should be installed to develop full strength of new structures. In this study, high-shear-capacity ring anchors consisting of steel ring and rod were developed and their shear capacities were examined through shear tests with varying beam width, concrete compressive strength, embedment depth of anchor rod, ring shape, epoxy types, and anchor types. For the specimens with the shallow width that is less than 3.33 times of the ring diameter, splitting failures occurred with the side cover concrete spalling. In splitting failure, the shear capacity increased as the specimen width increased. For the specimens with the wide width, the ring anchors failed due to bearing and the width did not affect the shear capacity. The shear capacities of the ring anchors are at least 1.75 times and up to 4.37 times of the shear capacity of the rod anchor. In addition, the ring anchors had higher stiffness and in most cases the maximum capacities were developed at 2 mm or less displacement. The improved stiffness may enhance the usage of the ring anchors for seismic retrofits. The embedment depth also affects the shear capacities of the ring anchors. With an embedment depth of 125 mm, the ring anchors have shear capacities of at least 3.3 times of the shear capacity of the rod anchor. Therefore, the number of anchors can be significantly reduced.

목차 (Table of Contents)

• Abstract
• 1. 서론
• 2. 고전단 링앵커의 구성, 시공, 설계
• 3. 전단 실험 계획
• 4. 전단실험 결과
• 5. 결론
• 참고문헌

참고문헌 (Reference)

1 한국강구조학회, "하중저항계수설계법에 의한 강구조설계기준"

2 한국콘크리트학회, "콘크리트 구조기준․해설" 기문당 599-, 2012

3 "출원 특허, 충전형 앵커 소켓, 10-2014-0038192"

4 정주성, "기존 중저층 R/C 건물의 내진보강을 위한RCSF 외부접합공법 제안" 34 (34): 503-504,

5 三輪　明広, "鋼管をコッターとして用いた耐震補強工法（TO–STC工法）の開発" 30 : 2008

6 石岡拓他, "鋼管をコッターとして用いた耐震補強工法 (TOSTC 工法）の開発　その3　RM ブロック耐震壁" (34) : 2008

7 財團法人 日本建築防災協会, "既存鉄筋コンクリート造建築物の耐震改修設計指針同解説"

8 石村光由, "既存低強度コンクリートRC 建物に対するハイブリッド耐震補強工法の適用に関する実験的研究 その 2 接合部要素実験" 2009

9 藤井稔己, "既存低強度コンクリートRC 建物に対するハイブリッド耐震補強工法の適用に関する実験的研究 その 1 接合部要素の実験計画" 2009

10 財團法人 日本建築防災協會, "外側耐震改修マニュアル"

11 Fuchs, W., "Concrete Capacity Design (CCD) Approach for Fastening to Concrete" 92 (92): 73-94, 1995

12 "ACI Committee 318, Building Code Requirements for Structural Concrete (ACI 318-11) and Commentary"