Analysis of lateral extrusion of gear-like form parts

다국어 초록 (Multilingual Abstract)

The analysis of lateral extrusion process was carried out. A three dimensional FE model was developed to analyze the effects of some important geometrical parameters such as initial billet dimensions, gap height and frictional condition on the required forging load, the material flow pattern and effective plastic strain distribution. The FE code of DEFORM-3D was employed. A series of experimental tests on commercial lead billets were carried out to verify the FE results. The simulation work has been performed by the rigid-plastic FE method. The results obtained using the numerical solutions have been compared with the experimental data for each case study in terms of required forming load and material flow pattern in different regions. Comparison between FE and experiment results showed good agreement. Both the simulation and experimental results highlight the major role of above mentioned parameters on the required forming load and material flow pattern. The results showed that the gap height has the greatest effect on the forming load and material flow. The results presented in this paper could be used as basic data in the design of the lateral extrusion process.

참고문헌 (Reference)

1 B. D. Ko, "The influence of die geometry on the radial extrusion processes" 113 : 109-114, 2001

2 S. K. Hwang, "The forming characteristics of simultaneous radial- forward extrusion processes" 4 : 475-479, 2005

3 Y. S. Lee, "The forming characteristics of radial-forward extrusion" 113 : 136-140, 2001

4 H. -J. Choi, "The forming characteristics of radial-backward extrusion" 113 : 141-147, 2001

5 H. Y. Cho, "Process design of the cold forging of a billet by forward and backward extrusion" 81 : 135-375, 2003

6 M. Zadshakoyan, "Numerical study of the die geometry and friction effect on the forming load and material flow in injection forging process" 9 : 2174-2179, 2009

7 M. Plancak, "Non-conventional cold extrusion" 34 : 465-472, 1992

8 R. Balendra, "Injection forging: engineering and research" 145 : 189-206, 2004

9 R. Balendra, "Identification and classification of flow–dependent defects in the injection forging of solid billets" 106 : 199-203, 2000

10 A. Buschhausen, "Evaluating of lubrication and friction in cold forging using a double backward extrusion process" 33 : 95-108, 1992

11 D. Y. Yang, "Design of processes and products through simulation of three-dimensional extrusion" 191 : 2-6, 2007

12 "DEFORM-3D software user Manual, Scientific Forming technologies Corporation, V5.0, Scientific Forming Technologies Corporation"

13 R. Balendra, "Computer-aided design of Nett-forming by injection forging of engineering components" (76) : 62-68, 1998

14 Y. Can, "Analysis of spur gear forms with tapered tooth profile" 29 : 829-838, 2007

15 A. Farhoumand, "Analysis of forwardbackward- radial extrusion process" 30 : 2152-2157, 2009

16 T. Altinbalik, "An experimental study of lateral extrusion of splines" 27 : 727-734, 2006

17 T. Mizuno, "An experiment on injection upsetting" 96 : 234-239, 1999

18 R. Ebrahimi, "An analytical approach for raial-forward extrusion process" 29 : 1694-1700, 2008

19 Y. Can, "A study of lateral extrusion of gear like elements and splines" 166 : 128-134, 2005

20 R. Ebrahimi, "A new method for evaluation of friction in bulk metal forming" 152 : 136-143, 2004