Enhancing the ability of strain energy release rate criterion for fracture assessment of orthotropic materials under mixed-mode I/II loading considering the effect of crack tip damage zone

다국어 초록 (Multilingual Abstract)

In this study, considering dissipated energy in fracture process zone (FPZ), a novel criterion based on maximum strain energy release rate (SER) for orthotropic materials is presented. General case of in-plane loading for cracks along the fibers is assumed. According to the experimental observations, crack propagation is supposed along the fibers and the reinforcement isotropic solid (RIS) concept is employed as a superior model for orthotropic materials. SER in crack initiation and propagation phases is investigated. Elastic properties of FPZ are extracted as a function of undamaged matrix media and micro-crack density. This criterion meaningfully links between dissipated energy due to toughening mechanisms of FPZ and the macroscopic fracture by defining stress intensity factors of the damaged zone.
These coefficients are used in equations of maximum SER criterion. The effect of crack initiation angle and the damaged zone is considered simultaneously in this criterion and mode II stress intensity factor is extracted in terms of stress intensity factors of damage zone and crack initiation angle. This criterion can evaluate the effects of FPZ on the fracture behavior of orthotropic material. Good agreement between extracted fracture limit curves (FLC’s) and available experimental data proves the ability of the new proposed criterion.

참고문헌 (Reference)

1 Sadra Shahsavar, "Verification of reinforcement isotropic solid model in conjunction with maximum shear stress criterion to anticipate mixed mode I/II fracture of composite materials" Springer Science and Business Media LLC 231 (231): 5105-5124, 2020

2 Marek Romanowicz, "Verification of a non-local stress criterion for mixed mode fracture in wood" Elsevier BV 75 (75): 3141-3160, 2008

3 Mahdi Fakoor, "Verification of a micro-mechanical approach for the investigation of progressive damage in composite laminates" Springer Science and Business Media LLC 230 (230): 225-241, 2018

4 Grzegorz Ludwik Golewski, "Validation of the favorable quantity of fly ash in concrete and analysis of crack propagation and its length – Using the crack tip tracking (CTT) method – In the fracture toughness examinations under Mode II, through digital image correlation" Elsevier BV 296 : 122362-, 2021

5 Griffith, A.A., "VI. The phenomena of rupture and flow in solids" The Royal Society 221 (221): 163-198, 1921

6 Lucas Amaral, "Understanding mixed-mode cyclic fatigue delamination growth in unidirectional composites: An experimental approach" Elsevier BV 180 : 161-178, 2017

7 Mahdi Fakoor, "Transition angle, a novel concept for predicting the failure mode in orthotropic materials" SAGE Publications 227 (227): 2157-2164, 2012

8 Lucas Amaral, "Towards a physics-based relationship for crack growth under different loading modes" Elsevier BV 195 : 222-241, 2018

9 M.Y. Al-Fasih ; A.B.H. Kueh ; S.H. Abo Sabah ; M.Y. Yahya, "Tow waviness and anisotropy effects on Mode II fracture of triaxially woven composite" 국제구조공학회 26 (26): 241-253, 2018

10 Grzegorz Ludwik Golewski, "The influence of microcrack width on the mechanical parameters in concrete with the addition of fly ash: Consideration of technological and ecological benefits" Elsevier BV 197 : 849-861, 2019

11 Grzegorz Golewski, "The Beneficial Effect of the Addition of Fly Ash on Reduction of the Size of Microcracks in the ITZ of Concrete Composites under Dynamic Loading" MDPI AG 14 (14): 668-, 2021

12 Grzegorz Ludwik Golewski, "Studies of Fracture Toughness in Concretes Containing Fly Ash and Silica Fume in the First 28 Days of Curing" MDPI AG 14 (14): 319-, 2021

13 G. C. Sih, "Strain-energy-density factor applied to mixed mode crack problems" Springer Science and Business Media LLC 10 (10): 305-321, 1974

14 Zahra Khaji, "Strain energy release rate in combination with reinforcement isotropic solid model (SERIS): A new mixed-mode I/II criterion to investigate fracture behavior of orthotropic materials" Elsevier BV 113 : 102962-, 2021

15 Hussain, M., "Strain energy release rate for a crack under combined mode I and mode II" 1974

16 Nabi Mehri Khansari, "Probabilistic micromechanical damage model for mixed mode I/II fracture investigation of composite materials" Elsevier BV 99 : 177-193, 2019

17 Ye Zhiming, "Prediction of crack propagation in anisotropic solids" Elsevier BV 49 (49): 797-808, 1994

18 Xiaoxuan Li, "Predicting hydraulic fracture propagation based on maximum energy release rate theory with consideration of T-stress" Elsevier BV 269 : 117337-, 2020

19 Zahra Daneshjoo, "Physics of delamination onset in unidirectional composite laminates under mixed-mode I/II loading" Elsevier BV 211 : 82-98, 2019

20 Grzegorz Ludwik Golewski, "Physical characteristics of concrete, essential in design of fracture‐resistant, dynamically loaded reinforced concrete structures" Hindawi Limited 1 (1): e82-, 2019

21 H. Horii, "Overall moduli of solids with microcracks: Load-induced anisotropy" Elsevier BV 31 (31): 155-171, 1983

22 F. Erdogan, "On the Crack Extension in Plates Under Plane Loading and Transverse Shear" ASME International 85 (85): 519-525, 1963

23 Youzhen Li, "Numerical investigation on dynamic fracture behavior of cracked rocks under mixed mode I/II loading" Elsevier BV 235 : 107176-, 2020

24 Şeref D. Akbaş, "Nonlinear behavior of fiber reinforced cracked composite beams" 국제구조공학회 30 (30): 327-336, 2019

25 Z. Mróz, "Non-local failure and damage evolution rule : Application to a dilatant crack model" EDP Sciences 08 (08): Pr8-257-Pr8-268, 1998

26 Victor I. Rizov, "Non-linear study of mode II delamination fracture in functionally graded beams" 국제구조공학회 23 (23): 263-271, 2017

27 M. Braun, "New lattice models for dynamic fracture problems of anisotropic materials" Elsevier BV 172 : 760-768, 2019

28 D. M. Tan, "Models of wood fracture in Mode I and Mode II" Springer Science and Business Media LLC 53 (53): 159-164, 1995

29 Bertan Beylergil ; Metin Tanoğlu ; Engin Aktaş, "Mode-I fracture toughness of carbon fiber/epoxy composites interleaved by aramid nonwoven veils" 국제구조공학회 31 (31): 113-123, 2019

30 D. G. Hunt, "Mode II fracture toughness of wood measured by a mixed-mode test method" Springer Science and Business Media LLC 1 (1): 77-79, 1982

31 Hiroshi Yoshihara, "Mode II fracture mechanics properties of solid wood measured by the tensile- and compressive-loading shear fracture tests" Elsevier BV 213 : 72-88, 2019

32 Hiroshi Yoshihara, "Mode I fracture toughness estimation of wood by DCB test" Elsevier BV 37 (37): 2105-2113, 2006

33 Mahdi Fakoor, "Mixed-mode I/II fracture criterion for crack initiation assessment of composite materials" Springer Science and Business Media LLC 230 (230): 281-301, 2018

34 Tao Meng, "Mixed mode fracture tests and inversion of FPZ at crack tip of overlying strata in underground coal gasification combustion cavity under real-time high temperature condition" Elsevier BV 239 : 107298-, 2020

35 A.R. Gowhari Anaraki, "Mixed mode fracture criterion for wood based on a reinforcement microcrack damage model" Elsevier BV 527 (527): 7184-7191, 2010

36 Victor E. Saouma, "Mixed mode crack propagation in homogeneous anisotropic solids" Elsevier BV 27 (27): 171-184, 1987

37 Hannaneh Manafi Farid ; Mahdi Fakoor, "Mixed mode I/II fracture criterion to anticipate behavior of the orthotropic materials" 국제구조공학회 34 (34): 671-679, 2020

38 M. Fakoor, "Mixed mode I/II fracture criterion for orthotropic materials based on damage zone properties" Elsevier BV 153 : 407-420, 2016

39 Hannaneh Manafi Farid, "Mixed mode I/II fracture criterion for arbitrary cracks in orthotropic materials considering T-stress effects" Elsevier BV 99 : 147-160, 2019

40 Yang, S., "Kinked crack in anisotropic bodies" 37 (37): 6635-6682, 2000

41 Jinwen Wu, "Investigation of fracture process zone properties of mode I fracture in heat-treated granite through digital image correlation" Elsevier BV 235 : 107192-, 2020

42 Grzegorz Ludwik Golewski, "Improvement of fracture toughness of green concrete as a result of addition of coal fly ash. Characterization of fly ash microstructure" Elsevier BV 134 : 335-346, 2017

43 Bartosz Szostak, "Improvement of Strength Parameters of Cement Matrix with the Addition of Siliceous Fly Ash by Using Nanometric C-S-H Seeds" MDPI AG 13 (13): 6734-, 2020

44 A.R. Gowhari Anaraki, "General mixed mode I/II fracture criterion for wood considering T-stress effects" Elsevier BV 31 (31): 4461-4469, 2010

45 Mahdi Fakoor, "General mixed mode I/II failure criterion for composite materials based on matrix fracture properties" Elsevier BV 96 : 428-442, 2018

46 Lars Olof Jernkvist, "Fracture of wood under mixed mode loading" Elsevier BV 68 (68): 549-563, 2001

47 Lars Olof Jernkvist, "Fracture of wood under mixed mode loading" Elsevier BV 68 (68): 565-576, 2001

48 L. Nobile, "Fracture analysis for orthotropic cracked plates" Elsevier BV 68 (68): 285-293, 2005

49 Fakoor, M., "Failure criterion for mixed mode fracture of cracked wood specimens" World Academy of Science, Engineering and Technology 11 (11): 1364-1370, 2017

50 Mahdi Fakoor, "Experimental and numerical investigation of progressive damage in composite laminates based on continuum damage mechanics" Elsevier BV 70 : 533-543, 2018

51 Grzegorz Ludwik Golewski, "Evaluation of fracture processes under shear with the use of DIC technique in fly ash concrete and accurate measurement of crack path lengths with the use of a new crack tip tracking method" Elsevier BV 181 : 109632-, 2021

52 Tassadit Bellahcene ; Meziane Aberkane, "Estimation of fracture toughness of cast steel container from Charpy impact test data" 국제구조공학회 25 (25): 639-648, 2017

53 Mahdi Fakoor ; Roham Rafiee ; Shahab Zare, "Equivalent reinforcement isotropic model for fracture investigation of orthotropic materials" 국제구조공학회 30 (30): 1-12, 2019

54 Lucas Amaral, "Energy dissipation in mode II fatigue crack growth" Elsevier BV 173 : 41-54, 2017

55 Bernard Budiansky, "Elastic moduli of a cracked solid" Elsevier BV 12 (12): 81-97, 1976

56 Grzegorz Ludwik GOLEWSKI, "Effect of fly ash addition on the fracture toughness of plain concrete at third model of fracture" Vilnius Gediminas Technical University 23 (23): 613-620, 2017

57 Z. Daneshjoo, "Development of a physics-based theory for mixed mode I/II delamination onset in orthotropic laminates" Elsevier BV 103 : 102303-, 2019

58 Grzegorz Ludwik Golewski, "Determination of fracture toughness in concretes containing siliceous fly ash during mode III loading" 국제구조공학회 62 (62): 1-9, 2017

59 Masoud Kharazan ; M.H. Sadr ; Morteza Kiani, "Delamination growth analysis in composite laminates subjected to low velocity impact" 국제구조공학회 17 (17): 387-403, 2014

60 S. Mall, "Criterion for Mixed Mode Fracture in Wood" American Society of Civil Engineers (ASCE) 109 (109): 680-690, 1983

61 E. E. Gdoutos, "Crack growth instability studied by the strain energy density theory" Springer Science and Business Media LLC 82 (82): 1361-1376, 2012

62 K. Arakawa, "Correlations among dynamic stress intensity factor, crack velocity and acceleration in brittle fracture" Springer Science and Business Media LLC 105 (105): 311-320, 2000

63 Bouziane, S., "Computation of energy release rate for interfacial crack in orthotropic bimaterials"

64 Mingqing Yuan, "Comparison of mixed mode fracture criteria in finite element analysis for matrix crack density estimation of laminated composites" SAGE Publications 55 (55): 277-289, 2020

65 N. Dourado, "Comparison of fracture properties of two wood species through cohesive crack simulations" Elsevier BV 39 (39): 415-427, 2008

66 M. Fakoor, "Augmented Strain Energy Release Rate (ASER): A novel approach for investigation of mixed-mode I/II fracture of composite materials" Elsevier BV 179 : 177-189, 2017

67 Zahra Khaji, "Applying the new experimental midpoint concept on strain energy density for fracture assessment of composite materials" Elsevier BV 121 : 103522-, 2022

68 E. M. Wu, "Application of Fracture Mechanics to Anisotropic Plates" ASME International 34 (34): 967-974, 1967

69 Matías Braun, "Analysis of the stress intensity factor dependence with the crack velocity using a lattice model" Wiley 42 (42): 1075-1084, 2019

70 G. R. Irwin, "Analysis of Stresses and Strains Near the End of a Crack Traversing a Plate" ASME International 24 (24): 361-364, 1957

71 Wen Hua, "An extended maximum tangential strain energy density criterion considering T‐stress for combined mode I–III brittle fracture" Wiley 44 (44): 169-181, 2020

72 Grzegorz Ludwik Golewski, "An assessment of microcracks in the Interfacial Transition Zone of durable concrete composites with fly ash additives" Elsevier BV 200 : 515-520, 2018

73 Fenghua Zhou, "A rate-dependent cohesive model for simulating dynamic crack propagation in brittle materials" Elsevier BV 72 (72): 1383-1410, 2005

74 M. Braun, "A progressive damage based lattice model for dynamic fracture of composite materials" Elsevier BV 200 : 108335-, 2020

75 M. Braun, "A numerical study of progressive damage in unidirectional composite materials using a 2D lattice model" Elsevier BV 249 : 107767-, 2021

76 Marek Romanowicz, "A non-local stress fracture criterion accounting for the anisotropy of the fracture toughness" Elsevier BV 214 : 544-557, 2019

77 Zhi-Min Wu, "A new test method for the complete load-displacement curve of concrete under mixed mode I-II fracture" Elsevier BV 108 : 102629-, 2020

78 Grzegorz Ludwik Golewski, "A new principles for implementation and operation of foundations for machines: A review of recent advances" 국제구조공학회 71 (71): 317-327, 2019

79 Z. Daneshjoo, "A new mixed mode I/II failure criterion for laminated composites considering fracture process zone" Elsevier BV 98 : 48-58, 2018

80 Mahdi Fakoor, "A new macro-mechanical approach for investigation of damage zone effects on mixed mode I/II fracture of orthotropic materials" Springer Science and Business Media LLC 229 (229): 3537-3556, 2018

81 T.A.C.M. van der Put, "A new fracture mechanics theory for orthotropic materials like wood" Elsevier BV 74 (74): 771-781, 2007

82 S.Q. Zhang, "A new criterion for composite material mixed mode fracture analysis" Elsevier BV 34 (34): 749-769, 1989

83 Mahdi Fakoor, "A new approach for investigation of damage zone properties in orthotropic materials" Growing Science 2 (2): 283-292, 2014

84 Bin Sun, "A minimum Lemaitre's damage strain energy release rate-based model for competitive fracture process simulation of quasi-brittle materials" Elsevier BV 109 : 102705-, 2020

85 Z. Daneshjoo, "A micromechanical model for prediction of mixed mode I/II delamination of laminated composites considering fiber bridging effects" Elsevier BV 94 : 46-56, 2018

86 Mahdi Fakoor, "A micromechanical approach for mixed mode I/II failure assessment of cracked highly orthotropic materials such as wood" Elsevier BV 109 : 102740-, 2020

87 Zahra Khaji, "A Semi-theoretical criterion based on the combination of strain energy release rate and strain energy density concepts (STSERSED): Establishment of a new approach to predict the fracture behavior of orthotropic materials" Elsevier BV 118 : 103290-, 2022

88 Mahdi Fakoor, "A New Approach for Investigation of Mode II Fracture Toughness in Orthotropic Materials" FapUNIFESP (SciELO) 15 (15): 2018