본 연구에서는 RF/DC 마그네트론 증착법을 이용하여 유리 기판 상에 실온에서 TIZO/Ag/TIZO 다층막 투명전극 필름을 증착하였다. 전체 박막 두께 60 nm TIZO/Ag/TIZO (10 nm/10 nm/40 nm)로 이루어진 다층막...
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
https://www.riss.kr/link?id=A108014278
2022
-
KCI등재,SCOPUS,ESCI
학술저널
50-57(8쪽)
0
0
상세조회0
다운로드국문 초록 (Abstract)
본 연구에서는 RF/DC 마그네트론 증착법을 이용하여 유리 기판 상에 실온에서 TIZO/Ag/TIZO 다층막 투명전극 필름을 증착하였다. 전체 박막 두께 60 nm TIZO/Ag/TIZO (10 nm/10 nm/40 nm)로 이루어진 다층막...
본 연구에서는 RF/DC 마그네트론 증착법을 이용하여 유리 기판 상에 실온에서 TIZO/Ag/TIZO 다층막 투명전극 필름을 증착하였다. 전체 박막 두께 60 nm TIZO/Ag/TIZO (10 nm/10 nm/40 nm)로 이루어진 다층막의 경우 650 nm에서 투과도는 86.5%, 면저항 값은 8.1 Ω/□를 나타냈으며, 적외선(열선)을 효과적으로 차단할 수 있는 투과도 특성 때문에 향후 에너지 절약형 스마트 윈도우로서의 적용도 가능할 것으로 판단된다. TIZO/Ag/TIZO 다층막 투명전극을 적용한 폴리에스터 아크릴레이트 기반 고분자분산액정(polymer-dispersed liquid crystal, PDLC) 시스템에 있어서 액정과 prepolymer의 함량비, PDLC 코팅층의 두께 및 자외선 세기 변화에 따른 전기광학 특성 및 표면 형태학에 미치는 영향이 조사되었다. 15 μm의 PDLC 층 두께에 1.5 mW/cm2의 UV 세기로 광경화된 TIZO/Ag/TIZO 다층막 투명전극 적용 PDLC 셀이 전반적으로 양호한 구동 전압과 on-state 투과도 및 뛰어난 off haze를 나타냈으며, PDLC 복합체의 고분자 매트릭스 표면에 형성된 액정 droplet들은 입사광을 효율적으로 산란시킬 수 있는 1~3 μm 크기를 갖고 있었다. 또한, 본 연구에서 제조된 TIZO/Ag/TIZO 다층막 투명전극 적용 PDLC 기반 스마트 윈도우는 연한 갈색의 색조를 띠고 있어서 심미적 측면에서 색다른 장점을 부여할 것으로 기대된다.
다국어 초록 (Multilingual Abstract)
Ti-In-Zn-O (TIZO)/Ag/TIZO multilayer transparent electrodes were prepared on glass substrates at room temperature using RF/DC magnetron sputtering. Obtained multilayer structure comprising TIZO/Ag/TIZO (10 nm/10 nm/40 nm) with the total thickness of 6...
Ti-In-Zn-O (TIZO)/Ag/TIZO multilayer transparent electrodes were prepared on glass substrates at room temperature using RF/DC magnetron sputtering. Obtained multilayer structure comprising TIZO/Ag/TIZO (10 nm/10 nm/40 nm) with the total thickness of 60 nm showed a transmittance of 86.5% at 650 nm and a sheet resistance of 8.1 Ω/□. The multilayer films were expected to be applicable for use in energy-saving smart window based on polymer-dispersed liquid crystal (PDLC) because of their transmittance properties to effectively block infrared rays (heat rays). We investigated the effects of the content ratio of prepolymer, the thickness of the PDLC coating layer, and the ultraviolet (UV) light intensity on electro-optical properties, and the surface morphology of polyester acrylate-based PDLC systems using new TIZO/Ag/TIZO transparent conducting electrodes. A PDLC cell with a thickness of 15 μm PDLC layer photocured at an UV intensity of 1.5 mW/cm2 exhibited good driving voltage, favorable on-state transmittance, and excellent off-haze. The LC droplets formed on the surface of the polymer matrix of the PDLC composite had a size range of 1 to 3 μm capable of efficiently scattering incident light. Also, the PDLC-based smart window manufactured using TIZO/Ag/TIZO multi-layered transparent electrodes in this study exhibited a light brown, which will have an advantage in terms of aesthetics.
참고문헌 (Reference)
1 조정대 ; 김양배 ; 허기석 ; 김은미 ; 홍진후, "투명 전도성 ZITO/Ag/ZITO 다층막 필름 적용을 위한 아크릴레이트 기반 고분자분산액정의 전기광학적 특성 최적화" 한국공업화학회 31 (31): 291-298, 2020
2 신용우 ; 김규병 ; 노수진 ; 소순영, "은 나노입자의 크기 및 형태가 자가조립 망상구조를 갖는투명전도성 필름의 광학 및 전기 특성에 미치는 영향" 한국공업화학회 29 (29): 162-167, 2018
3 Y. Park, "Work function of indium tin oxide transparent conductor measured by photoelectron spectroscopy" 68 : 2699-2701, 1996
4 E. M. Kim, "Transparent conductive ZnInSnO-Ag-ZnInSnO multilayer films for polymer dispersed liquidcrystal based smart windows" 53 : 095505-, 2014
5 C. Guillén, "Transparent conductive ITO/Ag/ITO multilayer electrodes deposited by sputtering at room temperature" 282 : 574-578, 2009
6 D. Hatice, "Timothy, Kinetics of photopolymerization-induced phase separation and morphology development in mixtures of a nematic liquid crystal and multifunctional acrylate" 49 : 534-545, 2008
7 C. E. Hoyle, "Thiol-enes: chemistry of the past with promise for the future" 42 : 5301-5338, 2004
8 D. S. Liu, "Thermal stability of indium tin oxide thin films co-sputtered with zinc oxide" 516 : 3196-3203, 2008
9 M. Kashima, "The influence of crosslinking agents on the morphology and electro‐optical performances of PDLC films" 117 : 3434-3440, 2010
10 X. Liu, "The design of ZnS/Ag/ZnS transparent conductive multilayer films" 441 : 200-206, 2003
1 조정대 ; 김양배 ; 허기석 ; 김은미 ; 홍진후, "투명 전도성 ZITO/Ag/ZITO 다층막 필름 적용을 위한 아크릴레이트 기반 고분자분산액정의 전기광학적 특성 최적화" 한국공업화학회 31 (31): 291-298, 2020
2 신용우 ; 김규병 ; 노수진 ; 소순영, "은 나노입자의 크기 및 형태가 자가조립 망상구조를 갖는투명전도성 필름의 광학 및 전기 특성에 미치는 영향" 한국공업화학회 29 (29): 162-167, 2018
3 Y. Park, "Work function of indium tin oxide transparent conductor measured by photoelectron spectroscopy" 68 : 2699-2701, 1996
4 E. M. Kim, "Transparent conductive ZnInSnO-Ag-ZnInSnO multilayer films for polymer dispersed liquidcrystal based smart windows" 53 : 095505-, 2014
5 C. Guillén, "Transparent conductive ITO/Ag/ITO multilayer electrodes deposited by sputtering at room temperature" 282 : 574-578, 2009
6 D. Hatice, "Timothy, Kinetics of photopolymerization-induced phase separation and morphology development in mixtures of a nematic liquid crystal and multifunctional acrylate" 49 : 534-545, 2008
7 C. E. Hoyle, "Thiol-enes: chemistry of the past with promise for the future" 42 : 5301-5338, 2004
8 D. S. Liu, "Thermal stability of indium tin oxide thin films co-sputtered with zinc oxide" 516 : 3196-3203, 2008
9 M. Kashima, "The influence of crosslinking agents on the morphology and electro‐optical performances of PDLC films" 117 : 3434-3440, 2010
10 X. Liu, "The design of ZnS/Ag/ZnS transparent conductive multilayer films" 441 : 200-206, 2003
11 M. Möller, "Switchable electrochromic images based on a combined top-down bottom-up approach" 16 : 1558-1562, 2004
12 D. Kim, "Study of electrochemical and electrochromic properties of 9-methy1-2,3,6,7-tetramethoxyfluorene in dichloromethane-TFATFAn(I)" 2 : 73-78, 1997
13 D. Barrios, "Simulation of the thickness dependence of the optical properties of suspended particle devices" 143 : 613-622, 2015
14 T. Minami, "Present status and future prospects for development of non- or reduced-indium transparent conducting oxide thin films" 517 : 1474-1477, 2008
15 S. H. Hwang, "Preparation of newly designed reverse mode polymer dispersed liquid crystals and its electro-optic characteristics" 470 : 163-171, 2007
16 J. D. Cho, "Optimization of LC droplet size and electro‐optical properties of acrylate‐based polymer‐dispersed liquid crystal by controlling photocure rate" 130 : 3098-3104, 2013
17 M. Fahland, "Low resisitivity transparent electrodes for displays on polymer substrates" 392 : 334-337, 2001
18 J. W. Doane, "Liquid Crystals: Applications and Uses" World Scientific 361-, 1990
19 P.S. Drzaic, "Liquid Crystal Dispersions" World Scientific 1995
20 J. B. Whitehead Jr, "Light scattering from a dispersion of aligned nematic droplets" 73 : 1057-, 1993
21 J. Cui, "Indium tin oxide alternatives-high work function transparent conducting oxides as anodes for organic light‐emitting diodes" 13 : 1476-1480, 2001
22 S. W. Cho, "Highly flexible, transparent, and low resistance indium zinc oxide-Ag-indium zinc oxide multilayer anode on polyethylene terephthalate substrate for flexible organic light lightemitting diodes" 516 : 7881-7885, 2008
23 J. Lewis, "Highly flexible transparent electrodes for organic light-emitting diode-based displays" 85 : 3450-3452, 2004
24 K. H. Choi, "Highly flexible and transparent InZnSnOx/Ag/InZnSnOx multilayer electrode for flexible organic light emitting diodes" 92 : 223302-, 2008
25 Kee-Jeong Yang ; 윤도영, "Electro-optical characteristics of dye-doped polymer dispersed liquid crystals" 한국공업화학회 17 (17): 543-548, 2011
26 Y. S. No, "Effect of alignment layer on electro-optic properties of polymer-dispersed liquid crystal displays" 513 : 98-105, 2009
27 M. Bender, "Dependence of film composition and thicknesses on optical and electrical properties of ITO-metal-ITO multilayers" 326 : 67-71, 1998
28 T. J. White, "Contribution of monomer functionality and additives to polymerization kinetics and liquid crystal phase separation in acrylate based polymer dispersed liquid crystals (PDLCs)" 34 : 1377-1385, 2007
29 S. Ito, "Conductive and transparent multilayer films for low-temperature-sintered mesoporous TiO2electrodes of dye-sensitized solar cells" 15 : 2824-2828, 2003
30 G. S. Heo, "Combinatorial growth and analysis of Ti-In-Zn-O films deposited by radio‐frequency and direct-current magnetron co-sputtering system" 520 : 7083-7086, 2012
31 T. Fujisawa, "An analysis of photo-polymerization induced phase separation process in liquid crystal/polymer composite films" 366 : 107-116, 2001
열수탄화를 통해 kenaf로부터 hydrochar생산과 공정 조건에 따른 hydrochar 특성에 끼치는 영향
학술지 이력
연월일 | 이력구분 | 이력상세 | 등재구분 |
---|---|---|---|
2023 | 평가예정 | 해외DB학술지평가 신청대상 (해외등재 학술지 평가) | |
2020-01-01 | 평가 | 등재학술지 유지 (해외등재 학술지 평가) | |
2013-12-01 | 평가 | SCOPUS 등재 (등재유지) | |
2011-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2010-02-19 | 학술지명변경 | 외국어명 : Journal of the Korean Industrial and Engineering Chemistry -> Applied Chemistry for Engineering | |
2009-04-28 | 학술지명변경 | 외국어명 : Jpurnal of the Korean Industrial and Engineering Chemistry -> Journal of the Korean Industrial and Engineering Chemistry | |
2009-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2007-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2005-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2002-01-01 | 평가 | 등재학술지 선정 (등재후보2차) | |
1999-07-01 | 평가 | 등재후보학술지 선정 (신규평가) |
학술지 인용정보
기준연도 | WOS-KCI 통합IF(2년) | KCIF(2년) | KCIF(3년) |
---|---|---|---|
2016 | 0.32 | 0.32 | 0.34 |
KCIF(4년) | KCIF(5년) | 중심성지수(3년) | 즉시성지수 |
0.33 | 0.33 | 0.45 | 0.05 |