Experimental and Computational Study on the Mold Shrinkage of PPS Resin in Injection Molded Specimen = Experimental and Computational Study on the Mold Shrinkage of PPS Resin in Injection Molded Specimen

다국어 초록 (Multilingual Abstract)

In this study, molding shrinkage of PPS resin was investigated. Two types of PPS resins with differing glass fiber and calcium carbonate content were used for this purpose. To observe mold shrinkage, molding conditions based on injection temperature, injection speed, and the position of the cushion were selected. Circular and rectangular specimens were used for the study model. Injection molding simulation was performed to predict the filling pattern and mold shrinkage, and the simulation results were compared with the experimental conclusions. It was observed that the mold shrinkage showed the highest shrinkage (distributed from 0.05% to 0.32%) dependence on the injection temperature, and the lowest shrinkage (distributed from 0.05% to 0.31%) dependence on the injection speed. The role of the position of the cushion in mold shrinkage was difficult to observe. The results of the simulation mostly agreed with the experimental results; however, for some molding conditions, the mold shrinkage in the simulation was overestimated as compared to that in the experiment.

참고문헌 (Reference)

1 이민, "유리섬유로 보강된 수지에서 제품설계 및 성형조건에 따른 휨의 연구: Part 2. 결정성 수지" 한국고분자학회 36 (36): 677-684, 2012

2 이민, "유리섬유로 보강된 수지에서 제품설계 및 성형조건에 따른 휨의 연구: Part 1. 비결정성 수지" 한국고분자학회 36 (36): 555-563, 2012

3 박재웅, "사출성형의 2차원 및 3차원 해석의 비교에 관한 연구" 한국고무학회 47 (47): 347-354, 2012

4 F. W. Billmeyer, Jr., "Textbook of Polymer Science" John Wiley & Sons 457-, 1984

5 J. L. White, "Principles of Polymer Engineering Rheology" John Wiley & Sons 33-, 1990

6 R. A. Malloy, "Plastic Part Design for Injection Molding" Hanser 63-, 1994

7 J. Z. Liang, "Mechanical Properties of PPS/PC/GF/Nano-CaCO3 Hybrid Composites" 48 : 292-, 2009

8 ED&C, "Autodesk Moldflow Insight: The 4th edition of AMI Korean Manual"