니켈도금된 S45C강의 연속파형 Nd:YAG 레이저 겹치기용접 특성 = Characteristics of CW Nd:YAG Laser Lap Welds of Nickel Coated S45C Steel

다국어 초록 (Multilingual Abstract)

Laser welding process is widely used in the industrial field due to its numerous advantages: a small heat affected zone(HAZ), deep penetration, high welding speed, ease of automation, single-pass thick section capability, enhanced design flexibility, and small distortion after welding. The objective of this research works is to investigate the influence of the process parameters, such as the welding fur metals with CW Nd:YAG lasers. The bead-on-plate and Lap welding experiments are carried out for several combinations of the experimental conditions. In order to quantitatively examine the characteristics of the welding quality of the cross section, tensile stress behavior and the hardness of the welded part are investigated in comparison of the Nickel coated and Nickel uncoated S45C steel. As a result of experiment, nickel coated S45C Steel showed more even weld zone than Nickel uncoated counterpart upon lap welding. Also, it showed relatively small amount of internal defects and spatter, and Nickel coated S45C showed better weldability than Nickel uncoated S45C steel. The optimum welding process upon lap welding of Nickel coated S45C steel is when each laser power is 1900W; focal positions is -1mm; welding speed is $0.9{\sim}1.0m/min$. The heat input was $4.178{\sim}4.36{\times}103J/cm^2$.

참고문헌 (Reference)

1 "Welding behavior betwen Zn-coated steel plate and free cuting carbon steel rod by Nd:YAG laser beam" 4 : 30-39, 2001

2 "The Weldability of 6mt"

3 "Optimizing the laser- w e l d e d b u t j o i n t s o f m e d i u m c a r b o n s t e l u s i n g R S M" 164 (164): 986-989, 2005

4 "On crack susceptibility in the submerged arc welding of medium-carbon stel plates" 68 : 43-49, 1997

5 "Laser Welding of Hem Flange Joints" F11-F20, 2000

6 "LIA Handbok of Laser Materials processing" LIA. Magnolia Publishing Inc. 223-262, 2001

7 "Efect of laser welding parameters on the heat input and weld-bead profile" 164 (164): 978-985, 2005

8 "Bridging the joint gap wire feed laser welding" 87 : 213-222, 1999

9 "An AN and Taguchi algorithms integrated aproach to the optimization of CO2 laser welding" 2006

10 "A study on the feasibility of partial penetration laser welding for the lap joint of 390MPa high strength steel sheets" in Korean 20 (20): 76-82, 2002