평면충돌제트에 의한 고온 판 냉각과정의 열전달 해석

다국어 초록 (Multilingual Abstract)

Water jet impingement cooling is used to remove heat from high-temperature surfaces such as hot steel plates in the steel manufacturing process (thermo-mechanical cooling process; TMCP). In those processes, uniform cooling is the most critical factor to ensure high strength steel and good quality. In this study, experiments are performed to measure the heat transfer coefficient together with the inverse heat conduction problem (IHCP) analysis for a plate cooled by planar water jet. In the inverse heat transfer analysis, spatial and temporal variations of heat transfer coefficient, with no information regarding its functional form, are determined by employing the conjugate gradient method with an adjoint problem. To estimate the two dimensional distribution of heat transfer coefficient and heat flux for planar waterjet cooling, eight thermo-couple are installed inside the plate. The results show that heat transfer coefficient is approximately uniform in the span-wise direction in the early stage of cooling. In the later stage where the forced-convection effect is important, the heat transfer coefficient becomes larger in the edge region. The surface temperature vs. heat flux characteristics are also investigated for the entire boiling regimes. In addition, the heat transfer rate for the two different plate geometries are compared at the same Reynolds number.

목차 (Table of Contents)

• Abstract
• 1. 서론
• 2. 실험장치 및 방법
• 3. 역열전달법
• 4. 실험결과 및 고찰
• 5. 결론
• 후기
• 참고문헌

참고문헌 (Reference)

1 조형희, "평면충돌제트에 의한 단상 및 비등 열전달의 국소적 측정" 대한기계학회 28 (28): 895-901, 2004

2 강덕홍, "역해석을 이용한 가열로 내 소재의 1차원 열유속 추정에 관한 연구" 대한기계학회 27 (27): 9-68, 2003

3 Wang, T. Y., "Thermal-ADI; A Linear-Time Chip-Level Dynamic Thermal-Simulation Algorithm Based on Alternating-Direction-Implicit(ADI) Method" 11 (11): 691-700, 2003

4 Lee, P. J., "The Effect of Ambient Air Condition on a Hot Steel Plate Cooled by Impinging Water Jet" 24 (24): 29-38, 2000

5 Ohkubo, H., "Study on Accurate Prediction of Heat Transfer Characteristics of Mist Cooling(Effects of Surface Wettability)" 33 (33): 326-332, 1990

6 Zumbrunnen, D. A., "Method and Apparatus for Measuring Heat Transfer Distributions on Moving and Stationary Plates Cooled by a Planar Liquid Jet" 3 : 202-213, 1990

7 Choi, K. J., "Mechanisms of Film Boiling Heat Transfer of Normally Impacting Spray" 30 (30): 311-318, 1987

8 Alifanov, O. M., "Inverse Heat Transfer Problems" Springer-Verlag 1994

9 Beck, J. V., "Inverse Heat Conduction Ill-Posed Problems" A Wiley-Interscience Publication 1985

10 Kim, S. K., "Implementation of Inverse Method for Estimating Undetermined Boundary in a Two-Dimensional Slab Based on Temperature Measurement" 46 : 515-523, 2004

11 Xu, F., "Heat Transfer Behavior in the Impingement Zone Under Circular Water Jet" 49 : 3785-3788, 2006

12 Al-Ahamdi, H. M., "Experimental Study on the Spray Cooling of High Temperature Metal Using Full Cone Industrial Sprays" 365-374, 2002

13 Baonga, J. B., "Experimental Study of the Hydrodynamic and Heat Transfer of Free Liquid Jet Impinging a Flat Circular Heated Disk" 26 : 1125-1138, 2006

14 Lee, P. J., "Effect of Nozzle Height on Heat Transfer of a Hot Steel Plate Cooled by an Impinging Water Jet" 27 (27): 668-676, 2003

15 Buckingham, F. P., "Cooling of High-Temperature Cylindrical Surfaces Using a Water-Air Spray" 117 : 1018-1027, 1995

16 Colaço, M. J., "Comparison of Different Versions of the Conjugate Gradient Method of Function Estimation" 36 : 229-249, 1999

17 Kim, W. S., "Alternate Application of Regular and Modified Conjugated Gradient Method" 1 (1): 217-234, 1999

18 Vader, D. T., "A Method for Measuring Steady Local Heat Transfer to an Impinging Liquid Jet" 4 : 1-11, 1991