Electrical Capacitance Volume Tomography를 이용한 원뿔형 분사층 급속열분해 반응기 내 다상유동 특성 연구

다국어 초록 (Multilingual Abstract)

This study aims to investigate the behavior characteristics of solid particles within conical spouted beds depending on the inlet gas velocity. Electrical capacitance volume tomography was applied to the measurements of the instantaneous gas-solid flow structures in a conical spouted bed. The effects of inlet gas velocity on the solid volume fraction and pressure were investigated. The different inlet gas velocities showed a certain influence on the gas?solid flow behaviors in the conical spouted bed. A symmetric core-annulus structure in the conical spouted bed was observed. Solid particles in the core and annulus areas were mixed at the ratio U/Ums = 1.6. It would be efficient to operate a fast pyrolysis reactor for the high heat and mass transfer of waste woods and sand particles.

참고문헌 (Reference)

1 박훈채, "압력변동 해석을 통한 바이오매스 급속열분해 원뿔형 분사층 반응기의 수력학적 특성 연구" 한국폐기물자원순환학회 32 (32): 444-452, 2015

2 "Tech4Imaging : 36-channel electrical capacitance volume tomography data acquisition system and image reconstruction software user's manual, Tech4Imaging LLC, Columbus"

3 Seoul National University of Technology, "Study of improved management system and recycling options of waste wood" National Institute of Environmental Research 2007

4 Kaushal, P., "Steam assisted biomass gasification-an overview" 90 (90): 1043-1058, 2012

5 Korea Environment Corporation, "Status of waste generation and treatment 2015" Ministry of Environment 2016

6 Xu, J., "Statistical and frequency analysis of pressure fluctuations in spouted beds" 140 (140): 141-154, 2004

7 Epstein, N., "Spouted and spout-fluid beds fundamentals and applications" Cambridge University Press 2011

8 Bridgwater, A. V., "Review of fast pyrolysis of biomass and product upgrading" 38 : 68-94, 2012

9 Czernik, S., "Overview of applications of biomass fast pyrolysis oil" 18 (18): 590-598, 2004

10 Miguel, G. S., "New advances in the fast pyrolysis of biomass" 6 (6): 193-203, 2012

11 Van Ommen, J. R., "Measuring the gas-solids distribution in fluidized beds - A review" 6 : 1-29, 2008

12 Amutio, M., "Influence of temperature on biomass pyrolysis in a conical spouted bed reactor" 59 : 23-31, 2012

13 Venderbosch, R. H., "Fast pyrolysis technology development" 4 (4): 178-208, 2010

14 Oliveira, W. P., "Evaluation of flow regimes in a semi cylindrical spouted bed through statistical, mutual information, spectral and Hurst's analysis" 86 (86): 582-597, 2008

15 Warsito, W., "Electrical capacitance volume tomography" 7 (7): 525-535, 2007

16 Wang, F., "Electrical capacitance volume tomography" 10 (10): 1890-1917, 2010

17 윤주영, "D시 발생 폐목재의 SRF 전환을 위한 물리·화학적 특성 조사" 한국폐기물자원순환학회 32 (32): 429-435, 2015

18 Oppenheim, A. V., "Discrete-time signal processing, 2nd ed" Prentice-Hall 1999

19 National Institute of Forest Science, "Development of recycling technology and system of wood wastes" Ministry of Agriculture and Forestry 2006

20 San Jose, M. J., "Correlation for calculation of the gas dispersion coefficient in conical spouted beds" 50 (50): 2161-2172, 1995

21 Sari, S., "Characterization of gas-solid flow in conical spouted beds operating with heavy particles" 40 : 132-139, 2012

22 Mollick, P. K., "Assessment of stability of spouted bed using pressure fluctuation analysis" 51 (51): 12117-12125, 2012

23 Marreto, R. N., "Analysis of pressure fluctuations during water evaporation in spouted bed" 87 (87): 386-393, 2009

24 Bridgwater, A. V., "An overview of fast pyrolysis of biomass" 30 (30): 1479-1493, 1999

25 Seoul National University of Science and Technology, "A study on preparation of waste wood material recycling" Ministry of Environment 2012

26 Butler, E., "A review of recent laboratory research and commercial developments in fast pyrolysis and upgrading" 15 (15): 4171-4186, 2011